[PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver
Arnd Bergmann
arnd at arndb.de
Thu Mar 28 17:55:00 EDT 2013
From: Manjunath Goudar <manjunath.goudar at linaro.org>
Separate the SPEAr host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before SPEAr can be
booted with a multi-platform kernel, but they are queued in the
arm-soc tree for 3.10.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the SPEAr bus glue.
In V3:
-Detailed commit message added here about why this patch is required.
-Eliminated ehci_spear_setup routine beacuse hcd registers
directly setting in spear_ehci_hcd_drv_probe function.
-spear_overrides struct initialized.
-Eliminate struct ehci_hcd ehci from struct spear_ehci,to enable SPEAr clock
uses directly usb_hcd *hcd in spear_start_ehci function.
-to_spear_ehci() macro modified for spear_ehci.
In V2:
Replaced spear as SPEAr everywhere, leaving functions/variables/config options.
Signed-off-by: Deepak Saxena <dsaxena at linaro.org>
Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Acked-by: Viresh Kumar <viresh.linux at gmail.com>
Cc: Greg KH <greg at kroah.com>
Cc: Alan Stern <stern at rowland.harvard.edu>
Cc: Shiraz Hashim <shiraz.hashim at st.com>
Cc: linux-usb at vger.kernel.org
Cc: spear-devel at list.st.com
---
drivers/usb/host/Kconfig | 8 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +--
drivers/usb/host/ehci-spear.c | 88 ++++++++++++++++++++-----------------------
4 files changed, 51 insertions(+), 52 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d89b7ad..12fb83e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -173,6 +173,14 @@ config USB_EHCI_HCD_ORION
Armada 370. This is different from the EHCI implementation
on Marvell's mobile PXA and MMP SoC, see USB_EHCI_MV for those.
+config USB_EHCI_HCD_SPEAR
+ tristate "Support for ST SPEAr on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ ST SPEAr chips.
+
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MSM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9492f50..3e02471 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
+obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1f97268..c8c70a1 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1264,11 +1264,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
-#ifdef CONFIG_PLAT_SPEAR
-#include "ehci-spear.c"
-#define PLATFORM_DRIVER spear_ehci_hcd_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_MSM
#include "ehci-msm.c"
#define PLATFORM_DRIVER ehci_msm_driver
@@ -1315,6 +1310,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 210bb67..d3a5859 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -1,5 +1,5 @@
/*
-* Driver for EHCI HCD on SPEAR SOC
+* Driver for EHCI HCD on SPEAr SOC
*
* Copyright (C) 2010 ST Micro Electronics,
* Deepak Sikri <deepak.sikri at st.com>
@@ -12,17 +12,28 @@
*/
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI SPEAr driver"
+
+static const char hcd_name[] = "SPEAr-ehci";
struct spear_ehci {
- struct ehci_hcd ehci;
struct clk *clk;
};
-#define to_spear_ehci(hcd) (struct spear_ehci *)hcd_to_ehci(hcd)
+#define to_spear_ehci(hcd) (struct spear_ehci *)(hcd_to_ehci(hcd)->priv)
static void spear_start_ehci(struct spear_ehci *ehci)
{
@@ -34,49 +45,7 @@ static void spear_stop_ehci(struct spear_ehci *ehci)
clk_disable_unprepare(ehci->clk);
}
-static int ehci_spear_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- /* registers start at offset 0x0 */
- ehci->caps = hcd->regs;
-
- return ehci_setup(hcd);
-}
-
-static const struct hc_driver ehci_spear_hc_driver = {
- .description = hcd_name,
- .product_desc = "SPEAr EHCI",
- .hcd_priv_size = sizeof(struct spear_ehci),
-
- /* generic hardware linkage */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /* basic lifecycle operations */
- .reset = ehci_spear_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /* managing i/o requests and associated device resources */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /* scheduling support */
- .get_frame_number = ehci_get_frame,
-
- /* root hub support */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static struct hc_driver __read_mostly ehci_spear_hc_driver;
#ifdef CONFIG_PM_SLEEP
static int ehci_spear_drv_suspend(struct device *dev)
@@ -161,7 +130,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
goto err_put_hcd;
}
- ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
+ ehci = to_spear_ehci(hcd);
ehci->clk = usbh_clk;
spear_start_ehci(ehci);
@@ -216,4 +185,29 @@ static struct platform_driver spear_ehci_hcd_driver = {
}
};
+static const struct ehci_driver_overrides spear_overrides __initdata = {
+ .extra_priv_size = sizeof(struct spear_ehci),
+};
+
+static int __init ehci_spear_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides);
+ return platform_driver_register(&spear_ehci_hcd_driver);
+}
+module_init(ehci_spear_init);
+
+static void __exit ehci_spear_cleanup(void)
+{
+ platform_driver_unregister(&spear_ehci_hcd_driver);
+}
+module_exit(ehci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:spear-ehci");
+MODULE_AUTHOR("Deepak Sikri");
+MODULE_LICENSE("GPL");
--
1.8.1.2
More information about the linux-arm-kernel
mailing list