[PATCH 1/2] clk: sunxi: rename compatible strings
Emilio López
emilio at elopez.com.ar
Wed Mar 27 05:30:21 EDT 2013
Hi Mike,
El 27/03/13 05:40, Mike Turquette escribió:
> Quoting Emilio López (2013-03-26 19:39:17)
>> During the introduction of the Allwinner SoC platforms, sunxi was
>> initially meant as a generic name for all the variants of the Allwinner
>> SoC.
>>
>> It was ok at the time of the support of only the A10 and A13 that
>> look pretty much the same; but it's beginning to be troublesome with
>> the future addition of the Allwinner A31 (sun6i) that is quite
>> different, and would introduce some weird logic, where sunxi would
>> actually mean in some case sun4i and sun5i but without sun6i...
>>
>> Moreover, it makes the compatible strings naming scheme not consistent
>> with other architectures, where usually for this kind of compability, we
>> just use the oldest SoC name that has this IP, so let's do just this.
>>
>> Signed-off-by: Emilio López <emilio at elopez.com.ar>
>
> Which tree did you want this patch to go through?
This one should go through your tree, as you have the rest of the driver
on it.
Thanks,
Emilio
>
> Regards,
> Mike
>
>> ---
>>
>> These compatible strings have never been on a released kernel, so
>> changing them now shouldn't cause any issues. Also see Maxime's
>> "ARM: sunxi: Architecture cleanups and rework" which does the same for
>> the rest of sunxi code.
>>
>> Documentation/devicetree/bindings/clock/sunxi.txt | 22 +++++++++++-----------
>> drivers/clk/sunxi/clk-sunxi.c | 16 ++++++++--------
>> 2 files changed, 19 insertions(+), 19 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
>> index b23cfbd..20b8479 100644
>> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
>> @@ -6,14 +6,14 @@ This binding uses the common clock binding[1].
>>
>> Required properties:
>> - compatible : shall be one of the following:
>> - "allwinner,sunxi-osc-clk" - for a gatable oscillator
>> - "allwinner,sunxi-pll1-clk" - for the main PLL clock
>> - "allwinner,sunxi-cpu-clk" - for the CPU multiplexer clock
>> - "allwinner,sunxi-axi-clk" - for the sunxi AXI clock
>> - "allwinner,sunxi-ahb-clk" - for the sunxi AHB clock
>> - "allwinner,sunxi-apb0-clk" - for the sunxi APB0 clock
>> - "allwinner,sunxi-apb1-clk" - for the sunxi APB1 clock
>> - "allwinner,sunxi-apb1-mux-clk" - for the sunxi APB1 clock muxing
>> + "allwinner,sun4i-osc-clk" - for a gatable oscillator
>> + "allwinner,sun4i-pll1-clk" - for the main PLL clock
>> + "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
>> + "allwinner,sun4i-axi-clk" - for the AXI clock
>> + "allwinner,sun4i-ahb-clk" - for the AHB clock
>> + "allwinner,sun4i-apb0-clk" - for the APB0 clock
>> + "allwinner,sun4i-apb1-clk" - for the APB1 clock
>> + "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
>>
>> Required properties for all clocks:
>> - reg : shall be the control register address for the clock.
>> @@ -24,21 +24,21 @@ For example:
>>
>> osc24M: osc24M at 01c20050 {
>> #clock-cells = <0>;
>> - compatible = "allwinner,sunxi-osc-clk";
>> + compatible = "allwinner,sun4i-osc-clk";
>> reg = <0x01c20050 0x4>;
>> clocks = <&osc24M_fixed>;
>> };
>>
>> pll1: pll1 at 01c20000 {
>> #clock-cells = <0>;
>> - compatible = "allwinner,sunxi-pll1-clk";
>> + compatible = "allwinner,sun4i-pll1-clk";
>> reg = <0x01c20000 0x4>;
>> clocks = <&osc24M>;
>> };
>>
>> cpu: cpu at 01c20054 {
>> #clock-cells = <0>;
>> - compatible = "allwinner,sunxi-cpu-clk";
>> + compatible = "allwinner,sun4i-cpu-clk";
>> reg = <0x01c20054 0x4>;
>> clocks = <&osc32k>, <&osc24M>, <&pll1>;
>> };
>> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
>> index d4ad1c2..d528a24 100644
>> --- a/drivers/clk/sunxi/clk-sunxi.c
>> +++ b/drivers/clk/sunxi/clk-sunxi.c
>> @@ -305,29 +305,29 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
>> /* Matches for of_clk_init */
>> static const __initconst struct of_device_id clk_match[] = {
>> {.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
>> - {.compatible = "allwinner,sunxi-osc-clk", .data = sunxi_osc_clk_setup,},
>> + {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,},
>> {}
>> };
>>
>> /* Matches for factors clocks */
>> static const __initconst struct of_device_id clk_factors_match[] = {
>> - {.compatible = "allwinner,sunxi-pll1-clk", .data = &pll1_data,},
>> - {.compatible = "allwinner,sunxi-apb1-clk", .data = &apb1_data,},
>> + {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,},
>> + {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,},
>> {}
>> };
>>
>> /* Matches for divider clocks */
>> static const __initconst struct of_device_id clk_div_match[] = {
>> - {.compatible = "allwinner,sunxi-axi-clk", .data = &axi_data,},
>> - {.compatible = "allwinner,sunxi-ahb-clk", .data = &ahb_data,},
>> - {.compatible = "allwinner,sunxi-apb0-clk", .data = &apb0_data,},
>> + {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,},
>> + {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,},
>> + {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,},
>> {}
>> };
>>
>> /* Matches for mux clocks */
>> static const __initconst struct of_device_id clk_mux_match[] = {
>> - {.compatible = "allwinner,sunxi-cpu-clk", .data = &cpu_data,},
>> - {.compatible = "allwinner,sunxi-apb1-mux-clk", .data = &apb1_mux_data,},
>> + {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
>> + {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
>> {}
>> };
>>
>> --
>> 1.8.2
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the linux-arm-kernel
mailing list