[PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions

Rob Herring robherring2 at gmail.com
Mon Mar 18 11:54:03 EDT 2013


On 03/17/2013 08:09 AM, Heiko Stübner wrote:
> The s3c2450 is special in that it shares the cpu identification with the
> s3c2416 but provides more interrupts for its additional components.
> 
> It also shares the layout of the main interrupt register with the s3c2443
> and therefore reuses this definition.
> 
> As no non-dt boards are present, the s3c2450 irqs will only be
> accessible thru devicetree.
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  drivers/irqchip/irq-s3c24xx.c |   62 +++++++++++++++++++++++++++++++++++++++-
>  1 files changed, 60 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
> index 55cb363..7ddf8e8 100644
> --- a/drivers/irqchip/irq-s3c24xx.c
> +++ b/drivers/irqchip/irq-s3c24xx.c
> @@ -852,6 +852,51 @@ static struct s3c_irq_data init_s3c2416_second[32] = {
>  	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
>  };
>  
> +static struct s3c_irq_data init_s3c2450subint[32] = {
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
> +	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
> +	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
> +	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
> +	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA6 */
> +	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA7 */

This all seems like information that should come from DT.

> +};
> +
> +static struct s3c_irq_data init_s3c2450second[32] = {
> +	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
> +	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
> +	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
> +	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
> +	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
> +	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
> +	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
> +	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
> +};
> +
>  void __init s3c2416_init_irq(void)
>  {
>  	struct s3c_irq_intc *main_intc;
> @@ -1024,7 +1069,7 @@ void __init s3c2442_init_irq(void)
>  }
>  #endif
>  
> -#ifdef CONFIG_CPU_S3C2443
> +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
>  static struct s3c_irq_data init_s3c2443base[32] = {
>  	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
>  	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
> @@ -1059,8 +1104,9 @@ static struct s3c_irq_data init_s3c2443base[32] = {
>  	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
>  	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
>  };
> +#endif
>  
> -
> +#ifdef CONFIG_CPU_S3C2443
>  static struct s3c_irq_data init_s3c2443subint[32] = {
>  	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
>  	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
> @@ -1172,6 +1218,17 @@ struct s3c24xx_irq_of_data s3c2416_irq_data = {
>  	.irq_ctrl = s3c2416_ctrl,
>  	.num_ctrl = ARRAY_SIZE(s3c2416_ctrl),
>  };
> +
> +static struct s3c24xx_irq_of_ctrl s3c2450_ctrl[] = {
> +	S3C24XX_IRQCTRL("intc", 0, init_s3c2443base, &main_intc, NULL),
> +	S3C24XX_IRQCTRL("subintc", 0x18, init_s3c2450subint, NULL, &main_intc),
> +	S3C24XX_IRQCTRL("intc2", 0x40, init_s3c2450second, &main_intc2, NULL),
> +};
> +
> +static struct s3c24xx_irq_of_data s3c2450_irq_data = {
> +	.irq_ctrl = s3c2450_ctrl,
> +	.num_ctrl = ARRAY_SIZE(s3c2450_ctrl),
> +};
>  #endif
>  
>  #ifdef CONFIG_CPU_S3C2440
> @@ -1219,6 +1276,7 @@ static const struct of_device_id intc_list[] = {
>  #endif
>  #ifdef CONFIG_CPU_S3C2416
>  	{ .compatible = "samsung,s3c2416-irq", .data = &s3c2416_irq_data },
> +	{ .compatible = "samsung,s3c2450-irq", .data = &s3c2450_irq_data },

Why are you not using IRQCHIP_OF_DECLARE?

Rob




More information about the linux-arm-kernel mailing list