[PATCH 01/13] ARM: shmobile: use GPIO SD-card detection on armadillo800eva
Simon Horman
horms+renesas at verge.net.au
Mon Mar 18 07:59:28 EDT 2013
From: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO
card detection, which provides maximum power saving and automatically
selects IRQ or polling mode, depending on the CD GPIO capability.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/board-armadillo800eva.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 04eff93..60694e8 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -579,10 +579,10 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
- MMC_CAP_NEEDS_POLL,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
+ .cd_gpio = GPIO_PORT167,
};
static struct resource sdhi0_resources[] = {
@@ -623,7 +623,9 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
+ /* Port72 cannot generate IRQs, will be used in polling mode. */
+ .cd_gpio = GPIO_PORT72,
};
static struct resource sdhi1_resources[] = {
--
1.7.10.4
More information about the linux-arm-kernel
mailing list