[PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code

[Peter Chen]

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   28 +++++-----------------------
 1 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 3ed119e..b2d8350 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -33,7 +33,6 @@ struct ci13xxx_imx_data {
 	struct usb_phy *phy;
 	struct platform_device *ci_pdev;
 	struct clk *clk;
-	struct regulator *reg_vbus;
 };
 
 static const struct usbmisc_ops *usbmisc_ops;
@@ -163,20 +162,9 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		data->phy = phy;
 	}
 
-	/* we only support host now, so enable vbus here */
 	reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
-	if (!IS_ERR(reg_vbus)) {
-		ret = regulator_enable(reg_vbus);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"Failed to enable vbus regulator, err=%d\n",
-				ret);
-			goto err_clk;
-		}
-		data->reg_vbus = reg_vbus;
-	} else {
-		reg_vbus = NULL;
-	}
+	if (!IS_ERR(reg_vbus))
+		pdata->reg_vbus = reg_vbus;
 
 	pdata->phy = data->phy;
 
@@ -186,7 +174,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		if (!pdev->dev.dma_mask) {
 			ret = -ENOMEM;
 			dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
-			goto err;
+			goto err_clk;
 		}
 		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
 		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
@@ -197,7 +185,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev,
 				"usbmisc init failed, ret=%d\n", ret);
-			goto err;
+			goto err_clk;
 		}
 	}
 
@@ -209,7 +197,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Can't register ci_hdrc platform device, err=%d\n",
 			ret);
-		goto err;
+		goto err_clk;
 	}
 
 	data->ci_pdev = plat_ci;
@@ -220,9 +208,6 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	return 0;
 
-err:
-	if (reg_vbus)
-		regulator_disable(reg_vbus);
 err_clk:
 	clk_disable_unprepare(data->clk);
 	return ret;
@@ -235,9 +220,6 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	ci13xxx_remove_device(data->ci_pdev);
 
-	if (data->reg_vbus)
-		regulator_disable(data->reg_vbus);
-
 	if (data->phy) {
 		usb_phy_shutdown(data->phy);
 		module_put(data->phy->dev->driver->owner);
-- 
1.7.0.4