[PATCH 0/3 v3] ARM: shmobile: add R8A7778 Bock-W board support v3

[Kuninori Morimoto]

Hi Simon, Magnus, Arnd

These are v3 patch set of R8A7778 R-Car M1 SoC/board support
This SoC/board support have limited DT only.
(TMU/SCIF can't use DT at this point)

I will work for external IRQ and SMSC support
if these are accepted.

These patches are based on simon/next branch

Kuninori Morimoto (3):
      ARM: shmobile: add R8A7778 basis support
      ARM: shmobile: r8a7778 SCIF support
      ARM: shmobile: add R-Car M1A Bock-W platform support

 arch/arm/boot/dts/Makefile                    |    1 +
 arch/arm/boot/dts/r8a7778-bockw.dts           |   32 ++++
 arch/arm/boot/dts/r8a7778.dtsi                |   35 +++++
 arch/arm/configs/bockw_defconfig              |   66 +++++++++
 arch/arm/mach-shmobile/Kconfig                |   12 ++
 arch/arm/mach-shmobile/Makefile               |    2 +
 arch/arm/mach-shmobile/board-bockw.c          |   43 ++++++
 arch/arm/mach-shmobile/clock-r8a7778.c        |  104 +++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   28 ++++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  193 +++++++++++++++++++++++++
 10 files changed, 516 insertions(+)

This is my command for DT uImage

PC> make bockw_defconfig
PC> make menuconfig
PC> make zImage
PC> make dtbs
PC> duImage r8a7778-bockw-reference
PC> cp arch/sh/boot/duImage ${PATH}

---- duImage --------------------------------
#! /bin/sh

# create zImage + dtb = dzImage
cat arch/arm/boot/zImage arch/arm/boot/dts/${1}.dtb > arch/arm/boot/dzImage

# create duImage
DUIMAGE=`cut -f 3- -d ' ' < arch/arm/boot/.uImage.cmd | sed -e "s/zImage/dzImage/" | sed -e "s/uImage/duImage/"`
${DUIMAGE}%
----------------------------------------------

Best regards
---
Kuninori Morimoto