[PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT

[Bastian Hecht]

2013/3/5 Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>:
> Hello.
>
>
> On 05-03-2013 17:00, Bastian Hecht wrote:
>
>>>> +       sci at e6c40000 {
>>>> +               compatible = "renesas,sci-SCIFA-uart";
>>>> +               interrupt-parent = <&intca>;
>>>> +               reg = <0xe6c40000 0x100>;
>>>> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
>>>> +               cell-index = <0>;
>>>> +               renesas,scscr = <0x30>;
>>>> +               renesas,scbrr-algo-id = <4>;
>>>> +               renesas,autoconf;
>>>> +       };
>>>
>>>
>>> The default name for a uart is "serial", I would recommend sticking to
>>> that by convention. You may also want to add an "aliases" node
>>> somewhere, to define which port should get which logical device number
>>> on a given board.
>
>
>> Switched to "...-serial".
>
>
>    I think he was talking about the node name, not "compatible" property.

Ah sure! I'll wait for responses to v5 and will change it around in v6.

Thanks,

 Bastian


> WBR, Sergei
>