[PATCH V2 3/6] usb: ehci: mv_ehci: remove unused clock
Chao Xie
chao.xie at marvell.com
Mon Mar 25 03:06:54 EDT 2013
The origianl understanding of clock is wrong. The EHCI controller
only have one clock input.
Passing clock name by pdata is wrong. The clock is defined by device
iteself.
Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
drivers/usb/host/ehci-mv.c | 35 ++++++++++-------------------------
1 files changed, 10 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 3804820..6bad41a 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -33,25 +33,17 @@ struct ehci_hcd_mv {
struct mv_usb_platform_data *pdata;
- /* clock source and total clock number */
- unsigned int clknum;
- struct clk *clk[0];
+ struct clk *clk;
};
static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
{
- unsigned int i;
-
- for (i = 0; i < ehci_mv->clknum; i++)
- clk_prepare_enable(ehci_mv->clk[i]);
+ clk_prepare_enable(ehci_mv->clk);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
{
- unsigned int i;
-
- for (i = 0; i < ehci_mv->clknum; i++)
- clk_disable_unprepare(ehci_mv->clk[i]);
+ clk_disable_unprepare(ehci_mv->clk);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
@@ -144,9 +136,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
struct ehci_hcd *ehci;
struct ehci_hcd_mv *ehci_mv;
struct resource *r;
- int clk_i, retval = -ENODEV;
+ int retval = -ENODEV;
u32 offset;
- size_t size;
if (!pdata) {
dev_err(&pdev->dev, "missing platform_data\n");
@@ -160,8 +151,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
- size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
- ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL);
if (ehci_mv == NULL) {
dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
retval = -ENOMEM;
@@ -172,16 +162,11 @@ static int mv_ehci_probe(struct platform_device *pdev)
ehci_mv->pdata = pdata;
ehci_mv->hcd = hcd;
- ehci_mv->clknum = pdata->clknum;
- for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
- ehci_mv->clk[clk_i] =
- devm_clk_get(&pdev->dev, pdata->clkname[clk_i]);
- if (IS_ERR(ehci_mv->clk[clk_i])) {
- dev_err(&pdev->dev, "error get clck \"%s\"\n",
- pdata->clkname[clk_i]);
- retval = PTR_ERR(ehci_mv->clk[clk_i]);
- goto err_clear_drvdata;
- }
+ ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ehci_mv->clk)) {
+ dev_err(&pdev->dev, "error getting clock\n");
+ retval = PTR_ERR(ehci_mv->clk);
+ goto err_clear_drvdata;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
--
1.7.4.1
More information about the linux-arm-kernel
mailing list