[PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow

Naveen Krishna Ch naveenkrishna.ch at gmail.com
Fri Mar 15 06:24:25 EDT 2013


Doug,

On 14 March 2013 02:10, Doug Anderson <dianders at chromium.org> wrote:
> Hook up the exynos5250-snow thermistors via the device tree now that
> there's a driver available to use them.
>
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
> Changes in v2:
> - Match 'uV' -> 'uv' change in Naveen's bindings.
>
>  arch/arm/boot/dts/cros5250-common.dtsi |  4 ++++
>  arch/arm/boot/dts/exynos5250-snow.dts  | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
> index 46c0980..f7cc835 100644
> --- a/arch/arm/boot/dts/cros5250-common.dtsi
> +++ b/arch/arm/boot/dts/cros5250-common.dtsi
> @@ -167,6 +167,10 @@
>                 status = "disabled";
>         };
>
> +       adc at 12D10000 {
> +               vdd-supply = <&buck5_reg>;
> +       };
> +
>         hdmi {
>                 hpd-gpio = <&gpx3 7 0xf 1 3>;
>         };
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index 17dd951..b78da7c 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -40,4 +40,35 @@
>                                 <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
>                 };
>         };
> +
> +       adc at 12D10000 {
> +               ncp15wb473 at 3 {
> +                       compatible = "ntc,ncp15wb473";
> +                       pullup-uv = <1800000>;
> +                       pullup-ohm = <47000>;
> +                       pulldown-ohm = <0>;
> +                       io-channels = <&adc 3>;
> +               };
> +               ncp15wb473 at 4 {
> +                       compatible = "ntc,ncp15wb473";
> +                       pullup-uv = <1800000>;
> +                       pullup-ohm = <47000>;
> +                       pulldown-ohm = <0>;
> +                       io-channels = <&adc 4>;
> +               };
> +               ncp15wb473 at 5 {
> +                       compatible = "ntc,ncp15wb473";
> +                       pullup-uv = <1800000>;
> +                       pullup-ohm = <47000>;
> +                       pulldown-ohm = <0>;
> +                       io-channels = <&adc 5>;
> +               };
> +               ncp15wb473 at 6 {
> +                       compatible = "ntc,ncp15wb473";
> +                       pullup-uv = <1800000>;
> +                       pullup-ohm = <47000>;
> +                       pulldown-ohm = <0>;
> +                       io-channels = <&adc 6>;
> +               };
> +       };
>  };
Thanks for the upload, i've tested with a similar changes.
> --
> 1.8.1.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
Shine bright,
(: Nav :)



More information about the linux-arm-kernel mailing list