[PATCH V2 13/17] ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT

[Jon Hunter]

When booting with device-tree, retrieve GPMC settings for NAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.

Signed-off-by: Jon Hunter <jon-hunter at ti.com>
---
 arch/arm/mach-omap2/gpmc-nand.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index d673155..260915a 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -135,12 +135,16 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 			return err;
 		}
 
-		s.device_nand = true;
-
-		/* Enable RD PIN Monitoring Reg */
-		if (gpmc_nand_data->dev_ready) {
-			s.wait_on_read = true;
-			s.wait_on_write = true;
+		if (gpmc_nand_data->of_node) {
+			gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+		} else {
+			s.device_nand = true;
+
+			/* Enable RD PIN Monitoring Reg */
+			if (gpmc_nand_data->dev_ready) {
+				s.wait_on_read = true;
+				s.wait_on_write = true;
+			}
 		}
 
 		if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-- 
1.7.10.4