[PATCH v2 6/7] clk: sunxi: drop CLK_IGNORE_UNUSED

[Emilio López]

This flag was in place to prevent important clocks from getting gated
while they had no users. Now that the UART driver supports clocks
properly, we can drop this.

Signed-off-by: Emilio López <emilio at elopez.com.ar>
---

Changes from v1:
  - no changes

 drivers/clk/sunxi/clk-sunxi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 244de90..daa51ab 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -41,8 +41,8 @@ static void __init sunxi_osc_clk_setup(struct device_node *node)
 
 	parent = of_clk_get_parent_name(node, 0);
 
-	clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
-				reg, SUNXI_OSC24M_GATE, 0, &clk_lock);
+	clk = clk_register_gate(NULL, clk_name, parent, 0, reg,
+				SUNXI_OSC24M_GATE, 0, &clk_lock);
 
 	if (clk) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
@@ -198,8 +198,8 @@ static void __init sunxi_factors_clk_setup(struct device_node *node,
 
 	parent = of_clk_get_parent_name(node, 0);
 
-	clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
-				   reg, data->table, data->getter, &clk_lock);
+	clk = clk_register_factors(NULL, clk_name, parent, 0, reg,
+				   data->table, data->getter, &clk_lock);
 
 	if (clk) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
-- 
1.8.2