[PATCH v2 1/3] ARM: davinci: clk framework support for enable/disable functionality

[Sekhar Nori]

On 3/20/2013 12:11 PM, Philip Avinash wrote:
> DAVINCI clock framework currently not supporting clock enable/disable
> functionality on clock nodes. In DAVINCI platform EHRPWM module requires

Wrong. clock enable/disable is supported in the DaVinci clock
implementation, but just for PSC clocks.

> support for clock enable/disable for TBCLK support. Hence this patch
> adds support for enabling/disabling clocks depends on the availability
> of the functionality.
> 
> Signed-off-by: Philip Avinash <avinashphilip at ti.com>
> ---
> Changes since v1:
> 	- Add support for clock enable/disable functionality.
> 
> :100644 100644 d458558... aa89e5e... M	arch/arm/mach-davinci/clock.c
> :100644 100644 8694b39... 1e4e836... M	arch/arm/mach-davinci/clock.h
>  arch/arm/mach-davinci/clock.c |    4 ++++
>  arch/arm/mach-davinci/clock.h |    2 ++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
> index d458558..aa89e5e 100644
> --- a/arch/arm/mach-davinci/clock.c
> +++ b/arch/arm/mach-davinci/clock.c
> @@ -35,6 +35,8 @@ static void __clk_enable(struct clk *clk)
>  {
>  	if (clk->parent)
>  		__clk_enable(clk->parent);
> +	if (clk->clk_enable)
> +		clk->clk_enable(clk);

Why ignore usecount in this case?

>  	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))

if clk->enable is available, no need to check for 'clk->flags & CLK_PSC'

Thanks,
Sekhar