[PATCH 1/2] arm: at91: dt: at91sam9x5: add i2c pinctrl

[Nicolas Ferre]

On 03/13/2013 11:07 AM, Ludovic Desroches :
> On Tue, Mar 12, 2013 at 05:54:45PM +0100, Richard Genoud wrote:
>> This adds the at19 i2c controller pin muxes for at91sam9x5 based boards.
>>
>> Signed-off-by: Richard Genoud <richard.genoud at gmail.com>
> 
> Acked-by: Ludovic Desroches <ludovic.desroches at atmel.com>

queued to at91-3.10-dt branch.

Thanks,


>> ---
>>  based on v3.9-rc2
>>
>>  arch/arm/boot/dts/at91sam9x5.dtsi |   30 ++++++++++++++++++++++++++++++
>>  1 files changed, 30 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
>> index aa98e64..8cbcff4 100644
>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>> @@ -319,6 +319,30 @@
>>  					};
>>  				};
>>  
>> +				i2c0 {
>> +					pinctrl_i2c0: i2c0-0 {
>> +						atmel,pins =
>> +							<0 30 0x1 0x0	/* PA30 periph A I2C0 data */
>> +							 0 31 0x1 0x0>;	/* PA31 periph A I2C0 clock */
>> +					};
>> +				};
>> +
>> +				i2c1 {
>> +					pinctrl_i2c1: i2c1-0 {
>> +						atmel,pins =
>> +							<2 0 0x3 0x0	/* PC0 periph C I2C1 data */
>> +							 2 1 0x3 0x0>;	/* PC1 periph C I2C1 clock */
>> +					};
>> +				};
>> +
>> +				i2c2 {
>> +					pinctrl_i2c2: i2c2-0 {
>> +						atmel,pins =
>> +							<1 4 0x2 0x0	/* PB4 periph B I2C2 data */
>> +							 1 5 0x2 0x0>;	/* PB5 periph B I2C2 clock */
>> +					};
>> +				};
>> +
>>  				pioA: gpio at fffff400 {
>>  					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
>>  					reg = <0xfffff400 0x200>;
>> @@ -447,6 +471,8 @@
>>  				interrupts = <9 4 6>;
>>  				#address-cells = <1>;
>>  				#size-cells = <0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_i2c0>;
>>  				status = "disabled";
>>  			};
>>  
>> @@ -456,6 +482,8 @@
>>  				interrupts = <10 4 6>;
>>  				#address-cells = <1>;
>>  				#size-cells = <0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_i2c1>;
>>  				status = "disabled";
>>  			};
>>  
>> @@ -465,6 +493,8 @@
>>  				interrupts = <11 4 6>;
>>  				#address-cells = <1>;
>>  				#size-cells = <0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_i2c2>;
>>  				status = "disabled";
>>  			};
>>  
>> -- 
>> 1.7.2.5
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 


-- 
Nicolas Ferre