[PATCH 3/6] arm: sunxi: use the right clock phandles for UARTs
Emilio López
emilio at elopez.com.ar
Fri Mar 22 10:20:39 EDT 2013
All the UARTs are connected to clock gates; now that our clock driver
is able to handle them, make the switch.
Signed-off-by: Emilio López <emilio at elopez.com.ar>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 12 ++++++------
arch/arm/boot/dts/sunxi.dtsi | 4 ++--
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 68a27fc..6b3a6b2 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -54,7 +54,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 16>;
status = "disabled";
};
@@ -64,7 +64,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 18>;
status = "disabled";
};
@@ -74,7 +74,7 @@
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 20>;
status = "disabled";
};
@@ -84,7 +84,7 @@
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 21>;
status = "disabled";
};
@@ -94,7 +94,7 @@
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 22>;
status = "disabled";
};
@@ -104,7 +104,7 @@
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 23>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 22f0d9d..27a4fe2 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -191,7 +191,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 17>;
status = "disabled";
};
@@ -201,7 +201,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc>;
+ clocks = <&apb1_gates 19>;
status = "disabled";
};
};
--
1.8.2
More information about the linux-arm-kernel
mailing list