[PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information

[Tony Lindgren]

* Kishon Vijay Abraham I <kishon at ti.com> [130320 02:17]:
> 
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -265,6 +266,7 @@ static void __init omap_2430sdp_init(void)
>  
>  	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
>  	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> +	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
>  	usb_musb_init(NULL);
>  
>  	board_smc91x_init();
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -601,6 +602,7 @@ static void __init omap_3430sdp_init(void)
>  	omap_serial_init();
>  	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
>  	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> +	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
>  	usb_musb_init(NULL);
>  	board_smc91x_init();
>  	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);

Can't you call phy_bind() from usb_musb_init() with the default
values automatically when usb_musb_init() is passed NULL?

That way you don't have to patch every board-*.c file with the
same lines, and don't need to include <linux/phy/phy.h> in each
board-*.c file.

> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -32,6 +32,7 @@
>  #include <linux/platform_data/omap4-keypad.h>
>  #include <linux/usb/musb.h>
>  #include <linux/usb/phy.h>
> +#include <linux/phy/phy.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> @@ -725,6 +726,7 @@ static void __init omap_4430sdp_init(void)
>  	omap4_twl6030_hsmmc_init(mmc);
>  
>  	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> +	phy_bind("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
>  	usb_musb_init(&musb_board_data);
>  
>  	status = omap_ethernet_init();

Here usb_musb_init() gets called with musb_board_data, so
keeping the phy_bind() in the board-4430sdp.c can then override
the default in usb_musb_init().

Regards,

Tony