[PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT

Bastian Hecht hechtb at gmail.com
Tue Mar 5 08:00:41 EST 2013


Hi Arnd,

2013/3/4 Arnd Bergmann <arnd at arndb.de>:
> On Monday 04 March 2013 17:20:54 Bastian Hecht wrote:
>>
>> +       sci at e6c40000 {
>> +               compatible = "renesas,sci-SCIFA-uart";
>> +               interrupt-parent = <&intca>;
>> +               reg = <0xe6c40000 0x100>;
>> +               interrupts = <0x0c00>, <0x0c00>, <0x0c00>, <0x0c00>;
>> +               cell-index = <0>;
>> +               renesas,scscr = <0x30>;
>> +               renesas,scbrr-algo-id = <4>;
>> +               renesas,autoconf;
>> +       };
>
> The default name for a uart is "serial", I would recommend sticking to
> that by convention. You may also want to add an "aliases" node
> somewhere, to define which port should get which logical device number
> on a given board.

Switched to "...-serial".
About the aliases: Would I need to add that now, or can we postpone that?

Thanks,

 Bastian


>         Arnd



More information about the linux-arm-kernel mailing list