[PATCH 1/9] MXS/i.MX28: add the possibility to define the used crystals via device tree

Shawn Guo shawn.guo at linaro.org
Thu Mar 7 01:17:52 EST 2013


For patches that you intend to go via mxs tree, please prefix it with
something like "ARM: mxs: ...".

On Mon, Mar 04, 2013 at 03:05:40PM +0100, Steffen Trumtrar wrote:
> From: Juergen Beisert <jbe at pengutronix.de>
> 
Please do something with commit log.

> Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  arch/arm/boot/dts/imx28.dtsi |   11 +++++++++++
>  drivers/clk/mxs/clk-imx28.c  |   16 +++++++++++++++-
>  2 files changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 7ba4966..958bd10 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -37,6 +37,17 @@
>  		};
>  	};
>  
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		osc24m: system_oscillator {
> +			compatible = "fsl,mxs-system", "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
>  	apb at 80000000 {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
> index 76ce6c6..01048b5 100644
> --- a/drivers/clk/mxs/clk-imx28.c
> +++ b/drivers/clk/mxs/clk-imx28.c
> @@ -158,7 +158,21 @@ int __init mx28_clocks_init(void)
>  
>  	clk_misc_init();
>  
> -	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
> +	/* retrieve the crystal's frequencies from device tree */
> +	for_each_compatible_node(np, NULL, "fixed-clock") {
> +		u32 rate;
> +
> +		if (of_property_read_u32(np, "clock-frequency", &rate))
> +			continue;
> +
> +		if (of_device_is_compatible(np, "fsl,mxs-system"))
> +			clks[ref_xtal] = mxs_clk_fixed("ref_xtal", rate);
> +	}
> +
> +	/* if not set, guess their frequency */
> +	if (clks[ref_xtal] == NULL)
> +		clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
> +

I think ref_xtal has to be 24 MHz, no?

Shawn

>  	clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000);
>  	clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000);
>  	clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




More information about the linux-arm-kernel mailing list