[PATCH 11/46] regulator: ab8500: Remove USB regulator

[Lee Jones]

The USB regulator is controlled by hardware. The software support
was only needed for early hardware (ED) which is no longer supported.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson at stericsson.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/regulator/ab8500.c       |   19 -------------------
 include/linux/regulator/ab8500.h |    1 -
 2 files changed, 20 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 7d4006e..dfe191c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -494,24 +494,6 @@ static struct ab8500_regulator_info
 		.update_val_idle	= 0x82,
 		.update_val_normal	= 0x02,
 	},
-	[AB8500_LDO_USB] = {
-		.desc = {
-			.name           = "LDO-USB",
-			.ops            = &ab8500_regulator_fixed_ops,
-			.type           = REGULATOR_VOLTAGE,
-			.id             = AB8500_LDO_USB,
-			.owner          = THIS_MODULE,
-			.n_voltages     = 1,
-			.min_uV		= 3300000,
-		},
-		.update_bank            = 0x03,
-		.update_reg             = 0x82,
-		.update_mask            = 0x03,
-	},
-
-	/*
-	 * Regulators with fixed voltage and normal mode
-	 */
 	[AB8500_LDO_AUDIO] = {
 		.desc = {
 			.name		= "LDO-AUDIO",
@@ -912,7 +894,6 @@ static struct of_regulator_match ab8500_regulator_matches[] = {
 	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
 	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
 	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
-	{ .name = "ab8500_ldo_usb",     .driver_data = (void *) AB8500_LDO_USB, },
 	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
 	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
 	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 0a58db2..9a2da6a 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -19,7 +19,6 @@ enum ab8500_regulator_id {
 	AB8500_LDO_AUX3,
 	AB8500_LDO_INTCORE,
 	AB8500_LDO_TVOUT,
-	AB8500_LDO_USB,
 	AB8500_LDO_AUDIO,
 	AB8500_LDO_ANAMIC1,
 	AB8500_LDO_ANAMIC2,
-- 
1.7.10.4