[PATCH V5 4/4] arm: dts: Add cpufreq controller node for Exynos5440 SoC

[Amit Daniel Kachhap]

Add cpufreq controller device node for Exynos5440 SoC for passing
parameters like controller base address, interrupt and cpufreq
table. This node is added outside cpu0 as this driver is now a platform
driver and a new device structure is needed.

Signed-off-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
---
 arch/arm/boot/dts/exynos5440.dtsi |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 9a99755..94074ea 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -63,6 +63,18 @@
 
 	};
 
+	cpufreq at 160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				/* KHz	  uV */
+				1200000 1025000
+				1000000 975000
+				800000  925000
+		>;
+	};
+
 	serial at B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
-- 
1.7.1