[PATCH 02/04] ARM: shmobile: r8a7790 SCIF support

Magnus Damm magnus.damm at gmail.com
Wed Mar 20 10:36:24 EDT 2013


From: Magnus Damm <damm at opensource.se>

Add SCIF serial port support to the r8a7790 SoC by
adding platform devices for SCIFA0 -> SCIFA2 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.

Signed-off-by: Magnus Damm <damm at opensource.se>
---

 arch/arm/mach-shmobile/clock-r8a7790.c |   34 +++++++++++++++++++
 arch/arm/mach-shmobile/setup-r8a7790.c |   55 ++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+), 1 deletion(-)

--- 0012/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c	2013-03-20 23:18:42.000000000 +0900
@@ -27,19 +27,51 @@
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR7 0xe615014c
+
 static struct clk_mapping cpg_mapping = {
 	.phys   = CPG_BASE,
 	.len    = CPG_LEN,
 };
 
+static struct clk p_clk = {
+	.rate	= 65000000, /* shortcut for now */
+	.mapping	= &cpg_mapping,
+};
+
+static struct clk mp_clk = {
+	.rate	= 52000000,  /* shortcut for now */
+	.mapping	= &cpg_mapping,
+};
+
 static struct clk *main_clks[] = {
+	&p_clk,
+	&mp_clk,
 };
 
-enum { MSTP_NR };
+enum { MSTP721, MSTP720,
+	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
 };
 
 static struct clk_lookup lookups[] = {
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 };
 
 void __init r8a7790_clock_init(void)
--- 0012/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c	2013-03-20 23:15:07.000000000 +0900
@@ -22,13 +22,68 @@
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/serial_sci.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+
+static const struct plat_sci_port scif[] = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+};
+
+static inline void r8a7790_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
 void __init r8a7790_add_standard_devices(void)
 {
+	r8a7790_register_scif(SCIFA0);
+	r8a7790_register_scif(SCIFA1);
+	r8a7790_register_scif(SCIFB0);
+	r8a7790_register_scif(SCIFB1);
+	r8a7790_register_scif(SCIFB2);
+	r8a7790_register_scif(SCIFA2);
+	r8a7790_register_scif(SCIF0);
+	r8a7790_register_scif(SCIF1);
 }
 
 #ifdef CONFIG_USE_OF



More information about the linux-arm-kernel mailing list