[PATCH 2/2] ARM: dts: add pin state information in client nodes for Exynos5 platforms
Thomas Abraham
thomas.abraham at linaro.org
Wed Mar 6 07:36:38 EST 2013
Add default pin state information for all client nodes that require
pin configuration support using pinctrl interface.
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
arch/arm/boot/dts/cros5250-common.dtsi | 51 +--
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 783 +++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 33 +-
arch/arm/boot/dts/exynos5250-snow.dts | 22 +-
arch/arm/boot/dts/exynos5250.dtsi | 310 +++---------
5 files changed, 889 insertions(+), 310 deletions(-)
create mode 100755 arch/arm/boot/dts/exynos5250-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 46c0980..e782706 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -19,31 +19,30 @@
chosen {
};
+ pinctrl at 11400000 {
+ /*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+ i2c2_bus: i2c2-bus {
+ samsung,pin-pud = <0>;
+ };
+ };
+
i2c at 12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- gpios = <&gpb3 0 2 3 0>,
- <&gpb3 1 2 3 0>;
};
i2c at 12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- gpios = <&gpb3 2 2 3 0>,
- <&gpb3 3 2 3 0>;
};
i2c at 12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- gpios = <&gpa0 6 3 0 0>,
- <&gpa0 7 3 0 0>;
-
hdmiddc at 50 {
compatible = "samsung,exynos5-hdmiddc";
reg = <0x50>;
@@ -53,8 +52,6 @@
i2c at 12C90000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa1 2 3 3 0>,
- <&gpa1 3 3 3 0>;
};
i2c at 12CA0000 {
@@ -64,8 +61,6 @@
i2c at 12CB0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa2 2 3 3 0>,
- <&gpa2 3 3 3 0>;
};
i2c at 12CC0000 {
@@ -75,8 +70,6 @@
i2c at 12CD0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpb2 2 3 3 0>,
- <&gpb2 3 3 3 0>;
};
i2c at 12CE0000 {
@@ -98,15 +91,12 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot at 0 {
reg = <0>;
bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
@@ -122,15 +112,13 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot at 0 {
reg = <0>;
bus-width = <4>;
- samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
- wp-gpios = <&gpc2 1 0 0 3>;
- gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
- <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
- <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ wp-gpios = <&gpc2 1 0>;
};
};
@@ -143,11 +131,11 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ /* See board-specific dts files for pin setup */
slot at 0 {
reg = <0>;
bus-width = <4>;
- /* See board-specific dts files for GPIOs */
};
};
@@ -156,9 +144,6 @@
};
spi_1: spi at 12d30000 {
- gpios = <&gpa2 4 2 3 0>,
- <&gpa2 6 2 3 0>,
- <&gpa2 7 2 3 0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
@@ -168,7 +153,7 @@
};
hdmi {
- hpd-gpio = <&gpx3 7 0xf 1 3>;
+ hpd-gpio = <&gpx3 7 0>;
};
gpio-keys {
@@ -176,7 +161,7 @@
power {
label = "Power";
- gpios = <&gpx1 3 0 0x10000 0>;
+ gpios = <&gpx1 3 1>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
new file mode 100755
index 0000000..d1650fb
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -0,0 +1,783 @@
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl at 11400000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpc4: gpc4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+ <26 0>, <26 1>, <27 0>, <27 1>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+ <30 0>, <30 1>, <31 0>, <31 1>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c2_hs_bus: i2c2-hs-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c3_hs_bus: i2c3-hs-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpa2-0", "gpa2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpa2-2", "gpa2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpb1-0", "gpb1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpb1-3", "gpb1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpb2-2", "gpb2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_hs_bus: i2c0-hs-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c1_hs_bus: i2c1-hs-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpc4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpc4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpc4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpc4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl at 13400000 {
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph0: gph0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cam_gpio_a: cam-gpio-a {
+ samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+ "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+ "gpe1-0", "gpe1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_b: cam-gpio-b {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c2_bus: cam-i2c2-bus {
+ samsung,pins = "gpe0-6", "gpe1-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_spi1_bus: cam-spi1-bus {
+ samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c1_bus: cam-i2c1-bus {
+ samsung,pins = "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c0_bus: cam-i2c0-bus {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_spi0_bus: cam-spi0-bus {
+ samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_bayrgb_bus: cam-bayrgb-bus {
+ samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+ "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+ "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+ "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+ "gpg2-0", "gpg2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_port_a: cam-port-a {
+ samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+ "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+ "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl at 10d10000 {
+ gpv0: gpv0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv1: gpv1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv2: gpv2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv3: gpv3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv4: gpv4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ c2c_rxd: c2c-rxd {
+ samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+ "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+ "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ c2c_txd: c2c-txd {
+ samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+ "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+ "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl at 03680000 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1b8d410..ef35f3f 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -30,8 +30,6 @@
i2c at 12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
- gpios = <&gpb3 0 2 3 0>,
- <&gpb3 1 2 3 0>;
eeprom at 50 {
compatible = "samsung,s524ad0xd1";
@@ -42,8 +40,6 @@
i2c at 12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
- gpios = <&gpb3 2 2 3 0>,
- <&gpb3 3 2 3 0>;
eeprom at 51 {
compatible = "samsung,s524ad0xd1";
@@ -74,8 +70,6 @@
i2c at 12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa0 6 3 3 0>,
- <&gpa0 7 3 3 0>;
hdmiddc at 50 {
compatible = "samsung,exynos5-hdmiddc";
@@ -122,15 +116,12 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot at 0 {
reg = <0>;
bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
@@ -146,17 +137,13 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot at 0 {
reg = <0>;
bus-width = <4>;
- samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
disable-wp;
- gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
- <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
- <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
- <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
- <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
};
};
@@ -169,10 +156,6 @@
};
spi_1: spi at 12d30000 {
- gpios = <&gpa2 4 2 3 0>,
- <&gpa2 6 2 3 0>,
- <&gpa2 7 2 3 0>;
-
w25q80bw at 0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -181,7 +164,7 @@
spi-max-frequency = <1000000>;
controller-data {
- cs-gpio = <&gpa2 5 1 0 3>;
+ cs-gpio = <&gpa2 5 0>;
samsung,spi-feedback-delay = <0>;
};
@@ -203,7 +186,7 @@
};
hdmi {
- hpd-gpio = <&gpx3 7 0xf 1 3>;
+ hpd-gpio = <&gpx3 7 0>;
};
codec at 11000000 {
@@ -212,9 +195,7 @@
};
i2s0: i2s at 03830000 {
- gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
- <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
- <&gpz 6 2 0 0>;
+ status = "okay";
};
i2s1: i2s at 12D60000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 17dd951..434e440 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -16,12 +16,27 @@
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250";
+ pinctrl at 11400000 {
+ sd3_clk: sd3-clk {
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pin-drv = <0>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 0 0x10000 0>;
+ gpios = <&gpx3 5 1>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -35,9 +50,8 @@
*/
dwmmc3 at 12230000 {
slot at 0 {
- gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
- <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
- <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b1ac73e..0ea9c70 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -18,6 +18,7 @@
*/
/include/ "skeleton.dtsi"
+/include/ "exynos5250-pinctrl.dtsi"
/ {
compatible = "samsung,exynos5250";
@@ -44,6 +45,10 @@
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ pinctrl3 = &pinctrl_3;
};
gic:interrupt-controller at 10481000 {
@@ -69,6 +74,36 @@
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ pinctrl_0: pinctrl at 11400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 46 0>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
+
+ pinctrl_1: pinctrl at 13400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x13400000 0x1000>;
+ interrupts = <0 45 0>;
+ };
+
+ pinctrl_2: pinctrl at 10d10000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x10d10000 0x1000>;
+ interrupts = <0 50 0>;
+ };
+
+ pinctrl_3: pinctrl at 03680000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x0368000 0x1000>;
+ interrupts = <0 47 0>;
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
@@ -134,6 +169,8 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
};
i2c_1: i2c at 12C70000 {
@@ -142,6 +179,8 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
};
i2c_2: i2c at 12C80000 {
@@ -150,6 +189,8 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
};
i2c_3: i2c at 12C90000 {
@@ -158,6 +199,8 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
};
i2c_4: i2c at 12CA0000 {
@@ -166,6 +209,8 @@
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
};
i2c_5: i2c at 12CB0000 {
@@ -174,6 +219,8 @@
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
};
i2c_6: i2c at 12CC0000 {
@@ -182,6 +229,8 @@
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
};
i2c_7: i2c at 12CD0000 {
@@ -190,6 +239,8 @@
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
};
i2c_8: i2c at 12CE0000 {
@@ -216,6 +267,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
};
spi_1: spi at 12d30000 {
@@ -227,6 +280,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
};
spi_2: spi at 12d40000 {
@@ -238,6 +293,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
};
dwmmc_0: dwmmc0 at 12200000 {
@@ -283,6 +340,8 @@
samsung,supports-rstclr;
samsung,supports-secdai;
samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
};
i2s1: i2s at 12D60000 {
@@ -291,6 +350,8 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
};
i2s2: i2s at 12D70000 {
@@ -299,6 +360,8 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
};
amba {
@@ -345,253 +408,6 @@
};
};
- gpio-controllers {
- #address-cells = <1>;
- #size-cells = <1>;
- gpio-controller;
- ranges;
-
- gpa0: gpio-controller at 11400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa1: gpio-controller at 11400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa2: gpio-controller at 11400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb0: gpio-controller at 11400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb1: gpio-controller at 11400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb2: gpio-controller at 114000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb3: gpio-controller at 114000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc0: gpio-controller at 114000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc1: gpio-controller at 11400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc2: gpio-controller at 11400120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc3: gpio-controller at 11400140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc4: gpio-controller at 114002E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114002E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd0: gpio-controller at 11400160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd1: gpio-controller at 11400180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy0: gpio-controller at 114001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy1: gpio-controller at 114001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy2: gpio-controller at 114001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy3: gpio-controller at 11400200 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400200 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy4: gpio-controller at 11400220 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400220 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy5: gpio-controller at 11400240 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400240 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy6: gpio-controller at 11400260 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400260 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx0: gpio-controller at 11400C00 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C00 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx1: gpio-controller at 11400C20 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C20 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx2: gpio-controller at 11400C40 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C40 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx3: gpio-controller at 11400C60 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C60 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe0: gpio-controller at 13400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe1: gpio-controller at 13400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf0: gpio-controller at 13400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf1: gpio-controller at 13400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg0: gpio-controller at 13400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg1: gpio-controller at 134000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg2: gpio-controller at 134000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gph0: gpio-controller at 134000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gph1: gpio-controller at 13400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv0: gpio-controller at 10D10000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv1: gpio-controller at 10D10020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv2: gpio-controller at 10D10040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv3: gpio-controller at 10D10060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv4: gpio-controller at 10D10080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D100C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpz: gpio-controller at 03860000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x03860000 0x20>;
- #gpio-cells = <4>;
- };
- };
-
gsc_0: gsc at 0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
--
1.6.6.rc2
More information about the linux-arm-kernel
mailing list