[PATCH 1/3] ARM: at91: move non DT Kconfig to Kconfig.non_dt
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Thu Mar 7 09:21:51 EST 2013
This is the legacy platform support
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Ludovic Desroches <ludovic.desroches at atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/mach-at91/Kconfig | 714 ++++++------------------
arch/arm/mach-at91/{Kconfig => Kconfig.non_dt} | 157 +-----
2 files changed, 161 insertions(+), 710 deletions(-)
rewrite arch/arm/mach-at91/Kconfig (71%)
rename arch/arm/mach-at91/{Kconfig => Kconfig.non_dt} (71%)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
dissimilarity index 71%
index 6071f4c..98c2e05 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,554 +1,160 @@
-if ARCH_AT91
-
-config HAVE_AT91_DATAFLASH_CARD
- bool
-
-config HAVE_AT91_DBGU0
- bool
-
-config HAVE_AT91_DBGU1
- bool
-
-config AT91_SAM9_ALT_RESET
- bool
- default !ARCH_AT91X40
-
-config AT91_SAM9G45_RESET
- bool
- default !ARCH_AT91X40
-
-config SOC_AT91SAM9
- bool
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-menu "Atmel AT91 System-on-Chip"
-
-comment "Atmel AT91 Processor"
-
-config SOC_AT91RM9200
- bool "AT91RM9200"
- select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-config SOC_AT91SAM9260
- bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
- select HAVE_AT91_DBGU0
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
- or AT91SAM9G20 SoC.
-
-config SOC_AT91SAM9261
- bool "AT91SAM9261 or AT91SAM9G10"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
-
-config SOC_AT91SAM9263
- bool "AT91SAM9263"
- select HAVE_AT91_DBGU1
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
-
-config SOC_AT91SAM9RL
- bool "AT91SAM9RL"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
-
-config SOC_AT91SAM9G45
- bool "AT91SAM9G45 or AT91SAM9M10 families"
- select HAVE_AT91_DBGU1
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
- This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-
-config SOC_AT91SAM9X5
- bool "AT91SAM9x5 family"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
- This means that your SAM9 name finishes with a '5' (except if it is
- AT91SAM9G45!).
- This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
- and AT91SAM9X35.
-
-config SOC_AT91SAM9N12
- bool "AT91SAM9N12 family"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using Atmel's AT91SAM9N12 SoC.
-
-choice
- prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
- bool "None"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
- bool "AT91SAM9G20"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
- bool "AT91SAM9G45"
- select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
- bool "AT91x40"
- depends on !MMU
- select ARCH_USES_GETTIMEOFFSET
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-endchoice
-
-config AT91_PMC_UNIT
- bool
- default !ARCH_AT91X40
-
-# ----------------------------------------------------------
-
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- help
- Select this if you are using KwikByte's KB920x board.
- <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
- bool "picotux 200"
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
- bool "ucDragon YL-9200"
- help
- Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
- bool "Eukrea CPUAT91"
- help
- Select this if you are using the Eukrea Electromatique's
- CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
- bool "eco920"
- help
- Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
- bool "RSI Embedded Webserver"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
- bool "CALAO USB-A9260"
- help
- Select this if you are using a Calao Systems USB-A9260.
- <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
- bool "CALAO QIL-A9260 board"
- help
- Select this if you are using a Calao Systems QIL-A9260 Board.
- <http://www.calao-systems.com>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
- bool "CALAO USB-A9263"
- help
- Select this if you are using a Calao Systems USB-A9263.
- <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
- bool "Acme Systems srl FOX Board G20"
- help
- Select this if you are using Acme Systems
- FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_USB_A9G20
- bool "CALAO USB-A9G20"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using a Calao Systems USB-A9G20.
- <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- help
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
-
-comment "Generic Board Type"
-
-config MACH_AT91RM9200_DT
- bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
- depends on SOC_AT91RM9200
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel RM9200 Evaluation Kit.
-
-config MACH_AT91SAM_DT
- bool "Atmel AT91SAM Evaluation Kits with device-tree support"
- depends on SOC_AT91SAM9
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel Evaluation Kit.
-
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on HAVE_AT91_DATAFLASH_CARD
- help
- Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
-comment "AT91 Feature Selections"
-
-config AT91_PROGRAMMABLE_CLOCKS
- bool "Programmable Clocks"
- help
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-config AT91_SLOW_CLOCK
- bool "Suspend-to-RAM disables main oscillator"
- depends on SUSPEND
- help
- Select this if you want Suspend-to-RAM to save the most power
- possible (without powering off the CPU) by disabling the PLLs
- and main oscillator so that only the 32 KiHz clock is available.
-
- When only that slow-clock is available, some peripherals lose
- functionality. Many can't issue wakeup events unless faster
- clocks are available. Some lose their operating state and
- need to be completely re-initialized.
-
-config AT91_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- depends on ARCH_AT91
- default "128" if ARCH_AT91RM9200
- default "100"
- help
- On AT91rm9200 chips where you're using a system clock derived
- from the 32768 Hz hardware clock, this tick rate should divide
- it exactly: use a power-of-two value, such as 128 or 256, to
- reduce timing errors caused by rounding.
-
- On AT91sam926x chips, or otherwise when using a higher precision
- system clock (of at least several MHz), rounding is less of a
- problem so it can be safer to use a decimal values like 100.
-
-endmenu
-
-endif
+if ARCH_AT91
+
+config HAVE_AT91_DBGU0
+ bool
+
+config HAVE_AT91_DBGU1
+ bool
+
+config AT91_SAM9_ALT_RESET
+ bool
+ default !ARCH_AT91X40
+
+config AT91_SAM9G45_RESET
+ bool
+ default !ARCH_AT91X40
+
+config SOC_AT91SAM9
+ bool
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processor"
+
+config SOC_AT91RM9200
+ bool "AT91RM9200"
+ select CPU_ARM920T
+ select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_DBGU0
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
+config SOC_AT91SAM9260
+ bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+ select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9
+ help
+ Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+ or AT91SAM9G20 SoC.
+
+config SOC_AT91SAM9261
+ bool "AT91SAM9261 or AT91SAM9G10"
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+ help
+ Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+ bool "AT91SAM9263"
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+
+config SOC_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+
+config SOC_AT91SAM9G45
+ bool "AT91SAM9G45 or AT91SAM9M10 families"
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+ help
+ Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+ This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+ bool "AT91SAM9x5 family"
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+ help
+ Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+ This means that your SAM9 name finishes with a '5' (except if it is
+ AT91SAM9G45!).
+ This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+ and AT91SAM9X35.
+
+config SOC_AT91SAM9N12
+ bool "AT91SAM9N12 family"
+ select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
+ help
+ Select this if you are using Atmel's AT91SAM9N12 SoC.
+
+config AT91_PMC_UNIT
+ bool
+ default !ARCH_AT91X40
+
+# ----------------------------------------------------------
+
+source arch/arm/mach-at91/Kconfig.non_dt
+
+comment "Generic Board Type"
+
+config MACH_AT91RM9200_DT
+ bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
+ depends on SOC_AT91RM9200
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel RM9200 Evaluation Kit.
+
+config MACH_AT91SAM_DT
+ bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ depends on SOC_AT91SAM9
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
+
+# ----------------------------------------------------------
+
+comment "AT91 Feature Selections"
+
+config AT91_PROGRAMMABLE_CLOCKS
+ bool "Programmable Clocks"
+ help
+ Select this if you need to program one or more of the PCK0..PCK3
+ programmable clock outputs.
+
+config AT91_SLOW_CLOCK
+ bool "Suspend-to-RAM disables main oscillator"
+ depends on SUSPEND
+ help
+ Select this if you want Suspend-to-RAM to save the most power
+ possible (without powering off the CPU) by disabling the PLLs
+ and main oscillator so that only the 32 KiHz clock is available.
+
+ When only that slow-clock is available, some peripherals lose
+ functionality. Many can't issue wakeup events unless faster
+ clocks are available. Some lose their operating state and
+ need to be completely re-initialized.
+
+config AT91_TIMER_HZ
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ depends on ARCH_AT91
+ default "128" if ARCH_AT91RM9200
+ default "100"
+ help
+ On AT91rm9200 chips where you're using a system clock derived
+ from the 32768 Hz hardware clock, this tick rate should divide
+ it exactly: use a power-of-two value, such as 128 or 256, to
+ reduce timing errors caused by rounding.
+
+ On AT91sam926x chips, or otherwise when using a higher precision
+ system clock (of at least several MHz), rounding is less of a
+ problem so it can be safer to use a decimal values like 100.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig.non_dt
similarity index 71%
rename from arch/arm/mach-at91/Kconfig
rename to arch/arm/mach-at91/Kconfig.non_dt
index 6071f4c..6c24985 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -1,98 +1,8 @@
-if ARCH_AT91
+menu "Atmel Non-DT world"
config HAVE_AT91_DATAFLASH_CARD
bool
-config HAVE_AT91_DBGU0
- bool
-
-config HAVE_AT91_DBGU1
- bool
-
-config AT91_SAM9_ALT_RESET
- bool
- default !ARCH_AT91X40
-
-config AT91_SAM9G45_RESET
- bool
- default !ARCH_AT91X40
-
-config SOC_AT91SAM9
- bool
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-menu "Atmel AT91 System-on-Chip"
-
-comment "Atmel AT91 Processor"
-
-config SOC_AT91RM9200
- bool "AT91RM9200"
- select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-config SOC_AT91SAM9260
- bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
- select HAVE_AT91_DBGU0
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
- or AT91SAM9G20 SoC.
-
-config SOC_AT91SAM9261
- bool "AT91SAM9261 or AT91SAM9G10"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
-
-config SOC_AT91SAM9263
- bool "AT91SAM9263"
- select HAVE_AT91_DBGU1
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
-
-config SOC_AT91SAM9RL
- bool "AT91SAM9RL"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
-
-config SOC_AT91SAM9G45
- bool "AT91SAM9G45 or AT91SAM9M10 families"
- select HAVE_AT91_DBGU1
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
- This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-
-config SOC_AT91SAM9X5
- bool "AT91SAM9x5 family"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
- This means that your SAM9 name finishes with a '5' (except if it is
- AT91SAM9G45!).
- This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
- and AT91SAM9X35.
-
-config SOC_AT91SAM9N12
- bool "AT91SAM9N12 family"
- select HAVE_AT91_DBGU0
- select HAVE_FB_ATMEL
- select SOC_AT91SAM9
- help
- Select this if you are using Atmel's AT91SAM9N12 SoC.
-
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
@@ -140,10 +50,6 @@ config ARCH_AT91X40
endchoice
-config AT91_PMC_UNIT
- bool
- default !ARCH_AT91X40
-
# ----------------------------------------------------------
if ARCH_AT91RM9200
@@ -482,26 +388,6 @@ endif
# ----------------------------------------------------------
-comment "Generic Board Type"
-
-config MACH_AT91RM9200_DT
- bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
- depends on SOC_AT91RM9200
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel RM9200 Evaluation Kit.
-
-config MACH_AT91SAM_DT
- bool "Atmel AT91SAM Evaluation Kits with device-tree support"
- depends on SOC_AT91SAM9
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel Evaluation Kit.
-
-# ----------------------------------------------------------
-
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
@@ -510,45 +396,4 @@ config MTD_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
-# ----------------------------------------------------------
-
-comment "AT91 Feature Selections"
-
-config AT91_PROGRAMMABLE_CLOCKS
- bool "Programmable Clocks"
- help
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-config AT91_SLOW_CLOCK
- bool "Suspend-to-RAM disables main oscillator"
- depends on SUSPEND
- help
- Select this if you want Suspend-to-RAM to save the most power
- possible (without powering off the CPU) by disabling the PLLs
- and main oscillator so that only the 32 KiHz clock is available.
-
- When only that slow-clock is available, some peripherals lose
- functionality. Many can't issue wakeup events unless faster
- clocks are available. Some lose their operating state and
- need to be completely re-initialized.
-
-config AT91_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- depends on ARCH_AT91
- default "128" if ARCH_AT91RM9200
- default "100"
- help
- On AT91rm9200 chips where you're using a system clock derived
- from the 32768 Hz hardware clock, this tick rate should divide
- it exactly: use a power-of-two value, such as 128 or 256, to
- reduce timing errors caused by rounding.
-
- On AT91sam926x chips, or otherwise when using a higher precision
- system clock (of at least several MHz), rounding is less of a
- problem so it can be safer to use a decimal values like 100.
-
endmenu
-
-endif
--
1.7.10.4
More information about the linux-arm-kernel
mailing list