[PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree

Lee Jones lee.jones at linaro.org
Mon Mar 25 12:46:00 EDT 2013


> >         res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> >                                            "prcmu-tcpm");
> >         if (!res) {
> > -               dev_err(&pdev->dev,
> > -                       "Error: no prcmu tcpm memory region provided\n");
> > -               return;
> > -       }
> > -       tcpm_base = ioremap(res->start, resource_size(res));
> > +               if (np) {
> > +                       tcpm_np = of_find_node_by_name(np->parent,
> > +                                                      "prcmu-tcpm-per4");
> > +                       if (!tcpm_np) {
> > +                               dev_err(&pdev->dev,
> > +                                       "no prcmu tcpm mem region provided\n");
> > +                               return;
> > +                       }
> > +                       tcpm_base = of_iomap(tcpm_np, 0);
> > +               }
> > +       } else
> > +               tcpm_base = ioremap(res->start, resource_size(res));
> > +
> 
> Why don't you just add these extra registers to the prcmu node itself like
> 
> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> index 9de9309..6ee6c31 100644
> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> @@ -191,8 +191,8 @@
>  
>  		prcmu: prcmu at 80157000 {
>  			compatible = "stericsson,db8500-prcmu";
> -			reg = <0x80157000 0x1000>;
> -			reg-names = "prcmu";
> +			reg = <0x80157000 0x1000>, <0x801b0000 0x1000>, <0x801b8000 0x1000>;
> +			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm-per4";
>  			interrupts = <0 47 0x4>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> 
> 
> and document those in the prcmu binding?
> 
> That would keep the code simpler and the same for both cases.

I'm not sure you can. These addresses differ from platform to
platform, so I'd need to provide the base PRCMU address in
dbx5x0.dtsi, then the other two in the dts files. Can you do that?

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list