[PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1

Sekhar Nori nsekhar at ti.com
Fri Mar 15 01:43:29 EDT 2013


On 3/15/2013 10:51 AM, Philip, Avinash wrote:
> On Fri, Mar 15, 2013 at 10:38:58, Nori, Sekhar wrote:
>> On 3/15/2013 10:27 AM, Philip, Avinash wrote:
>>> On Thu, Mar 14, 2013 at 18:31:52, Nori, Sekhar wrote:
>>>> On 3/14/2013 4:07 PM, Philip Avinash wrote:
>>>>> da850 platforms require TBCLK synchronization in CFG_CHIP1 register for
>>>>> TBCLK enable in EHRPWM modules. Enabling of TBCLK is done only if EHRPWM
>>>>> DT node status is set to "okay" DT blob.
>>>>> Also adds macro definitions for DA8XX_EHRPWM_TBCLKSYNC and
>>>>> DA8XX_CFGCHIP1_REG.
>>>>
>>>> So there is actually a TBCLK in DA850 - it's just not modeled as a clock
>>>> similar to the way it is done on AM335x? If yes, then instead of adding
>>>> a dummy clock node and doing the TBCLK enable as part of init, why not
>>>> model TBCLK in clock tree even on DA850?
>>>
>>>
>>> TBCLK enabling should done from platform specific way. In DA850 it is done at
>>> CFGCHIP1 register. Unfortunately Davinci clock frame work will support only
>>> clock nodes inside PLLC and PSC modules. Handling of CFGCHP1 require
>>
>> That's true at the moment, but that can be fixed.
> 
> I will check.

For an example of non-PLL non-PSC clock on davinci, you can look at cdce
clock registration in board-dm646x-evm.c

> 
>>
>>> modifications in clock frame work.
>>>
>>> Hence handling it as part of initialization.
>>
>> I am curious as to how this clock is handled in am335x. I searched for
>> tbclk in arch/arm/ of linux-next but could not find any references.
>> Where should I be looking?
> 
> Patch is submitted. This patch is not in Paul's tree.
> 
> [PATCH v2] ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK
> https://patchwork.kernel.org/patch/2127581/

Thanks!

~Sekhar



More information about the linux-arm-kernel mailing list