[PATCH 13/16] thermal: mvebu: Add support for Marvell Dove SoC family

Ezequiel Garcia ezequiel.garcia at free-electrons.com
Wed Mar 20 18:36:34 EDT 2013


With the infrastructure added in mvebu-thermal to support multiple SoC
families, it is now possible to add support for Dove SoC.
This patch adds such support taking the implementation from the
dove-thermal driver, and then removing it.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 .../devicetree/bindings/thermal/dove-thermal.txt   |   18 --
 .../devicetree/bindings/thermal/mvebu-thermal.txt  |    8 +
 drivers/thermal/Kconfig                            |    8 -
 drivers/thermal/Makefile                           |    1 -
 drivers/thermal/dove_thermal.c                     |  209 --------------------
 drivers/thermal/mvebu_thermal.c                    |   75 +++++++
 6 files changed, 83 insertions(+), 236 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/dove-thermal.txt
 delete mode 100644 drivers/thermal/dove_thermal.c

diff --git a/Documentation/devicetree/bindings/thermal/dove-thermal.txt b/Documentation/devicetree/bindings/thermal/dove-thermal.txt
deleted file mode 100644
index 6f47467..0000000
--- a/Documentation/devicetree/bindings/thermal/dove-thermal.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Dove Thermal
-
-This driver is for Dove SoCs which contain a thermal sensor.
-
-Required properties:
-- compatible : "marvell,dove-thermal"
-- reg : Address range of the thermal registers
-
-The reg properties should contain two ranges. The first is for the
-three Thermal Manager registers, while the second range contains the
-Thermal Diode Control Registers.
-
-Example:
-
-	thermal at 10078 {
-		compatible = "marvell,dove-thermal";
-		reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt b/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
index 49d55a9..2c5297a 100644
--- a/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
@@ -6,6 +6,7 @@ Required properties:
 		marvell,kirkwood-thermal
 		marvell,armadaxp-thermal
 		marvell,armada370-thermal
+		marvell,dove-thermal
 
 - reg:		Device's register space.
 		One or two entries are expected, see the examples below.
@@ -21,3 +22,10 @@ Kirkwood example:
 		compatible = "marvell,kirkwood-thermal";
 		reg = <0x10078 0x4>;
 	};
+
+Dove example:
+
+	thermal: thermal at d001c {
+		compatible = "marvell,dove-thermal";
+		reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+	};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 74f6b97..237c3e6 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -126,14 +126,6 @@ config EXYNOS_THERMAL_EMUL
 	  device directory to support emulation mode. With emulation mode sysfs
 	  node, you can manually input temperature to TMU for simulation purpose.
 
-config DOVE_THERMAL
-	tristate "Temperature sensor on Marvell Dove SoCs"
-	depends on ARCH_DOVE
-	depends on OF
-	help
-	  Support for the Dove thermal sensor driver in the Linux thermal
-	  framework.
-
 config DB8500_THERMAL
 	bool "DB8500 thermal management"
 	depends on ARCH_U8500
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 40293a1..ddd77f4 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_MVEBU_THERMAL)	+= mvebu_thermal.o
 obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
-obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
deleted file mode 100644
index 7b0bfa0..0000000
--- a/drivers/thermal/dove_thermal.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Dove thermal sensor driver
- *
- * Copyright (C) 2013 Andrew Lunn <andrew at lunn.ch>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/thermal.h>
-
-#define DOVE_THERMAL_TEMP_OFFSET	1
-#define DOVE_THERMAL_TEMP_MASK		0x1FF
-
-/* Dove Thermal Manager Control and Status Register */
-#define PMU_TM_DISABLE_OFFS		0
-#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
-
-/* Dove Theraml Diode Control 0 Register */
-#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
-#define PMU_TDC0_SEL_VCAL_OFFS		5
-#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
-#define PMU_TDC0_REF_CAL_CNT_OFFS	11
-#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
-#define PMU_TDC0_AVG_NUM_OFFS		25
-#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
-
-/* Dove Thermal Diode Control 1 Register */
-#define PMU_TEMP_DIOD_CTRL1_REG		0x04
-#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
-
-/* Dove Thermal Sensor Dev Structure */
-struct dove_thermal_priv {
-	void __iomem *sensor;
-	void __iomem *control;
-};
-
-static int dove_init_sensor(const struct dove_thermal_priv *priv)
-{
-	u32 reg;
-	u32 i;
-
-	/* Configure the Diode Control Register #0 */
-	reg = readl_relaxed(priv->control);
-
-	/* Use average of 2 */
-	reg &= ~PMU_TDC0_AVG_NUM_MASK;
-	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
-
-	/* Reference calibration value */
-	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
-	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
-
-	/* Set the high level reference for calibration */
-	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
-	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
-	writel(reg, priv->control);
-
-	/* Reset the sensor */
-	reg = readl_relaxed(priv->control);
-	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
-	writel(reg, priv->control);
-
-	/* Enable the sensor */
-	reg = readl_relaxed(priv->sensor);
-	reg &= ~PMU_TM_DISABLE_MASK;
-	writel(reg, priv->sensor);
-
-	/* Poll the sensor for the first reading */
-	for (i = 0; i < 1000000; i++) {
-		reg = readl_relaxed(priv->sensor);
-		if (reg & DOVE_THERMAL_TEMP_MASK)
-			break;
-	}
-
-	if (i == 1000000)
-		return -EIO;
-
-	return 0;
-}
-
-static int dove_get_temp(struct thermal_zone_device *thermal,
-			  unsigned long *temp)
-{
-	unsigned long reg;
-	struct dove_thermal_priv *priv = thermal->devdata;
-
-	/* Valid check */
-	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
-	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) {
-		dev_err(&thermal->device,
-			"Temperature sensor reading not valid\n");
-		return -EIO;
-	}
-
-	/*
-	 * Calculate temperature. See Section 8.10.1 of 88AP510,
-	 * Documentation/arm/Marvell/README
-	 */
-	reg = readl_relaxed(priv->sensor);
-	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
-	*temp = ((2281638UL - (7298*reg)) / 10);
-
-	return 0;
-}
-
-static struct thermal_zone_device_ops ops = {
-	.get_temp = dove_get_temp,
-};
-
-static const struct of_device_id dove_thermal_id_table[] = {
-	{ .compatible = "marvell,dove-thermal" },
-	{}
-};
-
-static int dove_thermal_probe(struct platform_device *pdev)
-{
-	struct thermal_zone_device *thermal = NULL;
-	struct dove_thermal_priv *priv;
-	struct resource *res;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		return -ENODEV;
-	}
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
-	if (!priv->sensor) {
-		dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
-		return -EADDRNOTAVAIL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		return -ENODEV;
-	}
-	priv->control = devm_request_and_ioremap(&pdev->dev, res);
-	if (!priv->control) {
-		dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
-		return -EADDRNOTAVAIL;
-	}
-
-	ret = dove_init_sensor(priv);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize sensor\n");
-		return ret;
-	}
-
-	thermal = thermal_zone_device_register("dove_thermal", 0, 0,
-					       priv, &ops, NULL, 0, 0);
-	if (IS_ERR(thermal)) {
-		dev_err(&pdev->dev,
-			"Failed to register thermal zone device\n");
-		return PTR_ERR(thermal);
-	}
-
-	platform_set_drvdata(pdev, thermal);
-
-	return 0;
-}
-
-static int dove_thermal_exit(struct platform_device *pdev)
-{
-	struct thermal_zone_device *dove_thermal =
-		platform_get_drvdata(pdev);
-
-	thermal_zone_device_unregister(dove_thermal);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
-
-static struct platform_driver dove_thermal_driver = {
-	.probe = dove_thermal_probe,
-	.remove = dove_thermal_exit,
-	.driver = {
-		.name = "dove_thermal",
-		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(dove_thermal_id_table),
-	},
-};
-
-module_platform_driver(dove_thermal_driver);
-
-MODULE_AUTHOR("Andrew Lunn <andrew at lunn.ch>");
-MODULE_DESCRIPTION("Dove thermal driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/mvebu_thermal.c b/drivers/thermal/mvebu_thermal.c
index 0b1e7a8..fbb0612 100644
--- a/drivers/thermal/mvebu_thermal.c
+++ b/drivers/thermal/mvebu_thermal.c
@@ -2,6 +2,7 @@
  * Marvell EBU thermal sensor driver
  *
  * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013 Andrew Lunn <andrew at lunn.ch>
  * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -28,6 +29,7 @@
 #define MVEBU_THERMAL_SOC_VARIANT_KIRKWOOD    0x1
 #define MVEBU_THERMAL_SOC_VARIANT_ARMADA_XP   0x2
 #define MVEBU_THERMAL_SOC_VARIANT_ARMADA_370  0x3
+#define MVEBU_THERMAL_SOC_VARIANT_DOVE        0x4
 
 #define MVEBU_THERMAL_VALID_OFFSET	9
 #define MVEBU_THERMAL_VALID_MASK	0x1
@@ -42,6 +44,14 @@
 #define PMU_TDC0_REF_CAL_CNT_MASK	(0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
 #define PMU_TDC0_OTF_CAL_MASK		(0x1 << 30)
 #define PMU_TDC0_START_CAL_MASK		(0x1 << 25)
+#define PMU_TDC0_AVG_NUM_OFFS		25
+#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
+#define PMU_TDC0_SEL_VCAL_OFFS		5
+#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
+
+/* Dove Thermal Diode Control 1 Register */
+#define PMU_TEMP_DIOD_CTRL1_REG		0x04
+#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
 
 /* Marvell EBU Thermal Sensor Dev Structure */
 struct mvebu_thermal_priv {
@@ -110,6 +120,53 @@ static void armada370_init_sensor(struct mvebu_thermal_priv *priv)
 	mdelay(10);
 }
 
+static void dove_init_sensor(struct mvebu_thermal_priv *priv)
+{
+	unsigned long reg;
+	int i;
+
+	if (!priv->control)
+		return;
+
+	/* Configure the Diode Control Register #0 */
+	reg = readl_relaxed(priv->control);
+
+	/* Use average of 2 */
+	reg &= ~PMU_TDC0_AVG_NUM_MASK;
+	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
+
+	/* Reference calibration value */
+	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+
+	/* Set the high level reference for calibration */
+	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
+	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
+	writel(reg, priv->control);
+
+	/* Reset the sensor */
+	reg = readl_relaxed(priv->control);
+	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
+	writel(reg, priv->control);
+
+	/* Enable the sensor */
+	reg = readl_relaxed(priv->sensor);
+	reg &= ~PMU_TM_DISABLE_MASK;
+	writel(reg, priv->sensor);
+
+	/*
+	 * FIXME: This looks really ugly. Can't we just remove it?
+	 * Poll the sensor for the first reading
+	 */
+	for (i = 0; i < 1000000; i++) {
+		reg = (readl_relaxed(priv->sensor) >> MVEBU_THERMAL_TEMP_OFFSET)
+			& MVEBU_THERMAL_TEMP_MASK;
+		if (reg)
+			break;
+	}
+	return;
+}
+
 static bool mvebu_is_valid(struct mvebu_thermal_priv *priv)
 {
 	unsigned long reg = readl_relaxed(priv->sensor);
@@ -118,6 +175,13 @@ static bool mvebu_is_valid(struct mvebu_thermal_priv *priv)
 		MVEBU_THERMAL_VALID_MASK;
 }
 
+static bool dove_is_valid(struct mvebu_thermal_priv *priv)
+{
+	unsigned long reg =
+		readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
+	return reg & PMU_TDC1_TEMP_VALID_MASK;
+}
+
 static int mvebu_get_temp(struct thermal_zone_device *thermal,
 			  unsigned long *temp)
 {
@@ -144,6 +208,9 @@ static int mvebu_get_temp(struct thermal_zone_device *thermal,
 	case MVEBU_THERMAL_SOC_VARIANT_ARMADA_370:
 		*temp = (228000UL - 723*reg);
 		break;
+	case MVEBU_THERMAL_SOC_VARIANT_DOVE:
+		*temp = ((2281638UL - (7298*reg)) / 10);
+		break;
 	default:
 		*temp = 0;
 		break;
@@ -169,6 +236,10 @@ static const struct of_device_id mvebu_thermal_id_table[] = {
 		.data       = (void *) MVEBU_THERMAL_SOC_VARIANT_ARMADA_370,
 	},
 	{
+		.compatible = "marvell,dove-thermal",
+		.data       = (void *) MVEBU_THERMAL_SOC_VARIANT_DOVE,
+	},
+	{
 		/* sentinel */
 	},
 };
@@ -218,6 +289,9 @@ static int mvebu_thermal_probe(struct platform_device *pdev)
 		priv->is_valid = mvebu_is_valid;
 		priv->init_sensor = armada370_init_sensor;
 		break;
+	case MVEBU_THERMAL_SOC_VARIANT_DOVE:
+		priv->is_valid = dove_is_valid;
+		priv->init_sensor = dove_init_sensor;
 	default:
 		break;
 	}
@@ -261,6 +335,7 @@ static struct platform_driver mvebu_thermal_driver = {
 
 module_platform_driver(mvebu_thermal_driver);
 
+MODULE_AUTHOR("Andrew Lunn <andrew at lunn.ch>");
 MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu at nigauri.org>");
 MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia at free-electrons.com>");
 MODULE_DESCRIPTION("mvebu thermal driver");
-- 
1.7.8.6




More information about the linux-arm-kernel mailing list