[PATCH 0/2] gpio/omap: updates for v3.10

[Javier Martinez Canillas]

On Fri, Mar 1, 2013 at 6:22 PM, Jon Hunter <jon-hunter at ti.com> wrote:
> Summary of updates:
> - Convert OMAP GPIO driver to use linear mapping for IRQ domains
> - Avoid crashes seen if a gpio bank is not enabled when requesting an IRQ.
>
> Testing includes:
> - Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP
>   and AM335x EVM.
> - Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4,
>   OMAP3430 SDP and OMAP4430 SDP by making sure networking was working
>   correctly as these boards use a GPIO with the ethernet chips. Also
>   checked /proc/interrupts to ensure GPIO interrupt counts are
>   incrementing as expected.
>
> Jon Hunter (2):
>   gpio/omap: convert gpio irq domain to linear mapping
>   gpio/omap: warn if bank is not enabled on setting irq type
>
>  drivers/gpio/gpio-omap.c |   75 +++++++++++++++++++++-------------------------
>  1 file changed, 34 insertions(+), 41 deletions(-)
>
> --

I've tested on a TI OMAP3 DM3735 board (IGEPv2) and the ethernet chip
(which use a GPIO line as a IRQ) is working correctly too.

So, for both patches:

Tested-by: Javier Martinez Canillas <javier at dowhile0.org>