[PATCH v2 2/4] net: freescale: fec: add support for optional enet_out clk
Shawn Guo
shawn.guo at linaro.org
Mon Mar 18 04:26:23 EDT 2013
From: Wolfram Sang <w.sang at pengutronix.de>
Some MX28 boards need the internal enet_out clock to be enabled. So, do
this in the driver iff the clock was referenced via devicetree.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
drivers/net/ethernet/freescale/fec.c | 10 ++++++++++
drivers/net/ethernet/freescale/fec.h | 1 +
2 files changed, 11 insertions(+)
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index d2a9851..2297283 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1800,6 +1800,11 @@ fec_probe(struct platform_device *pdev)
goto failed_clk;
}
+ /* enet_out is optional, depends on board */
+ fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
+ if (IS_ERR(fep->clk_enet_out))
+ fep->clk_enet_out = NULL;
+
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
fep->bufdesc_ex =
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
@@ -1810,6 +1815,7 @@ fec_probe(struct platform_device *pdev)
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
+ clk_prepare_enable(fep->clk_enet_out);
clk_prepare_enable(fep->clk_ptp);
reg_phy = devm_regulator_get(&pdev->dev, "phy");
@@ -1875,6 +1881,7 @@ failed_irq:
failed_regulator:
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
+ clk_disable_unprepare(fep->clk_enet_out);
clk_disable_unprepare(fep->clk_ptp);
failed_pin:
failed_clk:
@@ -1901,6 +1908,7 @@ fec_drv_remove(struct platform_device *pdev)
clk_disable_unprepare(fep->clk_ptp);
if (fep->ptp_clock)
ptp_clock_unregister(fep->ptp_clock);
+ clk_disable_unprepare(fep->clk_enet_out);
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1931,6 +1939,7 @@ fec_suspend(struct device *dev)
fec_stop(ndev);
netif_device_detach(ndev);
}
+ clk_disable_unprepare(fep->clk_enet_out);
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
@@ -1943,6 +1952,7 @@ fec_resume(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
+ clk_prepare_enable(fep->clk_enet_out);
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
if (netif_running(ndev)) {
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 01579b8..becb7bd 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -208,6 +208,7 @@ struct fec_enet_private {
struct clk *clk_ipg;
struct clk *clk_ahb;
+ struct clk *clk_enet_out;
struct clk *clk_ptp;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
--
1.7.9.5
More information about the linux-arm-kernel
mailing list