[PATCH v2 02/11] ARM: dts: OMAP5: Align the local timer dt node as per the current binding code

[Santosh Shilimkar]

It has been decided to not duplicate banked modules dt nodes and that is
how the current arch timer dt extraction code is.

Update the OMAP5 dt file accordingly.

Cc: Benoit Cousson <b-cousson at ti.com>

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |   19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b760c11..aefecf7 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -33,24 +33,19 @@
 	cpus {
 		cpu at 0 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				/* 14th PPI IRQ, active low level-sensitive */
-				interrupts = <1 14 0x308>;
-				clock-frequency = <6144000>;
-			};
 		};
 		cpu at 1 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				/* 14th PPI IRQ, active low level-sensitive */
-				interrupts = <1 14 0x308>;
-				clock-frequency = <6144000>;
-			};
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		/* 14th PPI IRQ, active low level-sensitive */
+		interrupts = <1 14 0x308>;
+		clock-frequency = <6144000>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
-- 
1.7.9.5