[PATCH V3 2/3] clk: Fixup errorhandling for clk_set_parent
Ulf Hansson
ulf.hansson at stericsson.com
Wed Mar 27 05:50:24 EDT 2013
From: Ulf Hansson <ulf.hansson at linaro.org>
Fixup the broken feature of allowing reparent of a clk to the
orhpan list and vice verse. When operating on a single-parent
clk, the .set_parent callback for the clk hw is optional to
implement, but for a multi-parent clk it is mandatory.
Moreover improve the errorhandling by verifying the prerequisites
before triggering clk notifiers. This will prevent unnecessary
rollback with ABORT_RATE_CHANGE.
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat at linaro.org>
---
drivers/clk/clk.c | 56 ++++++++++++++++++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 20 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 97d681b..6fa301b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1269,15 +1269,10 @@ void __clk_reparent(struct clk *clk, struct clk *new_parent)
__clk_recalc_rates(clk, POST_RATE_CHANGE);
}
-static int __clk_set_parent(struct clk *clk, struct clk *parent)
+static u8 clk_fetch_parent_index(struct clk *clk, struct clk *parent)
{
- struct clk *old_parent;
- unsigned long flags;
- int ret = -EINVAL;
u8 i;
- old_parent = clk->parent;
-
if (!clk->parents)
clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
@@ -1297,11 +1292,14 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent)
}
}
- if (i == clk->num_parents) {
- pr_debug("%s: clock %s is not a possible parent of clock %s\n",
- __func__, parent->name, clk->name);
- goto out;
- }
+ return i;
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+ unsigned long flags;
+ int ret = 0;
+ struct clk *old_parent = clk->parent;
/* migrate prepare and enable */
if (clk->prepare_count)
@@ -1314,7 +1312,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent)
spin_unlock_irqrestore(&enable_lock, flags);
/* change clock input source */
- ret = clk->ops->set_parent(clk->hw, i);
+ if (parent && clk->ops->set_parent)
+ ret = clk->ops->set_parent(clk->hw, p_index);
/* clean up old prepare and enable */
spin_lock_irqsave(&enable_lock, flags);
@@ -1325,7 +1324,6 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent)
if (clk->prepare_count)
__clk_unprepare(old_parent);
-out:
return ret;
}
@@ -1344,11 +1342,14 @@ out:
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = 0;
+ u8 p_index = 0;
+ unsigned long p_rate = 0;
if (!clk || !clk->ops)
return -EINVAL;
- if (!clk->ops->set_parent)
+ /* verify ops for for multi-parent clks */
+ if ((clk->num_parents > 1) && (!clk->ops->set_parent))
return -ENOSYS;
/* prevent racing with updates to the clock topology */
@@ -1357,19 +1358,34 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
if (clk->parent == parent)
goto out;
+ /* check that we are allowed to re-parent if the clock is in use */
+ if ((clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* try finding the new parent index */
+ if (parent) {
+ p_index = clk_fetch_parent_index(clk, parent);
+ p_rate = parent->rate;
+ if (p_index == clk->num_parents) {
+ pr_debug("%s: clk %s can not be parent of clk %s\n",
+ __func__, parent->name, clk->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
/* propagate PRE_RATE_CHANGE notifications */
if (clk->notifier_count)
- ret = __clk_speculate_rates(clk, parent->rate);
+ ret = __clk_speculate_rates(clk, p_rate);
/* abort if a driver objects */
if (ret == NOTIFY_STOP)
goto out;
- /* only re-parent if the clock is not in use */
- if ((clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count)
- ret = -EBUSY;
- else
- ret = __clk_set_parent(clk, parent);
+ /* do the re-parent */
+ ret = __clk_set_parent(clk, parent, p_index);
/* propagate ABORT_RATE_CHANGE if .set_parent failed */
if (ret) {
--
1.7.10
More information about the linux-arm-kernel
mailing list