[PATCH v2 05/11] ARM: dts: OMAP5: Update the timer and gic nodes for HYP kernel support
Santosh Shilimkar
santosh.shilimkar at ti.com
Tue Mar 19 09:30:51 EDT 2013
To be able to run kernel in HYP mode, virtual timer and gic node information
needs to be popullated.
Cc: Benoit Cousson <b-cousson at ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4701244..ff09720 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -46,7 +46,9 @@
compatible = "arm,armv7-timer";
/* PPI secure/nonsecure IRQ, active low level-sensitive */
interrupts = <1 13 0x308>,
- <1 14 0x308>;
+ <1 14 0x308>,
+ <1 11 0x308>,
+ <1 10 0x308>;
clock-frequency = <6144000>;
};
@@ -55,7 +57,9 @@
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48211000 0x1000>,
- <0x48212000 0x1000>;
+ <0x48212000 0x1000>,
+ <0x48214000 0x2000>,
+ <0x48216000 0x2000>;
};
/*
--
1.7.9.5
More information about the linux-arm-kernel
mailing list