[PATCH V2 2/8] ARM: dts: OMAP36xx: Add CPU OPP table

Nishanth Menon nm at ti.com
Tue Mar 19 13:53:04 EDT 2013


Add DT OPP table for OMAP36xx/37xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function.

OPP data here is based on existing opp3xxx_data.c

This is in preparation to use generic cpufreq-cpu0 driver for device
tree enabled boot. Legacy non device tree enabled boot continues to
use omap-cpufreq.c and opp3xxx_data.c.

Cc: Kevin Hilman <khilman at deeprootsystems.com>
Cc: Jon Hunter <jon-hunter at ti.com>
Cc: "Benoît Cousson" <b-cousson at ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Keerthy <j-keerthy at ti.com>
Cc: linux-omap at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: cpufreq at vger.kernel.org
Cc: linux-pm at vger.kernel.org

Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes in V2:
	- donot delete the OPP table entries in omap3xxx_data.c
	- little more verbose commit log
V1: https://patchwork.kernel.org/patch/2273681/

 arch/arm/boot/dts/omap36xx.dtsi |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 96bf028..b89233e 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -15,6 +15,19 @@
 		serial3 = &uart4;
 	};
 
+	cpus {
+		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		cpu at 0 {
+			operating-points = <
+				/* kHz    uV */
+				300000   975000
+				600000  1075000
+				800000  1200000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
 	ocp {
 		uart4: serial at 49042000 {
 			compatible = "ti,omap3-uart";
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list