[PATCH v4 3/5] irqchip: s3c24xx: fix irqlist of second s3c2416 controller

[Heiko Stübner]

The list in used was from the s3c2450, a close cousin of the s3c2416.
As it's not possible to distinguish between the s3c2416 and s3c2450
the additional interrupts of the s3c2450 will only be available thru
devicetree later.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 drivers/irqchip/irq-s3c24xx.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
index 84afbc1..a565eb8 100644
--- a/drivers/irqchip/irq-s3c24xx.c
+++ b/drivers/irqchip/irq-s3c24xx.c
@@ -835,13 +835,12 @@ static struct s3c_irq_data init_s3c2416subint[32] = {
 
 static struct s3c_irq_data init_s3c2416_second[32] = {
 	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
 	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
 	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
 	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
 	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
 };
 
 void __init s3c2416_init_irq(void)
-- 
1.7.2.3