[PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Wed Mar 20 13:27:02 EDT 2013


Dear Ryan Press,

On Wed, 20 Mar 2013 09:44:42 -0700, Ryan Press wrote:

> I can confirm this patch works for me as well.  I still have the
> problem on my Globalscale Mirabox where only a forced 10Mb link works
> on tx/rx.  With 100Mb only rx works, and 1Gb neither works.

Did you test both network interfaces? Do you have the problem on both?
I know there are issues on the Mirabox with the network interface that
wasn't initialized by U-Boot (i.e if you tftp your kernel from
interface 0, interface 0 works fine in Linux but not interface 1, if
your tftp your kernel from interface 1, it's the opposite).

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list