[PATCH 024/142] ARM: shmobile: sh73a0: Support sparse GPIO numbers
Simon Horman
horms+renesas at verge.net.au
Mon Mar 18 07:05:20 EDT 2013
From: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/mach-shmobile/board-ag5evm.c | 26 ++++-----
arch/arm/mach-shmobile/board-kota2.c | 42 +++++++--------
arch/arm/mach-shmobile/board-kzm9g.c | 14 ++---
arch/arm/mach-shmobile/include/mach/sh73a0.h | 2 +-
drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 75 ++++++++++++++------------
5 files changed, 84 insertions(+), 75 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 8ff53a1..a4ac46a 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -304,9 +304,9 @@ static int lcd_backlight_set_brightness(int brightness)
if (brightness == 0) {
/* Reset the chip */
- gpio_set_value(GPIO_PORT235, 0);
+ gpio_set_value(235, 0);
mdelay(24);
- gpio_set_value(GPIO_PORT235, 1);
+ gpio_set_value(235, 1);
return 0;
}
@@ -406,7 +406,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT251,
+ .cd_gpio = 251,
};
static struct resource sdhi0_resources[] = {
@@ -461,7 +461,7 @@ static struct regulator_init_data cn4_power_init_data = {
static struct fixed_voltage_config cn4_power_info = {
.supply_name = "CN4 SD/MMC Vdd",
.microvolts = 3300000,
- .gpio = GPIO_PORT114,
+ .gpio = 114,
.enable_high = 1,
.init_data = &cn4_power_init_data,
};
@@ -479,10 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
- int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+ int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
"sdhi1_power");
if (!ret)
- power_gpio = GPIO_PORT114;
+ power_gpio = 114;
}
/*
@@ -493,7 +493,7 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
* regulator driver. We have to live with the race in case the driver
* gets unloaded and the GPIO freed between these two steps.
*/
- gpio_set_value(GPIO_PORT114, state);
+ gpio_set_value(114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
@@ -603,11 +603,11 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
@@ -622,13 +622,13 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
/* LCD panel */
- gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
- gpio_set_value(GPIO_PORT217, 1);
+ gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
- gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+ gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 2ccc860..b6f0515 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -135,17 +135,17 @@ static struct platform_device keysc_device = {
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
- GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
- GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
- GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
- GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
- GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
- GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
- GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
- /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
- GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
- /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+ GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
+ GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
+ GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
+ GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
+ GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
+ GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
+ GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
+ GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
+ /* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
+ GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
+ /* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
};
static struct gpio_keys_platform_data gpio_key_info = {
@@ -165,9 +165,9 @@ static struct platform_device gpio_keys_device = {
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
- GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
- GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+ GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
+ GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
+ GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
};
static struct gpio_led_platform_data gpio_leds_info = {
@@ -187,7 +187,7 @@ static struct platform_device gpio_leds_device = {
static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
.name = "V2513",
.pin_gpio_fn = GPIO_FN_TPU1TO2,
- .pin_gpio = GPIO_PORT153,
+ .pin_gpio = 153,
.channel_offset = 0x90,
.timer_bit = 2,
.max_brightness = 1000,
@@ -215,7 +215,7 @@ static struct platform_device leds_tpu12_device = {
static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
.name = "V2514",
.pin_gpio_fn = GPIO_FN_TPU4TO1,
- .pin_gpio = GPIO_PORT199,
+ .pin_gpio = 199,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -243,7 +243,7 @@ static struct platform_device leds_tpu41_device = {
static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
.name = "V2515",
.pin_gpio_fn = GPIO_FN_TPU2TO1,
- .pin_gpio = GPIO_PORT197,
+ .pin_gpio = 197,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
@@ -271,7 +271,7 @@ static struct platform_device leds_tpu21_device = {
static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
.name = "KEYLED",
.pin_gpio_fn = GPIO_FN_TPU3TO0,
- .pin_gpio = GPIO_PORT163,
+ .pin_gpio = 163,
.channel_offset = 0x10,
.timer_bit = 0,
.max_brightness = 1000,
@@ -474,8 +474,8 @@ static void __init kota2_init(void)
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_CS5A_, NULL);
gpio_request(GPIO_FN_WE0__FWE, NULL);
- gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+ gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -507,7 +507,7 @@ static void __init kota2_init(void)
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
- gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+ gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* SDHI0 (microSD) */
gpio_request(GPIO_FN_SDHICD0_PU, NULL);
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 7f3a6b7..65a5e0b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -433,7 +433,7 @@ static struct sh_mobile_sdhi_info sdhi2_info = {
TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = GPIO_PORT13,
+ .cd_gpio = 13,
};
static struct resource sdhi2_resources[] = {
@@ -672,7 +672,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
/* SMSC */
- gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
+ gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
@@ -702,11 +702,11 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
- gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
+ gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+ gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
/* Touchscreen */
- gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
+ gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
@@ -730,7 +730,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
- gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
+ gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* enable Micro SD */
gpio_request(GPIO_FN_SDHID2_0, NULL);
@@ -739,7 +739,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
- gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
+ gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 606d31d..4dca135 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -94,7 +94,7 @@ enum {
GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
/* Table 25-1 (Function 0-7) */
- GPIO_FN_VBUS_0,
+ GPIO_FN_VBUS_0 = 310,
GPIO_FN_GPI0,
GPIO_FN_GPI1,
GPIO_FN_GPI2,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
index 639b5e2..9cef0d8 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
@@ -1543,7 +1543,14 @@ static struct sh_pfc_pin pinmux_pins[] = {
GPIO_PORT_ALL(),
};
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
+static struct pinmux_range pinmux_ranges[] = {
+ {.begin = 0, .end = 118,},
+ {.begin = 128, .end = 164,},
+ {.begin = 192, .end = 282,},
+ {.begin = 288, .end = 309,},
+};
+
+#define PINMUX_FN_BASE GPIO_FN_VBUS_0
static struct pinmux_func pinmux_func_gpios[] = {
/* Table 25-1 (Functions 0-7) */
@@ -2738,38 +2745,38 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
static struct pinmux_irq pinmux_irqs[] = {
- PINMUX_IRQ(EXT_IRQ16H(19), GPIO_PORT9),
- PINMUX_IRQ(EXT_IRQ16L(1), GPIO_PORT10),
- PINMUX_IRQ(EXT_IRQ16L(0), GPIO_PORT11),
- PINMUX_IRQ(EXT_IRQ16H(18), GPIO_PORT13),
- PINMUX_IRQ(EXT_IRQ16H(20), GPIO_PORT14),
- PINMUX_IRQ(EXT_IRQ16H(21), GPIO_PORT15),
- PINMUX_IRQ(EXT_IRQ16H(31), GPIO_PORT26),
- PINMUX_IRQ(EXT_IRQ16H(30), GPIO_PORT27),
- PINMUX_IRQ(EXT_IRQ16H(29), GPIO_PORT28),
- PINMUX_IRQ(EXT_IRQ16H(22), GPIO_PORT40),
- PINMUX_IRQ(EXT_IRQ16H(23), GPIO_PORT53),
- PINMUX_IRQ(EXT_IRQ16L(10), GPIO_PORT54),
- PINMUX_IRQ(EXT_IRQ16L(9), GPIO_PORT56),
- PINMUX_IRQ(EXT_IRQ16H(26), GPIO_PORT115),
- PINMUX_IRQ(EXT_IRQ16H(27), GPIO_PORT116),
- PINMUX_IRQ(EXT_IRQ16H(28), GPIO_PORT117),
- PINMUX_IRQ(EXT_IRQ16H(24), GPIO_PORT118),
- PINMUX_IRQ(EXT_IRQ16L(6), GPIO_PORT147),
- PINMUX_IRQ(EXT_IRQ16L(2), GPIO_PORT149),
- PINMUX_IRQ(EXT_IRQ16L(7), GPIO_PORT150),
- PINMUX_IRQ(EXT_IRQ16L(12), GPIO_PORT156),
- PINMUX_IRQ(EXT_IRQ16L(4), GPIO_PORT159),
- PINMUX_IRQ(EXT_IRQ16H(25), GPIO_PORT164),
- PINMUX_IRQ(EXT_IRQ16L(8), GPIO_PORT223),
- PINMUX_IRQ(EXT_IRQ16L(3), GPIO_PORT224),
- PINMUX_IRQ(EXT_IRQ16L(5), GPIO_PORT227),
- PINMUX_IRQ(EXT_IRQ16H(17), GPIO_PORT234),
- PINMUX_IRQ(EXT_IRQ16L(11), GPIO_PORT238),
- PINMUX_IRQ(EXT_IRQ16L(13), GPIO_PORT239),
- PINMUX_IRQ(EXT_IRQ16H(16), GPIO_PORT249),
- PINMUX_IRQ(EXT_IRQ16L(14), GPIO_PORT251),
- PINMUX_IRQ(EXT_IRQ16L(9), GPIO_PORT308),
+ PINMUX_IRQ(EXT_IRQ16H(19), 9),
+ PINMUX_IRQ(EXT_IRQ16L(1), 10),
+ PINMUX_IRQ(EXT_IRQ16L(0), 11),
+ PINMUX_IRQ(EXT_IRQ16H(18), 13),
+ PINMUX_IRQ(EXT_IRQ16H(20), 14),
+ PINMUX_IRQ(EXT_IRQ16H(21), 15),
+ PINMUX_IRQ(EXT_IRQ16H(31), 26),
+ PINMUX_IRQ(EXT_IRQ16H(30), 27),
+ PINMUX_IRQ(EXT_IRQ16H(29), 28),
+ PINMUX_IRQ(EXT_IRQ16H(22), 40),
+ PINMUX_IRQ(EXT_IRQ16H(23), 53),
+ PINMUX_IRQ(EXT_IRQ16L(10), 54),
+ PINMUX_IRQ(EXT_IRQ16L(9), 56),
+ PINMUX_IRQ(EXT_IRQ16H(26), 115),
+ PINMUX_IRQ(EXT_IRQ16H(27), 116),
+ PINMUX_IRQ(EXT_IRQ16H(28), 117),
+ PINMUX_IRQ(EXT_IRQ16H(24), 118),
+ PINMUX_IRQ(EXT_IRQ16L(6), 147),
+ PINMUX_IRQ(EXT_IRQ16L(2), 149),
+ PINMUX_IRQ(EXT_IRQ16L(7), 150),
+ PINMUX_IRQ(EXT_IRQ16L(12), 156),
+ PINMUX_IRQ(EXT_IRQ16L(4), 159),
+ PINMUX_IRQ(EXT_IRQ16H(25), 164),
+ PINMUX_IRQ(EXT_IRQ16L(8), 223),
+ PINMUX_IRQ(EXT_IRQ16L(3), 224),
+ PINMUX_IRQ(EXT_IRQ16L(5), 227),
+ PINMUX_IRQ(EXT_IRQ16H(17), 234),
+ PINMUX_IRQ(EXT_IRQ16L(11), 238),
+ PINMUX_IRQ(EXT_IRQ16L(13), 239),
+ PINMUX_IRQ(EXT_IRQ16H(16), 249),
+ PINMUX_IRQ(EXT_IRQ16L(14), 251),
+ PINMUX_IRQ(EXT_IRQ16L(9), 308),
};
struct sh_pfc_soc_info sh73a0_pinmux_info = {
@@ -2782,6 +2789,8 @@ struct sh_pfc_soc_info sh73a0_pinmux_info = {
.pins = pinmux_pins,
.nr_pins = ARRAY_SIZE(pinmux_pins),
+ .ranges = pinmux_ranges,
+ .nr_ranges = ARRAY_SIZE(pinmux_ranges),
.func_gpios = pinmux_func_gpios,
.nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
--
1.7.10.4
More information about the linux-arm-kernel
mailing list