November 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Nov 1 00:38:33 EDT 2013
Ending: Sat Nov 30 18:05:49 EST 2013
Messages: 6665

• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Arnaud Patard (Rtp)
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Arnaud Patard (Rtp)
• [PATCH v2 09/13] ARM: Disable jprobe selftests in thumb kernels   Jon Medhurst (Tixy)
• [PATCH v2 07/13] ARM: move generic thumb instruction parsing code to new files for use by other features   Jon Medhurst (Tixy)
• [PATCH v2 08/13] ARM: use a function table for determining instruction interpreter actions   Jon Medhurst (Tixy)
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Jon Medhurst (Tixy)
• [PATCH v2 11/13] ARM: Finish renaming ARM kprobes APIs for sharing with uprobes   Jon Medhurst (Tixy)
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Jon Medhurst (Tixy)
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Jon Medhurst (Tixy)
• [PATCH v3 06/15] ARM: Disable jprobes test when built into thumb-mode kernel   Jon Medhurst (Tixy)
• [GIT PULL] iommu/arm-smmu: updates for 3.13   joro at 8bytes.org
• [RFC 0/4] Intermix Lowmem and vmalloc   Laura Abbott
• [RFC PATCH 1/4] arm: mm: Add iotable_init_novmreserve   Laura Abbott
• [RFC PATCH 2/4] arm: mm: Track lowmem in vmalloc   Laura Abbott
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Laura Abbott
• [RFC PATCH 4/4] mm/vmalloc.c: Treat the entire kernel virtual space as vmalloc   Laura Abbott
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Laura Abbott
• [RFC 0/4] Intermix Lowmem and vmalloc   Laura Abbott
• [RFC PATCHv2 0/4] Intermix Lowmem and Vmalloc   Laura Abbott
• [RFC PATCHv2 1/4] arm: mm: Add iotable_init_novmreserve   Laura Abbott
• [RFC PATCHv2 2/4] arm: mm: Track lowmem in vmalloc   Laura Abbott
• [RFC PATCHv2 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Laura Abbott
• [RFC PATCHv2 4/4] mm/vmalloc.c: Treat the entire kernel virtual space as vmalloc   Laura Abbott
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Laura Abbott
• [RFC PATCH 4/4] mm/vmalloc.c: Treat the entire kernel virtual space as vmalloc   Laura Abbott
• CMA on AArch64   Laura Abbott
• [PATCH] ARM: unwinder: Handle Stackoverflow in unwind_exec_insn   Anurag Aggarwal
• [PATCH] ARM: unwinder: Handle Stackoverflow in unwind_exec_insn   Anurag Aggarwal
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow in unwind_exec_insn Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Anurag Aggarwal
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Anurag Aggarwal
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Anurag Aggarwal
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Anurag Aggarwal
• [PATCH 0/3] regulator: tps6586x: add version detection and voltage tables   Stefan Agner
• [PATCH 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH 2/3] regulator: tps6586x: add voltage table for tps658643   Stefan Agner
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Stefan Agner
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Stefan Agner
• [PATCH 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH 2/3] regulator: tps6586x: add voltage table for tps658643   Stefan Agner
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Stefan Agner
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Stefan Agner
• [PATCH 5/5] mmc: sdhci-esdhc-imx: add runtime pm support   Dong Aisheng
• [PATCH v2 0/5] mmc: sdhci-esdhc-imx: add runtime pm support   Dong Aisheng
• [PATCH v2 1/5] mmc: sdhci-pltfm: export pltfm suspend/resume api   Dong Aisheng
• [PATCH v2 2/5] mmc: sdhci-esdhc-imx: tuning bits should not be cleared during reset   Dong Aisheng
• [PATCH v2 3/5] mmc: sdhci-esdhc-imx: clear SDHCI_CTRL_EXEC_TUNING should not affect other bits   Dong Aisheng
• [PATCH v2 4/5] mmc: sdhci-esdhc-imx: fix runtime pm unblance issue   Dong Aisheng
• [PATCH v2 5/5] mmc: sdhci-esdhc-imx: add runtime pm support   Dong Aisheng
• [PATCH v2 0/6] mmc: sdhci-esdhc-imx: fix acmd23 unwork and ddr not supported on sabresd issues   Dong Aisheng
• [PATCH 2/2] mmc: sdhci-esdhc-imx: add eMMC HS200 mode support   Dong Aisheng
• [PATCH v2 0/5] mmc: sdhci-esdhc-imx: add runtime pm support   Dong Aisheng
• mx6qsabresd: Adding eMMC suport   Dong Aisheng
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Pratyush Anand
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Pratyush Anand
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Pratyush Anand
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Doug Anderson
• [PATCH] ARM: dts: Add max77686 RTC interrupt to cros5250-common   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Doug Anderson
• [PATCH v2] watchdog: s3c2410_wdt: Only register for cpufreq on ARM_S3C24XX_CPUFREQ   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Doug Anderson
• [PATCH v2] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Doug Anderson
• [PATCH 00/11] RFC: Common machine reset handling   Domenico Andreoli
• [PATCH 04/11] MIPS: use the common machine reset handling   Domenico Andreoli
• address translation for PCIe-to-localbus bridge   Pantelis Antoniou
• address translation for PCIe-to-localbus bridge   Pantelis Antoniou
• ACPI vs DT at runtime   Pantelis Antoniou
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   H. Peter Anvin
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   H. Peter Anvin
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   H. Peter Anvin
• [PATCH 4/4] arm64: advertise CPU features for modalias matching   H. Peter Anvin
• [PATCH] use -fstack-protector-strong   H. Peter Anvin
• [PATCH v2] use -fstack-protector-strong   H. Peter Anvin
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   Ard
• [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support   Alexander Aring
• [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support   Alexander Aring
• [PATCH] ARM: pxa/colibri: fix build with CONFIG_USB_OHCI_HCD=y   Dmitry Artamonow
• [PATCH 4/5] arm: sa1100: add a clock alias for sa1111 pcmcia device   Dmitry Artamonow
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Artamonow
• kernel BUG at kernel/kallsyms.c:222!   Jonathan Austin
• [PATCH 1/2] ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD   Jonathan Austin
• kernel BUG at kernel/kallsyms.c:222!   Jonathan Austin
• [PATCH 1/2] ARM: default PHYS_OFFSET if !MMU   Jonathan Austin
• [PATCH 04/24] mm/block: remove unnecessary inclusion of bootmem.h   Jens Axboe
• [PATCH 0/3] watchdog: at91sam9_wdt: various fixes and improvements   Boris BREZILLON
• [PATCH 1/3] watchdog: at91sam9_wdt: fix secs_to_ticks   Boris BREZILLON
• [PATCH 2/3] watchdog: at91sam9_wdt: avoid spurious watchdog reset during init   Boris BREZILLON
• [PATCH 3/3] watchdog: at91sam9_wdt: increase security margin on watchdog counter reset   Boris BREZILLON
• [PATCH v5 00/17] ARM: at91: move to common clk framework   Boris BREZILLON
• [PATCH v5 01/17] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h   Boris BREZILLON
• [PATCH v5 02/17] ARM: at91: add Kconfig options for common clk support   Boris BREZILLON
• [PATCH v5 03/17] clk: at91: add PMC base support   Boris BREZILLON
• [PATCH v5 04/17] clk: at91: add PMC macro file for dt definitions   Boris BREZILLON
• [PATCH v5 05/17] clk: at91: add PMC main clock   Boris BREZILLON
• [PATCH v5 06/17] clk: at91: add PMC pll clocks   Boris BREZILLON
• [PATCH v5 07/17] clk: at91: add PMC master clock   Boris BREZILLON
• [PATCH v5 08/17] clk: at91: add PMC system clocks   Boris BREZILLON
• [PATCH v5 09/17] clk: at91: add PMC peripheral clocks   Boris BREZILLON
• [PATCH v5 10/17] clk: at91: add peripheral clk macros for peripheral clk dt bindings   Boris BREZILLON
• [PATCH v5 11/17] clk: at91: add PMC programmable clocks   Boris BREZILLON
• [PATCH v5 12/17] clk: at91: add PMC utmi clock   Boris BREZILLON
• [PATCH v5 13/17] clk: at91: add PMC usb clock   Boris BREZILLON
• [PATCH v5 14/17] clk: at91: add PMC smd clock   Boris BREZILLON
• [PATCH v5 15/17] dt: binding: add at91 clks dt bindings documentation   Boris BREZILLON
• [PATCH v5 16/17] ARM: at91: move pit timer to common clk framework   Boris BREZILLON
• [PATCH v5 17/17] ARM: at91: add new compatible strings for pmc driver   Boris BREZILLON
• [PATCH v3 0/6] ARM: at91: use new at91 clks for samad3 SoCs   Boris BREZILLON
• [PATCH v3 1/6] ARM: at91: prepare sama5 dt boards transition to common clk   Boris BREZILLON
• [PATCH v3 2/6] ARM: at91: prepare common clk transition for sama5d3 SoC   Boris BREZILLON
• [PATCH v3 3/6] ARM: at91/dt: define sama5d3 clocks   Boris BREZILLON
• [PATCH v3 4/6] ARM: at91/dt: define sama5d3xek's main clk frequency   Boris BREZILLON
• [PATCH v3 5/6] ARM: at91: move sama5d3 SoC to common clk   Boris BREZILLON
• [PATCH v3 6/6] ARM: at91/dt: remove old clk material   Boris BREZILLON
• [PATCH v2 0/2] clk: add clk accuracy support   Boris BREZILLON
• [PATCH v2 1/2] clk: add clk accuracy retrieval support   Boris BREZILLON
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Boris BREZILLON
• [PATCH v6 00/16] ARM: at91: move to common clk framework   Boris BREZILLON
• [PATCH v6 01/16] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h   Boris BREZILLON
• [PATCH v6 02/16] ARM: at91: add Kconfig options for common clk support   Boris BREZILLON
• [PATCH v6 03/16] clk: at91: add PMC base support   Boris BREZILLON
• [PATCH v6 04/16] clk: at91: add PMC macro file for dt definitions   Boris BREZILLON
• [PATCH v6 05/16] clk: at91: add PMC main clock   Boris BREZILLON
• [PATCH v6 06/16] clk: at91: add PMC pll clocks   Boris BREZILLON
• [PATCH v6 07/16] clk: at91: add PMC master clock   Boris BREZILLON
• [PATCH v6 08/16] clk: at91: add PMC system clocks   Boris BREZILLON
• [PATCH v6 09/16] clk: at91: add PMC peripheral clocks   Boris BREZILLON
• [PATCH v6 10/16] clk: at91: add PMC programmable clocks   Boris BREZILLON
• [PATCH v6 11/16] clk: at91: add PMC utmi clock   Boris BREZILLON
• [PATCH v6 12/16] clk: at91: add PMC usb clock   Boris BREZILLON
• [PATCH v6 13/16] clk: at91: add PMC smd clock   Boris BREZILLON
• [PATCH v6 14/16] dt: binding: add at91 clks dt bindings documentation   Boris BREZILLON
• [PATCH v6 15/16] ARM: at91: move pit timer to common clk framework   Boris BREZILLON
• [PATCH v6 16/16] ARM: at91: add new compatible strings for pmc driver   Boris BREZILLON
• [PATCH v4 0/6] ARM: at91: use new at91 clks for samad3 SoCs   Boris BREZILLON
• [PATCH v4 1/6] ARM: at91: prepare sama5 dt boards transition to common clk   Boris BREZILLON
• [PATCH v4 2/6] ARM: at91: prepare common clk transition for sama5d3 SoC   Boris BREZILLON
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   Boris BREZILLON
• [PATCH v4 4/6] ARM: at91/dt: define sama5d3xek's main clk frequency   Boris BREZILLON
• [PATCH v4 5/6] ARM: at91: move sama5d3 SoC to common clk   Boris BREZILLON
• [PATCH v4 6/6] ARM: at91/dt: remove old clk material   Boris BREZILLON
• [PATCH] clk: add flags to distinguish xtal clocks   Felipe Balbi
• [PATCH] clk: add flags to distinguish xtal clocks   Felipe Balbi
• [PATCH] clk: add flags to distinguish xtal clocks   Felipe Balbi
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Felipe Balbi
• [PATCH] ARM: dts: AM437x GP EVM support   Felipe Balbi
• [PATCH] ARM: dts: AM437x GP EVM support   Felipe Balbi
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Felipe Balbi
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Felipe Balbi
• [Inquiry] How to boot using USB device and configure PCI using OMAP4460/4470?   Felipe Balbi
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Felipe Balbi
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Felipe Balbi
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Felipe Balbi
• [Inquiry] How to boot using USB device and configure PCI using OMAP4460/4470?   Felipe Balbi
• [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver   Felipe Balbi
• [RFT/RFC/PATCH 01/31] arm: omap: irq: make omap_irq_base global   Felipe Balbi
• [RFT/RFC/PATCH 02/31] arm: omap: irq: define INTC_ILR0 register   Felipe Balbi
• [RFT/RFC/PATCH 03/31] arm: omap: irq: start to remove irq_banks array   Felipe Balbi
• [RFT/RFC/PATCH 04/31] arm: omap: irq: add a global omap_nr_irqs variable   Felipe Balbi
• [RFT/RFC/PATCH 05/31] arm: omap: irq: remove rest of irq_banks usage   Felipe Balbi
• [RFT/RFC/PATCH 06/31] arm: omap: irq: remove unused macro   Felipe Balbi
• [RFT/RFC/PATCH 07/31] arm: omap: irq: switch over to intc_readl on omap_intc_handle_irq   Felipe Balbi
• [RFT/RFC/PATCH 08/31] arm: omap: irq: remove unnecessary base_addr argument   Felipe Balbi
• [RFT/RFC/PATCH 09/31] arm: omap: irq: rename omap3_intc_regs   Felipe Balbi
• [RFT/RFC/PATCH 10/31] arm: omap: irq: always define omap3 support   Felipe Balbi
• [RFT/RFC/PATCH 11/31] arm: omap: irq: reorganize code a little bit   Felipe Balbi
• [RFT/RFC/PATCH 12/31] arm: omap: irq: add suspend/resume methods   Felipe Balbi
• [RFT/RFC/PATCH 13/31] arm: omap: irq: remove last bits of our homebrew irqchip pm   Felipe Balbi
• [RFT/RFC/PATCH 14/31] arm: omap: irq: make intc_of_init static   Felipe Balbi
• [RFT/RFC/PATCH 15/31] arm: omap: irq: call set_handle_irq() from intc_of_init   Felipe Balbi
• [RFT/RFC/PATCH 16/31] arm: omap: irq: use IRQCHIP_DECLARE macro   Felipe Balbi
• [RFT/RFC/PATCH 17/31] arm: omap: irq: drop .handle_irq and .init_irq fields   Felipe Balbi
• [RFT/RFC/PATCH 18/31] arm: omap: irq: add specific compatibles for omap3 and am33xx devices   Felipe Balbi
• [RFT/RFC/PATCH 19/31] arm: omap: irq: use compatible flag to figure out number of IRQ lines   Felipe Balbi
• [RFT/RFC/PATCH 20/31] arm: boot: dts: am33xx/omap3: fix intc compatible flag   Felipe Balbi
• [RFT/RFC/PATCH 21/31] arm: omap: irq: drop ti,intc-size support   Felipe Balbi
• [RFT/RFC/PATCH 22/31] arm: boot: dts: omap2/3/am33xx: drop ti, intc-size   Felipe Balbi
• [RFT/RFC/PATCH 23/31] arm: omap: irq: move some more code around   Felipe Balbi
• [RFT/RFC/PATCH 24/31] arm: omap: irq: call set_handle_irq() from .init_irq   Felipe Balbi
• [RFT/RFC/PATCH 25/31] arm: omap: irq: drop omap3_intc_handle_irq()   Felipe Balbi
• [RFT/RFC/PATCH 26/31] arm: omap: irq: drop omap2_intc_handle_irq()   Felipe Balbi
• [RFT/RFC/PATCH 27/31] arm: omap: irq: drop omap_pending_irq()   Felipe Balbi
• [RFT/RFC/PATCH 28/31] arm: omap: irq: remove unnecessary header   Felipe Balbi
• [RFT/RFC/PATCH 29/31] arm: omap: irq: remove nr_irqs argument   Felipe Balbi
• [RFT/RFC/PATCH 30/31] arm: omap: irq: introduce omap_nr_pending   Felipe Balbi
• [RFT/RFC/PATCH 31/31] arm: omap: irq: get rid of ifdef hack   Felipe Balbi
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Felipe Balbi
• [RESEND PATCH v3 1/4] usb: musb: gadget, stay IDLE without gadget driver   Felipe Balbi
• [RESEND PATCH v3 3/4] usb: musb: dsps, debugfs files   Felipe Balbi
• [RESEND PATCH v3 4/4] usb: musb: dsps, use devm_kzalloc   Felipe Balbi
• [RESEND PATCH v3 2/4] usb: musb: Bugfix of_node assignment   Felipe Balbi
• OMAP build failure after this merge window - caused by usb or phy Kconfig krap   Felipe Balbi
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   Felipe Balbi
• [PATCH 3/3] ARM: keystone: defconfig: enable USB host mode support   Felipe Balbi
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   Felipe Balbi
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Felipe Balbi
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Felipe Balbi
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Felipe Balbi
• [PATCH] phy: kconfig: add depends on "USB_SUPPORT" to OMAP_USB2 and TWL4030_USB   Felipe Balbi
• [RESEND PATCH v3 3/4] usb: musb: dsps, debugfs files   Felipe Balbi
• [RESEND PATCH v3 4/4] usb: musb: dsps, use devm_kzalloc   Felipe Balbi
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Felipe Balbi
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH 00/13] mfd: menelaus: a few cleanups   Felipe Balbi
• [PATCH 01/13] mfd: menelaus: drop __exit section annotation   Felipe Balbi
• [PATCH 02/13] mfd: menelaus: switch over to module_i2c_driver   Felipe Balbi
• [PATCH 03/13] mfd: menelaus: convert to threaded irq   Felipe Balbi
• [PATCH 04/13] mfd: menelaus: remove unnecessary loop   Felipe Balbi
• [PATCH 05/13] mfd: menelaus: use for_each_set_bit()   Felipe Balbi
• [PATCH 06/13] mfd: menelaus: pass menelaus pointer as argument to enable/disable irq   Felipe Balbi
• [PATCH 07/13] mfd: menelaus: limit the usage of the_menelaus   Felipe Balbi
• [PATCH 08/13] mfd: menelaus: pass menelaus_chip pointer to add/remove irq functions   Felipe Balbi
• [PATCH 09/13] mfd: menelaus: pass menelaus_chip pointer to get/set voltage   Felipe Balbi
• [PATCH 10/13] mfd: menelaus: pass menelaus_chip argument to menelaus <-> time helpers   Felipe Balbi
• [PATCH 11/13] mfd: menelaus: start to use irqdomain   Felipe Balbi
• [PATCH 12/13] mfd: menelaus: switch all children to threaded_irq   Felipe Balbi
• [PATCH 13/13] mfd: menelaus: remove unnecessary definition   Felipe Balbi
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH 00/13] mfd: menelaus: a few cleanups   Felipe Balbi
• [PATCH 00/13] mfd: menelaus: a few cleanups   Felipe Balbi
• [PATCH v2 0/6] mmc: sdhci-esdhc-imx: fix acmd23 unwork and ddr not supported on sabresd issues   Chris Ball
• [PATCH 0/2] mmc: sdhci-esdhc-imx: adding eMMC HS200 mode support   Chris Ball
• [PATCH v2 0/5] mmc: sdhci-esdhc-imx: add runtime pm support   Chris Ball
• [PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA   Chris Ball
• [PATCH v2 1/2] mmc: arasan: Add driver for Arasan SDHCI   Chris Ball
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Chris Ball
• [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree   Chris Ball
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Chris Ball
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Vaibhav Bedia
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Vaibhav Bedia
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Vaibhav Bedia
• Kernel build failing randomly   Vaibhav Bedia
• Kernel build failing randomly   Vaibhav Bedia
• [rtc-linux] Re: [PATCH v4 0/4] pm: Add power off control   Vaibhav Bedia
• [PATCH 3/4] mfd: sec-core: Add cells for S5M8767-clocks   Tushar Behera
• [PATCH 3/4] mfd: sec-core: Add cells for S5M8767-clocks   Tushar Behera
• [PATCH 0/4] Add support for clocks in S5M8767   Tushar Behera
• [GIT PULL] prefetch support for 3.13   Dirk Behme
• [PATCH 03/10] ARM: imx6q: select ARM and PL310 errata   Dirk Behme
• [PATCH 0/6] PCI: imx6: Random fixes   Jürgen Beisert
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Jürgen Beisert
• ACPI   Jürgen Beisert
• [PATCH v6 1/2] PWM: atmel-pwm: add PWM controller driver   Alexandre Belloni
• [PATCH v6 2/2] PWM: atmel-pwm: add device tree binding document   Alexandre Belloni
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [PATCH v4 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Arnd Bergmann
• [PATCH v4 4/4] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [PATCH v4 4/4] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Arnd Bergmann
• [PATCH 0/3] v7-M support using MULTIPLATFORM   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Arnd Bergmann
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Arnd Bergmann
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Arnd Bergmann
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Arnd Bergmann
• [PATCH v2 5/5] Documentation: Add documentation for APM X-Gene SATA DTS binding   Arnd Bergmann
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Arnd Bergmann
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Arnd Bergmann
• [PATCH v2 5/5] Documentation: Add documentation for APM X-Gene SATA DTS binding   Arnd Bergmann
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Arnd Bergmann
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Arnd Bergmann
• [PATCH 01/11] Add generic fixmap.h   Arnd Bergmann
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Arnd Bergmann
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Arnd Bergmann
• [PATCH v11] dmaengine: Add MOXA ART DMA engine driver   Arnd Bergmann
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Arnd Bergmann
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Arnd Bergmann
• [PATCH 0/3] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY support   Arnd Bergmann
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Arnd Bergmann
• [PATCH 2/3] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY driver   Arnd Bergmann
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Arnd Bergmann
• [PATCH v3 2/4] Documentation: Add documentation for APM X-Gene SATA controllor DTS binding   Arnd Bergmann
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Arnd Bergmann
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• [PATCH v4 0/4] Energy Micro efm32 support   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI   Arnd Bergmann
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Arnd Bergmann
• [PATCH 13/31] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Arnd Bergmann
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Arnd Bergmann
• [PATCH 6/7] mtd: nand: davinci: extend description of bindings   Arnd Bergmann
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Arnd Bergmann
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Arnd Bergmann
• [PATCH v2 4/4] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Arnd Bergmann
• [PATCH v4 2/4] Documentation:: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Arnd Bergmann
• [PATCH v4 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Arnd Bergmann
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI vs DT at runtime   Arnd Bergmann
• ACPI   Arnd Bergmann
• ACPI   Arnd Bergmann
• ACPI   Arnd Bergmann
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   Arnd Bergmann
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   Arnd Bergmann
• [PATCH 1/3] mtd: nand: davinci: reuse driver for Keystone arch   Arnd Bergmann
• [PATCH 0/5] ARM: brcmstb: Add Broadcom STB SoC support   Arnd Bergmann
• [PATCH 2/5] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Arnd Bergmann
• [PATCH RESEND 0/5] ARM: brcmstb: Add Broadcom STB SoC support   Arnd Bergmann
• [PATCH RESEND 3/5] ARM: brcmstb: add misc. DT bindings for brcm, brcmstb   Arnd Bergmann
• [PATCH RESEND 3/5] ARM: brcmstb: add misc. DT bindings for brcm, brcmstb   Arnd Bergmann
• [PATCH v4 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Arnd Bergmann
• [PATCH V2 3/3] ARM: tegra: document use of standard DMA DT bindings   Arnd Bergmann
• [PATCH V2] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH v6] gpio: Add MOXA ART GPIO driver   Arnd Bergmann
• [PATCH v7] gpio: Add MOXA ART GPIO driver   Arnd Bergmann
• [PATCH V2] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH v6] gpio: Add MOXA ART GPIO driver   Arnd Bergmann
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Terje Bergström
• [PATCH v4 1/4] dma: imx-sdma: Add sdma firmware version 2 support   Bharat Bhushan
• [PATCH trivial] arm64: constify hwcap_str   Ard Biesheuvel
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   Ard Biesheuvel
• [RFC PATCH 1/4] x86: move arch_cpu_uevent() to generic code   Ard Biesheuvel
• [RFC PATCH 2/4] cpu: advertise CPU features over udev in a generic way   Ard Biesheuvel
• [RFC PATCH 3/4] scripts/mod: add generic CPU features as module alias   Ard Biesheuvel
• [RFC PATCH 4/4] arm64: advertise CPU features using module aliases   Ard Biesheuvel
• [PATCH trivial] arm64: constify hwcap_str   Ard Biesheuvel
• [RFC PATCH 2/4] cpu: advertise CPU features over udev in a generic way   Ard Biesheuvel
• [RFC PATCH 2/4] cpu: advertise CPU features over udev in a generic way   Ard Biesheuvel
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   Ard Biesheuvel
• [PATCH trivial] arm64: constify hwcap_str   Ard Biesheuvel
• [PATCH trivial] arm64: constify hwcap_str   Ard Biesheuvel
• [RFC v1 PATCH] ARM64: KGDB: Add FP/SIMD debug support   Ard Biesheuvel
• [PATCH 0/4] wire up CPU features to udev based module loading   Ard Biesheuvel
• [PATCH 1/4] x86: move arch_cpu_uevent() to generic code   Ard Biesheuvel
• [PATCH 2/4] cpu: advertise CPU features over udev in a generic way   Ard Biesheuvel
• [PATCH 3/4] x86: align with generic cpu modalias   Ard Biesheuvel
• [PATCH 4/4] arm64: advertise CPU features for modalias matching   Ard Biesheuvel
• [PATCH v3] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH 4/4] arm64: advertise CPU features for modalias matching   Ard Biesheuvel
• [PATCH v2 0/4] wire up CPU features to udev based module loading   Ard Biesheuvel
• [PATCH v2 1/4] x86: move arch_cpu_uevent() to generic code   Ard Biesheuvel
• [PATCH v2 2/4] cpu: advertise CPU features over udev in a generic way   Ard Biesheuvel
• [PATCH v2 3/4] x86: align with generic cpu modalias   Ard Biesheuvel
• [PATCH v2 4/4] arm64: advertise CPU features for modalias matching   Ard Biesheuvel
• crypto dependency in bit sliced AES   Ard Biesheuvel
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Ard Biesheuvel
• [PATCH 2/3] ARM64:DMI: Add smbios/dmi support on arm64   Ard Biesheuvel
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Ard Biesheuvel
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Ard Biesheuvel
• [GIT PULL] Third and final KVM/ARM updates for 3.13   Paolo Bonzini
• [PATCH v3 0/6] Krait L1/L2 EDAC driver   Stephen Boyd
• [PATCH v3 1/6] edac: Don't try to cancel workqueue when it's never setup   Stephen Boyd
• [PATCH v3 2/6] genirq: export percpu irq functions for module usage   Stephen Boyd
• [PATCH v3 3/6] ARM: Add Krait L2 accessor functions   Stephen Boyd
• [PATCH v3 4/6] edac: Document Krait L1/L2 EDAC driver binding   Stephen Boyd
• [PATCH v3 5/6] edac: Add support for Krait CPU cache error detection   Stephen Boyd
• [PATCH v3 6/6] ARM: dts: msm: Add Krait CPU/L2 nodes   Stephen Boyd
• [PATCH 00/11] CPU enable method based SMP/hotplug + MSM conversion   Stephen Boyd
• [PATCH 01/11] devicetree: bindings: Document cpu enable-method for ARM CPUs   Stephen Boyd
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Stephen Boyd
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Stephen Boyd
• [PATCH 04/11] devicetree: bindings: Document qcom,saw2 node   Stephen Boyd
• [PATCH 05/11] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Stephen Boyd
• [PATCH 06/11] ARM: msm: Remove pen_release usage   Stephen Boyd
• [PATCH 07/11] ARM: msm: Re-organize platsmp to make it extensible   Stephen Boyd
• [PATCH 08/11] ARM: msm: Add SMP support for KPSSv1   Stephen Boyd
• [PATCH 09/11] ARM: msm: Add SMP support for KPSSv2   Stephen Boyd
• [PATCH 10/11] ARM: dts: msm: Add nodes necessary for SMP boot   Stephen Boyd
• [PATCH 11/11] ARM: msm: Remove nr_cpus detection logic   Stephen Boyd
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Stephen Boyd
• [PATCH 09/11] ARM: msm: Add SMP support for KPSSv2   Stephen Boyd
• [PATCH 05/11] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Stephen Boyd
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Stephen Boyd
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Stephen Boyd
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Stephen Boyd
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH 05/11] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Stephen Boyd
• [PATCH] ARM: Save/Restore 64-bit TTBR registers on LPAE suspend/resume   Stephen Boyd
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Stephen Boyd
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Stephen Boyd
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Stephen Boyd
• [PATCH 2/2] arm64: perf: add support for percpu pmu interrupt   Stephen Boyd
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Stephen Boyd
• [PATCH 00/17] Convert ARM sched_clock users to sched_clock_register()   Stephen Boyd
• [PATCH 01/17] ARM: timer-sp: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 02/17] ARM: clps711x: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 03/17] ARM: davinci: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 04/17] ARM: imx: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 05/17] ARM: integrator: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 06/17] ARM: IXP4xx: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 07/17] ARM: mmp: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 08/17] ARM: msm: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 09/17] ARM: OMAP1: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 10/17] ARM: OMAP2+: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 11/17] ARM: pxa: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 12/17] ARM: sa1100: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 13/17] ARM: u300: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 14/17] ARM: iop: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 15/17] ARM: OMAP: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 16/17] ARM: orion: Switch to sched_clock_register()   Stephen Boyd
• [PATCH 17/17] ARM: versatile: Switch to sched_clock_register()   Stephen Boyd
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Stephen Boyd
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Stephen Boyd
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Stephen Boyd
• [PATCH 00/17] Convert ARM sched_clock users to sched_clock_register()   Stephen Boyd
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Stephen Boyd
• xen drivers fail to link on ARM with v3.12-9888-gf63c482   Josh Boyer
• xen drivers fail to link on ARM with v3.12-9888-gf63c482   Josh Boyer
• [PATCH] arm/xen: Export phys_to_mach to fix Xen module link errors   Josh Boyer
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Kevin Bracey
• [PATCH] dma: pl330: ensure DMA descriptors are zero-initialised   Jassi Brar
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Yadwinder Singh Brar
• [PATCH 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Yadwinder Singh Brar
• [PATCH 2/4] clk: clk-s2mps11: Add support for clocks in S5M8767 MFD   Yadwinder Singh Brar
• [RFC 0/4] Add basic support for ASV   Yadwinder Singh Brar
• [RFC 0/4] Add basic support for ASV   Yadwinder Singh Brar
• [RFC 0/4] Add basic support for ASV   Yadwinder Singh Brar
• [PATCH v3 0/2] clk/zynq: fclk-enable feature   Soren Brinkmann
• [PATCH v3 1/2] clk/zynq/clkc: Add 'fclk-enable' feature   Soren Brinkmann
• [PATCH v3 2/2] arm: dt: zynq: Add fclk-enable property to clkc node   Soren Brinkmann
• [PATCH 0/7] arm: zynq: cpufreq support   Soren Brinkmann
• [PATCH 1/7] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Soren Brinkmann
• [PATCH 2/7] arm: dt: zynq: Add 'cpus' node   Soren Brinkmann
• [PATCH 3/7] clocksource/cadence_ttc: Store timer frequency in driver data   Soren Brinkmann
• [PATCH 4/7] clocksource/cadence_ttc: Adjust interval in clock notifier   Soren Brinkmann
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Soren Brinkmann
• [PATCH 6/7] clocksource/cadence_ttc: Use only one counter   Soren Brinkmann
• [PATCH 7/7] arm: zynq: Add support for cpufreq   Soren Brinkmann
• [PATCH v2 0/9] arm: zynq: Add support for cpufreq   Soren Brinkmann
• [PATCH v2 1/9] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Soren Brinkmann
• [PATCH v2 2/9] arm: dt: zynq: Add 'cpus' node   Soren Brinkmann
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Soren Brinkmann
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Soren Brinkmann
• [PATCH v2 5/9] clocksource/cadence_ttc: Adjust interval in clock notifier   Soren Brinkmann
• [PATCH v2 6/9] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Soren Brinkmann
• [PATCH v2 7/9] clocksource/cadence_ttc: Use only one counter   Soren Brinkmann
• [PATCH v2 8/9] arm: zynq: Don't use arm_global_timer with cpufreq   Soren Brinkmann
• [PATCH v2 9/9] arm: zynq: Add support for cpufreq   Soren Brinkmann
• [PATCH v4 1/2] clk/zynq/clkc: Add 'fclk-enable' feature   Soren Brinkmann
• [PATCH v4 2/2] arm: dt: zynq: Add fclk-enable property to clkc node   Soren Brinkmann
• [PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code   Sören Brinkmann
• [PATCH v2 1/2] mmc: arasan: Add driver for Arasan SDHCI   Sören Brinkmann
• [PATCH 2/7] arm: dt: zynq: Add 'cpus' node   Sören Brinkmann
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Sören Brinkmann
• [PATCH 2/7] arm: dt: zynq: Add 'cpus' node   Sören Brinkmann
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Sören Brinkmann
• [PATCH 4/7] clocksource/cadence_ttc: Adjust interval in clock notifier   Sören Brinkmann
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Sören Brinkmann
• [PATCH v2 1/2] mmc: arasan: Add driver for Arasan SDHCI   Sören Brinkmann
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Sören Brinkmann
• [PATCH][RESEND 7/8] ASoC: davinci: use gen_pool_dma_alloc() in davinci-pcm.c   Mark Brown
• [PATCH][RESEND 8/8] ASoC: pxa: use gen_pool_dma_alloc() to allocate dma buffer   Mark Brown
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Mark Brown
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Mark Brown
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Mark Brown
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Mark Brown
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Mark Brown
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Mark Brown
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Mark Brown
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Mark Brown
• [PATCH 08/13] ASoC: generic-dmaengine-pcm: Clear slave_config memory   Mark Brown
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Mark Brown
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Mark Brown
• [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support   Mark Brown
• [PATCH] dmaengine: Add support for BCM2835.   Mark Brown
• [RFC] ASoC: Add support for BCM2835   Mark Brown
• [PATCH] dmaengine: Add support for BCM2835.   Mark Brown
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Mark Brown
• [PATCH] dmaengine: Add support for BCM2835.   Mark Brown
• [PATCH] dmaengine: Add support for BCM2835.   Mark Brown
• [PATCH 1/2] regulator: pfuze100: allow misprogrammed ID   Mark Brown
• [PATCH] spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()   Mark Brown
• [PATCH 14/31] ASoC: dmaengine: support deferred probe for DMA channels   Mark Brown
• [PATCH 15/31] ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config   Mark Brown
• [PATCH 16/31] ASoC: tegra: use reset framework   Mark Brown
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Mark Brown
• [PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()   Mark Brown
• [PATCH 19/31] ASoC: tegra: convert to standard DMA DT bindings   Mark Brown
• [PATCH 22/31] spi: tegra: use reset framework   Mark Brown
• [PATCH 23/31] spi: tegra: convert to standard DMA DT bindings   Mark Brown
• [PATCHv5] dmaengine: Add support for BCM2835   Mark Brown
• [PATCHv5] dmaengine: Add support for BCM2835   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• ARM topic: Is DT on ARM the solution, or is there something better?   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• ACPI vs DT at runtime   Mark Brown
• ACPI vs DT at runtime   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• ARM topic: Is DT on ARM the solution, or is there something better?   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• ARM topic: Is DT on ARM the solution, or is there something better?   Mark Brown
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Mark Brown
• [PATCH 16/31] ASoC: tegra: use reset framework   Mark Brown
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Mark Brown
• [PATCH 23/31] spi: tegra: convert to standard DMA DT bindings   Mark Brown
• ARM topic: Is DT on ARM the solution, or is there something better?   Mark Brown
• [PATCH 15/31] ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config   Mark Brown
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Mark Brown
• ARM topic: Is DT on ARM the solution, or is there something better?   Mark Brown
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Mark Brown
• [PATCH RFC 2/9] ASoC: davinci-evm: Add named clock reference to DT bindings   Mark Brown
• [PATCH RFC 5/9] ASoC: hdmi-codec: Add SNDRV_PCM_FMTBIT_32_LE playback format   Mark Brown
• [PATCH 1/2] ASoC: ab8500: Revert "ASoC: ab8500: Explicitly set I/O up"   Mark Brown
• [PATCH 08/10] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Mark Brown
• [PATCH 05/10] ASoC: Ux500: Match platform by device node when booting Device Tree   Mark Brown
• [PATCH 06/10] ASoC: ux500_pcm: Extend Device Tree support to deal with DMA data   Mark Brown
• [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Mark Brown
• [PATCH 09/10] ASoC: ux500_pcm: Take out pointless dev_dbg() call   Mark Brown
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Mark Brown
• [PATCH 08/10] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Mark Brown
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Mark Brown
• [PATCH v2 0/8] ARM: s3c64xx: Let amba-pl08x driver handle DMA   Mark Brown
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Mark Brown
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Mark Brown
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Mark Brown
• [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Mark Brown
• [PATCH 2/8] ASoC: fsl-ssi: Move sysfs stats to debugfs   Mark Brown
• [PATCH 1/8] ASoC: fsl-ssi: Move ac97 specific setup to seperate function   Mark Brown
• ACPI vs DT at runtime   Mark Brown
• ACPI vs DT at runtime   Mark Brown
• ACPI   Mark Brown
• [PATCH v3 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Mark Brown
• [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core   Mark Brown
• Patches from ARM folks solicited for the -stable tree   Mark Brown
• ACPI   Mark Brown
• [PATCHv4] ASoC: Add support for BCM2835   Mark Brown
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Mark Brown
• [PATCH 2/8] ASoC: fsl-ssi: Move sysfs stats to debugfs   Mark Brown
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Mark Brown
• [GIT PULL] s3c64xx dmaengine conversion   Mark Brown
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Mark Brown
• [PATCH 2/3] ARM: dts: Disable I2C controllers by default on Exynos5250   Mark Brown
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Mark Brown
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Mark Brown
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Mark Brown
• [PATCH RESEND] ASoC: clk: probe defer when clock not yet ready   Mark Brown
• [PATCHv5] ASoC: Add support for BCM2835   Mark Brown
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Mark Brown
• [PATCH v5 08/17] spi: mpc512x: adjust to OF based clock lookup   Mark Brown
• [PATCH 16/31] ASoC: tegra: use reset framework   Mark Brown
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Mark Brown
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Mark Brown
• [PATCH 16/31] ASoC: tegra: use reset framework   Mark Brown
• [Patch v2 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Mark Brown
• [PATCH 14/15] spi: sh-msiof: Enable driver compilation with COMPILE_TEST   Mark Brown
• [PATCH] ASoC: kirkwood: Fix invalid SPDIF format   Mark Brown
• [PATCH V2] ASoC: tegra: use reset framework   Mark Brown
• [PATCH] ASoC: kirkwood: Fix erroneous double output while playing   Mark Brown
• [PATCH] spi/pxa2xx: Restore private register bits.   Mark Brown
• [PATCH] ASoC: samsung: Initialize the dma_data for secondary dai   Mark Brown
• [PATCH] I2C: BCM2835: Linking platform nodes to adapter nodes   Mark Brown
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Mark Brown
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Mark Brown
• [PATCHv3 3/8] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags.   Eric Bénard
• [PATCHv3 1/8] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*   Eric Bénard
• [PATCHv9][ 1/3] Input: tsc2007: Add device tree support.   Eric Bénard
• [PATCHv9][ 3/3] ARM: dts: cpuimx35 Add touchscreen support.   Eric Bénard
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Marc C
• [PATCH 0/5] ARM: brcmstb: Add Broadcom STB SoC support   Marc C
• [PATCH 1/5] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc C
• [PATCH 2/5] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Marc C
• [PATCH 3/5] ARM: brcmstb: add misc. DT bindings for brcm,brcmstb   Marc C
• [PATCH 4/5] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15   Marc C
• [PATCH 5/5] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Marc C
• [PATCH RESEND 0/5] ARM: brcmstb: Add Broadcom STB SoC support   Marc C
• [PATCH RESEND 1/5] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc C
• [PATCH RESEND 2/5] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Marc C
• [PATCH RESEND 3/5] ARM: brcmstb: add misc. DT bindings for brcm, brcmstb   Marc C
• [PATCH RESEND 4/5] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15   Marc C
• [PATCH RESEND 5/5] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Marc C
• [PATCH RESEND 3/5] ARM: brcmstb: add misc. DT bindings for brcm, brcmstb   Marc C
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Marc C
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Marc C
• [PATCH RFC 00/10] ARM: STi: Add dwmac glue and reset controller   Giuseppe CAVALLARO
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Denis CIOCCA
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Denis CIOCCA
• [BUG?] ARM: mvebu: is second PCIe unit of Armada XP mv78230 x1 or x4?   Gregory CLEMENT
• [PATCH] clk: mvebu: staticize of_cpu_clk_setup   Gregory CLEMENT
• [PATCH] arm: mvebu: fix some sparse warnings   Gregory CLEMENT
• [PATCH v5 1/3] arm: mvebu: add missing of_node_put() to fix reference leak   Gregory CLEMENT
• [PATCH v5 2/3] bus: mvebu: add missing of_node_put() to fix reference leak   Gregory CLEMENT
• [PATCH v5 3/3] pinctrl: mvebu: Convert to use devm_ioremap_resource   Gregory CLEMENT
• [PATCH] clocksource: armada-370-xp: Enable timer divider only when needed   Gregory CLEMENT
• [PATCH] MAINTAINERS: drop discontinued mailing list   Olivier CLERGEAUD
• [PATCH v6 0/4] Add I2C support to ST SoCs   Maxime COQUELIN
• [PATCH v6 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH v6 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH v6 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   Maxime COQUELIN
• [PATCH v6 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   Maxime COQUELIN
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [PATCH v4 1/2] ARM: sun4i/sun7i: DT documentation for RTC driver   Carlo Caione
• [PATCH v4 2/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Jonathan Cameron
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Jonathan Cameron
• [RFC PATCH 1/3] iio: accel: Add device tree probing for STMicro accelerometers   Jonathan Cameron
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Jonathan Cameron
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Jonathan Cameron
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Jonathan Cameron
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Jonathan Cameron
• [PATCH 0/2] DT: correctly describe GIC400 virtualisation regions   Ian Campbell
• [PATCH 1/2] arm: correct GIC cpu interface range for Cortex A15/GIC 400   Ian Campbell
• [PATCH 2/2] arm: Support for platforms with split GIC cpu interface registers.   Ian Campbell
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Ian Campbell
• [PATCH v9 03/18] arm/xen,arm64/xen: introduce p2m   Ian Campbell
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Ian Campbell
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Ian Campbell
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• [Xen-devel] Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• [Xen-devel] Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Ian Campbell
• [PATCH 1/2] ARM: OMAP2+: remove unnecesary include in gpmc driver   Javier Martinez Canillas
• [PATCH 2/2] ARM: OMAP2+: move gpmc headers to include/linux/platform_data   Javier Martinez Canillas
• [PATCH 2/2] ARM: OMAP2+: move gpmc headers to include/linux/platform_data   Javier Martinez Canillas
• [PATCH 2/2] ARM: OMAP2+: move gpmc headers to include/linux/platform_data   Javier Martinez Canillas
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Javier Martinez Canillas
• [PATCH 00/11]: add remaining support for IGEP boards   Javier Martinez Canillas
• [PATCH 01/11] ARM: dts: omap3-igep: Fix bus-width for mmc1.   Javier Martinez Canillas
• [PATCH 02/11] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.   Javier Martinez Canillas
• [PATCH 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.   Javier Martinez Canillas
• [PATCH 04/11] ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices   Javier Martinez Canillas
• [PATCH 05/11] ARM: dts: omap3-igep0020: Add pinmuxing for DVI output   Javier Martinez Canillas
• [PATCH 06/11] ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display   Javier Martinez Canillas
• [PATCH 07/11] ARM: dts: AM33XX BASE0033: add pinmux and user led support.   Javier Martinez Canillas
• [PATCH 08/11] ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.   Javier Martinez Canillas
• [PATCH 09/11] ARM: dts: AM33XX IGEP0033: add USB support.   Javier Martinez Canillas
• [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus   Javier Martinez Canillas
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Javier Martinez Canillas
• [PATCH 00/11]: add remaining support for IGEP boards   Javier Martinez Canillas
• [PATCH 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.   Javier Martinez Canillas
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Javier Martinez Canillas
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Javier Martinez Canillas
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Javier Martinez Canillas
• [PATCH v2 00/11]: add remaining support for IGEP boards   Javier Martinez Canillas
• [PATCH v2 01/11] ARM: dts: omap3-igep: Fix bus-width for mmc1.   Javier Martinez Canillas
• [PATCH v2 02/11] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.   Javier Martinez Canillas
• [PATCH v2 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.   Javier Martinez Canillas
• [PATCH v2 04/11] ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices   Javier Martinez Canillas
• [PATCH v2 05/11] ARM: dts: omap3-igep0020: Add pinmuxing for DVI output   Javier Martinez Canillas
• [PATCH v2 06/11] ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display   Javier Martinez Canillas
• [PATCH v2 07/11] ARM: dts: AM33XX BASE0033: add pinmux and user led support.   Javier Martinez Canillas
• [PATCH v2 08/11] ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.   Javier Martinez Canillas
• [PATCH v2 09/11] ARM: dts: AM33XX IGEP0033: add USB support.   Javier Martinez Canillas
• [PATCH v2 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus   Javier Martinez Canillas
• [PATCH v2 11/11] ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi   Javier Martinez Canillas
• N900 board code in 3.14   Javier Martinez Canillas
• [PATCH v2 00/11]: add remaining support for IGEP boards   Javier Martinez Canillas
• [PATCH 01/12 diet] ARM: OMAP2+: Remove legacy omap3 board-*.c files and make mach-omap2 DT only for booting   Javier Martinez Canillas
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Javier Martinez Canillas
• [PATCH 0/3] ARM: OMAP2+: Remove remaining unused legacy code   Javier Martinez Canillas
• [PATCH 1/3] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support   Javier Martinez Canillas
• [PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC driver   Javier Martinez Canillas
• [PATCH 3/3] ARM: OMAP2+: Remove legacy board-flash.c   Javier Martinez Canillas
• [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE   Steve Capper
• [PATCH 1/3] ARM: mm: Rewire LPAE set_huge_pte_at   Steve Capper
• [PATCH 2/3] ARM: mm: Make LPAE huge page ptes NG by default   Steve Capper
• [PATCH 3/3] Revert "ARM: mm: correct pte_same behaviour for LPAE."   Steve Capper
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Steve Capper
• [PATCH] arm64: mm: Avoid set_pte_at with HugeTLB pages   Steve Capper
• [PATCHv4][ 1/6] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*   Denis Carikli
• [PATCHv4][ 2/6] dma: ipu: Add devicetree support.   Denis Carikli
• [PATCHv4][ 3/6] video: mx3fb: Add device tree suport.   Denis Carikli
• [PATCHv4][ 4/6] video: mx3fb: Introduce regulator support.   Denis Carikli
• [PATCHv4][ 5/6] ARM: dts: i.MX35: Add display support.   Denis Carikli
• [PATCHv4][ 6/6] ARM: dts: mbimxsd35 Add video and displays support.   Denis Carikli
• [PATCHv10][ 1/7] video: imxfb: Introduce regulator support.   Denis Carikli
• [PATCHv10][ 2/7] video: imxfb: Also add pwmr for the device tree.   Denis Carikli
• [PATCHv10][ 3/7] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Denis Carikli
• [PATCHv10][ 4/7] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Denis Carikli
• [PATCHv10][ 5/7] ARM: dts: imx25.dtsi: Permit to use the iomuxc in the dts.   Denis Carikli
• [PATCHv10][ 6/7] ARM i.MX25: build in pinctrl support.   Denis Carikli
• [PATCHv10][ 7/7] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv9][ 1/2] Input: tsc2007: Add device tree support.   Denis Carikli
• [PATCHv9][ 2/2] ARM: dts: cpuimx51 Add touchscreen support.   Denis Carikli
• [PATCHv11][ 1/7] video: imxfb: Introduce regulator support.   Denis Carikli
• [PATCHv11][ 2/7] video: imxfb: Also add pwmr for the device tree.   Denis Carikli
• [PATCHv11][ 3/7] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Denis Carikli
• [PATCHv11][ 4/7] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Denis Carikli
• [PATCHv11][ 5/7] ARM: dts: imx25.dtsi: Permit to use the iomuxc in the dts.   Denis Carikli
• [PATCHv11][ 6/7] ARM i.MX25: build in pinctrl support.   Denis Carikli
• [PATCHv11][ 7/7] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv12][ 1/8] video: imxfb: Introduce regulator support.   Denis Carikli
• [PATCHv12][ 2/8] video: imxfb: Also add pwmr for the device tree.   Denis Carikli
• [PATCHv12][ 3/8] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Denis Carikli
• [PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Denis Carikli
• [PATCHv12][ 5/8] ARM: dts: imx25: Add pinctrl functions and groups.   Denis Carikli
• [PATCHv12][ 6/8] ARM: dts: imx25.dtsi: label the iomuxc.   Denis Carikli
• [PATCHv12][ 7/8] ARM i.MX25: build in pinctrl support.   Denis Carikli
• [PATCHv12][ 8/8] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv7][ 1/3] DT: Add basic support for imx35-based devices.   Denis Carikli
• [PATCHv7][ 2/3] arm/dts: Add support for the cpuimx35 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv7][ 3/3] ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.   Denis Carikli
• [PATCHv5][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*   Denis Carikli
• [PATCHv5][ 2/5] video: mx3fb: Add device tree suport.   Denis Carikli
• [PATCHv5][ 3/5] video: mx3fb: Introduce regulator support.   Denis Carikli
• [PATCHv9][ 1/3] Input: tsc2007: Add device tree support.   Denis Carikli
• [PATCHv9][ 2/3] ARM: dts: cpuimx51 Add touchscreen support.   Denis Carikli
• [PATCHv9][ 3/3] ARM: dts: cpuimx35 Add touchscreen support.   Denis Carikli
• [PATCHv6][ 1/2] backlight: gpio_backlight: Use a default state enum.   Denis Carikli
• [PATCHv6][ 2/2] video: backlight: gpio-backlight: Add DT support.   Denis Carikli
• [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.   Denis Carikli
• [PATCHv8][ 2/5] ARM i.MX35: build in pinctrl support.   Denis Carikli
• [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.   Denis Carikli
• [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv8][ 5/5] ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.   Denis Carikli
• [PATCHv3 1/8] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*   Denis Carikli
• [PATCHv3 2/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Denis Carikli
• [PATCHv3 3/8] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags.   Denis Carikli
• [PATCHv3 4/8] staging: imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCHv4][ 1/7] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Denis Carikli
• [PATCHv4][ 2/7] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Denis Carikli
• [PATCHv4][ 3/7] staging: imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCHv4][ 4/7] staging: imx-drm: parallel display: add regulator support.   Denis Carikli
• [PATCHv4][ 5/7] ARM: dts: mbimx51sd: Add display support.   Denis Carikli
• [PATCHv4][ 6/7] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.   Denis Carikli
• [PATCHv4][ 7/7] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.   Denis Carikli
• [PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Denis Carikli
• [PATCHv9][ 1/3] Input: tsc2007: Add device tree support.   Denis Carikli
• [PATCH] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.   Denis Carikli
• [PATCH 1/3] pwm: Add mc13xxx pwm driver.   Denis Carikli
• [PATCH 2/3] ARM: dts: mbimxsd53 Add backlight and LCD regulator.   Denis Carikli
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Enable mc13xxx-pwm support.   Denis Carikli
• [PATCHv8][ 1/5] ASoC: eukrea-tlv320: Add DT support.   Denis Carikli
• [PATCHv8][ 2/5] ARM: dts: mbimxsd25: Add sound support.   Denis Carikli
• [PATCHv8][ 3/5] ARM: dts: mbimxsd35: Add sound support.   Denis Carikli
• [PATCHv8][ 4/5] ARM: dts: mbimxsd51: Add sound support.   Denis Carikli
• [PATCHv8][ 5/5] ARM: dts: mbimxsd53: Add sound support.   Denis Carikli
• [PATCH v2 0/6] ARM: brcmstb: Add Broadcom STB SoC support   Marc Carino
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc Carino
• [PATCH v2 2/6] ARM: do CPU-specific init for Broadcom Brahma15 cores   Marc Carino
• [PATCH v2 3/6] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Marc Carino
• [PATCH v2 4/6] ARM: brcmstb: add misc. DT bindings for brcm,brcmstb   Marc Carino
• [PATCH v2 5/6] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15   Marc Carino
• [PATCH v2 6/6] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Marc Carino
• [patch] clk: vexpress: NULL dereference on error path   Dan Carpenter
• mfd: ab8500-debug: Add wake-up info   Dan Carpenter
• [patch] [media] exynos4-is: cleanup a define   Dan Carpenter
• [patch] pinctrl: rockchip: testing the wrong variable   Dan Carpenter
• [patch] mfd: ab8500-debugfs: move dereference after check for NULL   Dan Carpenter
• [patch] pinctrl: rockchip: missing unlock on error in rockchip_set_pull()   Dan Carpenter
• [PATCH 05/11] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Josh Cartwright
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Yuvaraj Cd
• [PATCH] ARM: dts: Exynos5420: Add device nodes for HSI2C blocks   Naveen Krishna Ch
• [PATCH] ARM: dts: Exynos5420: Add device nodes for HSI2C blocks   Naveen Krishna Chatradhi
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Guangyu Chen
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Nicolin Chen
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Nicolin Chen
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Nicolin Chen
• [PATCH 0/8] Add and implement gen_pool_dma_alloc()   Nicolin Chen
• [PATCH 1/8] lib/genalloc: add a helper function for DMA buffer allocation   Nicolin Chen
• [PATCH 2/8] ARM: davinci: use gen_pool_dma_alloc() to sram.c   Nicolin Chen
• [PATCH 3/8] dma: mmp_tdma: use gen_pool_dma_alloc() to allocate descriptor   Nicolin Chen
• [PATCH 4/8] [media] coda: use gen_pool_dma_alloc() to allocate iram buffer   Nicolin Chen
• [PATCH 5/8] uio: uio_pruss: use gen_pool_dma_alloc() to allocate sram memory   Nicolin Chen
• [PATCH 6/8] ALSA: memalloc: use gen_pool_dma_alloc() to allocate iram buffer   Nicolin Chen
• [PATCH 7/8] ASoC: davinci: use gen_pool_dma_alloc() in davinci-pcm.c   Nicolin Chen
• [PATCH 8/8] ASoC: pxa: use gen_pool_dma_alloc() to allocate dma buffer   Nicolin Chen
• [PATCH][RESEND 0/8] Add and implement gen_pool_dma_alloc()   Nicolin Chen
• [PATCH][RESEND 1/8] lib/genalloc: add a helper function for DMA buffer allocation   Nicolin Chen
• [PATCH][RESEND 2/8] ARM: davinci: use gen_pool_dma_alloc() to sram.c   Nicolin Chen
• [PATCH][RESEND 3/8] dma: mmp_tdma: use gen_pool_dma_alloc() to allocate descriptor   Nicolin Chen
• [PATCH][RESEND 4/8] [media] coda: use gen_pool_dma_alloc() to allocate iram buffer   Nicolin Chen
• [PATCH][RESEND 5/8] uio: uio_pruss: use gen_pool_dma_alloc() to allocate sram memory   Nicolin Chen
• [PATCH][RESEND 6/8] ALSA: memalloc: use gen_pool_dma_alloc() to allocate iram buffer   Nicolin Chen
• [PATCH][RESEND 7/8] ASoC: davinci: use gen_pool_dma_alloc() in davinci-pcm.c   Nicolin Chen
• [PATCH][RESEND 8/8] ASoC: pxa: use gen_pool_dma_alloc() to allocate dma buffer   Nicolin Chen
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Nicolin Chen
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v4 1/4] dma: imx-sdma: Add sdma firmware version 2 support   Nicolin Chen
• [PATCH v4 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script   Nicolin Chen
• [PATCH v4 3/4] ASoC: fsl_ssi: Add dual fifo mode support   Nicolin Chen
• [PATCH v4 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi   Nicolin Chen
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v5 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v5 1/4] dma: imx-sdma: Add sdma firmware version 2 support   Nicolin Chen
• [PATCH v5 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script   Nicolin Chen
• [PATCH v5 3/4] ASoC: fsl_ssi: Add dual fifo mode support   Nicolin Chen
• [PATCH v5 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi   Nicolin Chen
• [PATCH v6 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v6 1/4] dma: imx-sdma: Add sdma firmware version 2 support   Nicolin Chen
• [PATCH v6 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script   Nicolin Chen
• [PATCH v6 3/4] ASoC: fsl_ssi: Add dual fifo mode support   Nicolin Chen
• [PATCH v6 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi   Nicolin Chen
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Nicolin Chen
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Nicolin Chen
• [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v7 1/4] dma: imx-sdma: Add sdma firmware version 2 support   Nicolin Chen
• [PATCH v7 2/4] dma: imx-sdma: Add new dma type for ssi dual fifo script   Nicolin Chen
• [PATCH v7 3/4] ASoC: fsl_ssi: Add dual fifo mode support   Nicolin Chen
• [PATCH v7 4/4] ARM: dts: imx: use dual-fifo sdma script for ssi   Nicolin Chen
• [PATCH 0/2] Add monaural audio support for fsl_ssi.c   Nicolin Chen
• [PATCH 1/2] ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000   Nicolin Chen
• [PATCH 2/2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Nicolin Chen
• [PATCH 0/2] Add monaural audio support for fsl_ssi.c   Nicolin Chen
• [PATCH 0/2] Add monaural audio support for fsl_ssi.c   Nicolin Chen
• [PATCH 1/2] ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000   Nicolin Chen
• [PATCH 2/2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Nicolin Chen
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Nicolin Chen
• [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi   Nicolin Chen
• [PATCH v3 00/11] Add power management support for MXS PHY   Peter Chen
• [PATCH v3 01/11] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v3 02/11] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v3 05/11] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v3 06/11] usb: phy: add notify suspend and resume callback   Peter Chen
• [PATCH v3 07/11] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v3 09/11] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v3 10/11] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v3 00/10] Add power management support for chipidea   Peter Chen
• [PATCH v3 01/10] usb: chipidea: Add power management support   Peter Chen
• [PATCH v3 02/10] usb: chipidea: imx: add power management support   Peter Chen
• [PATCH v3 03/10] usb: chipidea: add wakeup interrupt handler   Peter Chen
• [PATCH v3 04/10] usb: chipidea: usbmisc_imx: remove the controller's clock information   Peter Chen
• [PATCH v3 05/10] usb: chipidea: usbmisc_imx: add set_wakup API   Peter Chen
• [PATCH v3 06/10] usb: chipidea: imx: call set_wakeup when necessary   Peter Chen
• [PATCH v3 07/10] usb: chipidea: imx: Enable runtime pm support for imx6q   Peter Chen
• [PATCH v3 08/10] usb: chipidea: host: add quirk for ehci operation   Peter Chen
• [PATCH v3 09/10] usb: chipidea: host: add ehci quirk for imx controller   Peter Chen
• [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK   Peter Chen
• [PATCH v3 01/11] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v3 05/11] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Peter Chen
• [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Peter Chen
• [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Peter Chen
• [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Peter Chen
• [PATCH] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Peter Chen
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Peter Chen
• [PATCHv2] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Peter Chen
• [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Peter Chen
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Peter Chen
• [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Peter Chen
• [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Peter Chen
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   George Cherian
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   George Cherian
• [PATCHv3 0/3] ARM: dts: exynos: Add missing dt data to bring up kernel featurea   Chanwoo Choi
• [PATCHv3 1/3] ARM: dts: exynos4212: Add PMU dt data for pmu-irq   Chanwoo Choi
• [PATCHv3 2/3] ARM: dts: exynos4212: Add missing clock for multi core timer   Chanwoo Choi
• [PATCHv3 3/3] ARM: dts: exynos4x12: Add gps_alive power domain for exynos4x12   Chanwoo Choi
• [PATCH] hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)   Chanwoo Choi
• [GIT PULL] extcon fixes for 3.13-rc2   Chanwoo Choi
• [PATCH v4 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Chanwoo Choi
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [PATCH 1/4] mtd: spi-nor: move the SPI NOR commands to a new header file   Angus Clark
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Angus Clark
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [alsa-devel] [PATCH 08/13] ASoC: generic-dmaengine-pcm: Clear slave_config memory   Lars-Peter Clausen
• [PATCH] dmaengine: sirf: enable generic dt binding for dma channels   Lars-Peter Clausen
• [alsa-devel] [PATCHv2] dmaengine: Add support for BCM2835.   Lars-Peter Clausen
• [alsa-devel] [RFC] ASoC: Add support for BCM2835   Lars-Peter Clausen
• [alsa-devel] [PATCHv1 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Lars-Peter Clausen
• [alsa-devel] [PATCH 15/31] ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config   Lars-Peter Clausen
• [alsa-devel] [PATCH 14/31] ASoC: dmaengine: support deferred probe for DMA channels   Lars-Peter Clausen
• [alsa-devel] [RFCv2] ASoC: Add support for BCM2835   Lars-Peter Clausen
• [PATCHv3] ASoC: Add support for BCM2835   Lars-Peter Clausen
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Lars-Peter Clausen
• [PATCH 08/10] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [alsa-devel] KNOT / CONTINUOUS   Lars-Peter Clausen
• [alsa-devel] KNOT / CONTINUOUS   Lars-Peter Clausen
• [PATCH V2] media: i2c: Add ADV761X support   Lars-Peter Clausen
• [PATCH V2] media: i2c: Add ADV761X support   Lars-Peter Clausen
• [PATCH V2] media: i2c: Add ADV761X support   Lars-Peter Clausen
• [PATCH V2] media: i2c: Add ADV761X support   Lars-Peter Clausen
• omap2plus_defconfig build failure in v3.12   Richard Cochran
• ACPI vs DT at runtime   Richard Cochran
• ACPI vs DT at runtime   Richard Cochran
• ACPI vs DT at runtime   Richard Cochran
• [PATCH] clk: add flags to distinguish xtal clocks   Luca Coelho
• [PATCH] clk: add flags to distinguish xtal clocks   Luca Coelho
• [PATCH] clk: add flags to distinguish xtal clocks   Luca Coelho
• [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Alexei Colin
• [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Alexei Colin
• [PATCH v3 0/4] Exynos 5410 Dual cluster support   Alexei Colin
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Kees Cook
• [PATCH] ARM: make OABI default to off   Kees Cook
• [PATCH v2] ARM: make OABI default to off   Kees Cook
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Kees Cook
• [PATCH] seccomp: not compatible with ARM OABI   Kees Cook
• [PATCH] seccomp: not compatible with ARM OABI   Kees Cook
• [PATCH v2] seccomp: not compatible with ARM OABI   Kees Cook
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Kees Cook
• [PATCH v2] seccomp: not compatible with ARM OABI   Kees Cook
• [PATCH] use -fstack-protector-strong   Kees Cook
• [PATCH] use -fstack-protector-strong   Kees Cook
• [PATCH v2] use -fstack-protector-strong   Kees Cook
• [PATCH v2] use -fstack-protector-strong   Kees Cook
• [PATCH v2] use -fstack-protector-strong   Kees Cook
• [PATCH 2/2] ARM: kirkwood: enable HIGHMEM in defconfig   Jason Cooper
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Jason Cooper
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Jason Cooper
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Jason Cooper
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Jason Cooper
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Jason Cooper
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Jason Cooper
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Jason Cooper
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Jason Cooper
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Jason Cooper
• Raw notes from ARM summit.   Jason Cooper
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Jason Cooper
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Jason Cooper
• [PATCH] clk: mvebu: staticize of_cpu_clk_setup   Jason Cooper
• [PATCH v4 05/31] mtd: nand: pxa3xx: devicetree binding update   Jason Cooper
• [PATCH v4 05/31] mtd: nand: pxa3xx: devicetree binding update   Jason Cooper
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Jason Cooper
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Jason Cooper
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Jason Cooper
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Jason Cooper
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Cooper
• [RFC PATCH V2 0/2] Add 'make dtbs_install'   Jason Cooper
• [RFC PATCH V2 1/2] dtc: add 'compat' output option, prints board string   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 1/2] dtc: add 'compat' output option, prints board string   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 1/2] dtc: add 'compat' output option, prints board string   Jason Cooper
• [RFC PATCH V3 0/2] Add 'make dtbs_install'   Jason Cooper
• [RFC PATCH V3 1/2] scripts: dtc: build fdtget for extracting properties from dtbs   Jason Cooper
• [RFC PATCH V3 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V4] kbuild: dtbs_install: new make target   Jason Cooper
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V4] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V4] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH] ARM: mv78xx0: delete local <mach/gpio.h> header   Jason Cooper
• [PATCH V5] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V5] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V5] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V5] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver   Jason Cooper
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Jason Cooper
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Jason Cooper
• [PATCH] ARM: kirkwood: ReadyNAS Duo v2 .dts cleanup   Jason Cooper
• [PATCH] ARM: kirkwood: ReadyNAS Duo v2 .dts cleanup   Jason Cooper
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Jason Cooper
• [PATCH 1/3] ARM: Orion: Add missing includes   Jason Cooper
• [PATCH v3 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Jason Cooper
• [PATCH v2] ARM: kirkwood: Cleanup comments in Sheevaplug dts files   Jason Cooper
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Cooper
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Cooper
• [PATCH] ARM: orion5x: drop unused include from common.c   Jason Cooper
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Jason Cooper
• [PATCH] clk: mvebu: staticize of_cpu_clk_setup   Jason Cooper
• [PATCH] arm: mvebu: fix some sparse warnings   Jason Cooper
• [RESEND PATCH v2 1/3] irqchip: irq-dove: Add PMU interrupt controller.   Jason Cooper
• [PATCH v4 29/31] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Jason Cooper
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Jason Cooper
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Cooper
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Jason Cooper
• [PATCH] bus: mvebu-mbus: Remove deprecated comment   Jason Cooper
• [PATCH] ARM: orion5x: Fix typo in device_type property of phy node   Jason Cooper
• [PATCH] ARM: dove: Fix typo in device_type property of phy node   Jason Cooper
• [PATCH 1/2] ARM: kirkwood: provide pinctrl default to sdio nodes   Jason Cooper
• [PATCH 1/3] irqchip: orion: reverse irq handling priority   Jason Cooper
• [PATCH 2/3] mmc: mvsdio: workaround for spurious irqs   Jason Cooper
• [PATCH 3/3] mmc: mvsdio: silence card detect notice   Jason Cooper
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Jason Cooper
• [PATCHv2] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Jason Cooper
• [PATCHv2] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver   Jason Cooper
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Cooper
• [PATCH 1/4] irqchip: armada-370-xp: fix IPI race condition   Jason Cooper
• [PATCH 2/4] irqchip: armada-370-xp: fix MSI race condition   Jason Cooper
• [PATCH 3/4] ARM: mvebu: use the virtual CPU registers to access coherency registers   Jason Cooper
• [PATCH 4/4] ARM: mvebu: re-enable PCIe on Armada 370 DB   Jason Cooper
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Jason Cooper
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Jason Cooper
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Jason Cooper
• [RESEND PATCH v2 1/3] irqchip: irq-dove: Add PMU interrupt controller.   Jason Cooper
• [RESEND PATCH v2 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Jason Cooper
• [RESEND PATCH v2 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Jason Cooper
• [RESEND PATCH v2 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Jason Cooper
• [PATCH v3 2/2] PCI: mvebu - Support a bridge with no IO port window   Jason Cooper
• [PATCH] PCI: mvebu - The bridge secondary status register should be 0   Jason Cooper
• [PATCH] clocksource: armada-370-xp: Register sched_clock after the counter reset   Jason Cooper
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Jason Cooper
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Jason Cooper
• [PATCH v5 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime Coquelin
• [PATCH v6 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime Coquelin
• [PATCH v6 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime Coquelin
• [PATCH v10 4/7] ARM: tegra: add support for Trusted Foundations   Alex Courbot
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Alex Courbot
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Alex Courbot
• [PATCH] ARM: move firmware_ops to drivers/firmware   Alex Courbot
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Alex Courbot
• [PATCH] ARM: move firmware_ops to drivers/firmware   Alex Courbot
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Alex Courbot
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Alex Courbot
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH v10 1/7] ARM: add basic support for Trusted Foundations   Alexandre Courbot
• [PATCH v10 2/7] of: add vendor prefix for Trusted Logic Mobility   Alexandre Courbot
• [PATCH v10 3/7] of: add Trusted Foundations bindings   Alexandre Courbot
• [PATCH v10 4/7] ARM: tegra: add support for Trusted Foundations   Alexandre Courbot
• [PATCH v10 5/7] ARM: tegra: split setting of CPU reset handler   Alexandre Courbot
• [PATCH v10 6/7] ARM: tegra: set CPU reset handler with firmware op   Alexandre Courbot
• [PATCH v10 7/7] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH] ARM: tegra: init fuse before setting reset handler   Alexandre Courbot
• [PATCH] ARM: move firmware_ops to drivers/firmware   Alexandre Courbot
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH] ARM: move firmware_ops to drivers/firmware   Alexandre Courbot
• [PATCH] ARM: move firmware_ops to drivers/firmware   Alexandre Courbot
• [PATCH] clk: tegra: add FUSE clock device   Alexandre Courbot
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Alexandre Courbot
• [PATCH v11 0/7] ARM: support for the Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH v11 1/7] ARM: add basic support for Trusted Foundations   Alexandre Courbot
• [PATCH v11 2/7] of: add vendor prefix for Trusted Logic Mobility   Alexandre Courbot
• [PATCH v11 3/7] of: add Trusted Foundations bindings documentation   Alexandre Courbot
• [PATCH v11 4/7] ARM: tegra: add support for Trusted Foundations   Alexandre Courbot
• [PATCH v11 5/7] ARM: tegra: split setting of CPU reset handler   Alexandre Courbot
• [PATCH v11 6/7] ARM: tegra: set CPU reset handler using firmware   Alexandre Courbot
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH RFC] ARM/dts: am335x-boneblack: Add HDMI audio support   Benoit Cousson
• [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)   Benoit Cousson
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Christopher Covington
• [PATCH] ARM: move firmware_ops to drivers/firmware   Christopher Covington
• [PATCH V2 0/2] Exynos5250 SATA Support   Yuvaraj Kumar C D
• [PATCH V2 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar C D
• [PATCH V2 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar C D
• [PATCH V2] i2c: s3c2410 : Add polling mode support   Yuvaraj Kumar C D
• [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework   Tarek Dakhran
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Tarek Dakhran
• [PATCH v3 4/4] ARM: dts: Add initial device tree support for EXYNOS5410   Tarek Dakhran
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Tarek Dakhran
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Tarek Dakhran
• [PATCH v3 0/4] Exynos 5410 Dual cluster support   Tarek Dakhran
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Christoffer Dall
• [PATCH v3 2/2] arm/arm64: KVM: propagate caller endianness to the incomming vcpu   Christoffer Dall
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Christoffer Dall
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Christoffer Dall
• [GIT PULL] Third and final KVM/ARM updates for 3.13   Christoffer Dall
• [PATCH 1/4] ARM: KVM: Fix MPIDR computing to support virtual clusters   Christoffer Dall
• [PATCH 2/4] ARM: KVM: fix L2CTLR to be per-cluster   Christoffer Dall
• [PATCH 3/4] ARM: KVM: drop limitation to 4 CPU VMs   Christoffer Dall
• [PATCH 4/4] arm/arm64: KVM: PSCI: use MPIDR to identify a target CPU   Christoffer Dall
• [PATCH V4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Christoffer Dall
• [PATCH v2] arch: arm: uapi: be sure of "_UAPI" prefix for all guard macros   Christoffer Dall
• [PATCH 5/6] ARM: kvm: Use phys_addr_t instead of unsigned long in mm code   Christoffer Dall
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Christoffer Dall
• [PATCH 2/6] ARM: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Christoffer Dall
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Christoffer Dall
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Christoffer Dall
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Christoffer Dall
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Christoffer Dall
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Christoffer Dall
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Christoffer Dall
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Christoffer Dall
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Christoffer Dall
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Christoffer Dall
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Christoffer Dall
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Christoffer Dall
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Christoffer Dall
• [PATCH 0/2 v3] arm/arm64: KVM: arch_timer save/restore   Christoffer Dall
• [PATCH 1/2 v2] arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_init   Christoffer Dall
• [PATCH 2/2 v3 RESEND] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH v3 0/9] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH v3 1/9] ARM: KVM: Allow creating the VGIC after VCPUs   Christoffer Dall
• [PATCH v3 2/9] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH v3 3/9] KVM: arm-vgic: Set base addr through device API   Christoffer Dall
• [PATCH v3 4/9] irqchip: arm-gic: Define additional MMIO offsets and masks   Christoffer Dall
• [PATCH v3 5/9] KVM: arm-vgic: Make vgic mmio functions more generic   Christoffer Dall
• [PATCH v3 6/9] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH v3 7/9] KVM: arm-vgic: Support unqueueing of LRs to the dist   Christoffer Dall
• [PATCH v3 8/9] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Christoffer Dall
• [PATCH v3 9/9] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [GIT PULL] Fix vmalloc allocations for KVM/ARM   Christoffer Dall
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Christoffer Dall
• [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE   Christoffer Dall
• [PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Christoffer Dall
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Christoffer Dall
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Christoffer Dall
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Christoffer Dall
• [PATCH 0/3] arm/arm64: KVM: vgic: Various bugfixes and improvements   Christoffer Dall
• [PATCH 1/3] arm/arm64: KVM: vgic: Bugfix in handle_mmio_cfg_reg   Christoffer Dall
• [PATCH 2/3] arm/arm64: KVM: vgic: Bugfix in vgic_dispatch_sgi   Christoffer Dall
• [PATCH 3/3] arm/arm64: KVM: vgic: Use non-atomic bitops   Christoffer Dall
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Christoffer Dall
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Christoffer Dall
• [PATCH RFC v3 06/12] arm: kvm: implement CPU PM notifier   Christoffer Dall
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Magnus Damm
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Magnus Damm
• [PATCH 2/3] clk: shmobile: Add MSTP clock support   Magnus Damm
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Magnus Damm
• [PATCH] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Magnus Damm
• [PATCH] ARM: shmobile: Enable MTU2 on r7s72100   Magnus Damm
• [PATCH] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Magnus Damm
• [PATCH 2/3] ARM: shmobile: Remove non-existent LOCAL_TIMERS   Magnus Damm
• [PATCH 00/04] ARM: shmobile: KZM9D legacy board code removal   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Add shared EMEV2 code for ->init_machine()   Magnus Damm
• [PATCH 02/04] ARM: shmobile: Use ->init_late() in shared EMEV2 case   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code   Magnus Damm
• [PATCH 00/03] ARM: shmobile: r7s72100 Genmai DT reference and multiplatform   Magnus Damm
• [PATCH 01/03] ARM: shmobile: r7s72100 Genmai DT reference DTS bits   Magnus Damm
• [PATCH 02/03] ARM: shmobile: r7s72100 Genmai DT reference C bits   Magnus Damm
• [PATCH 03/03] ARM: shmobile: r7s72100 Genmai Multiplatform   Magnus Damm
• [PATCH/RFC] clk: shmobile: DT property SoC <-> CCF interface prototype   Magnus Damm
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code   Magnus Damm
• [PATCH] ARM: shmobile: Select USE_OF on EMEV2   Magnus Damm
• [PATCH] ARM: shmobile: Use ->init_late() on Lager   Magnus Damm
• [PATCH] ARM: shmobile: lager: mark GPIO keys as wake-up sources   Magnus Damm
• [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Magnus Damm
• [PATCH] ARM: shmobile: r7s72100 GPIO DT nodes for GPIO RZ   Magnus Damm
• [PATCH] ARM: shmobile: Enable GPIO LEDs on Genmai   Magnus Damm
• [PATCH] ARM: shmobile: r7s72100 GPIO DT nodes for GPIO RZ   Magnus Damm
• [PATCH] ARM: shmobile: lager: mark GPIO keys as wake-up sources   Magnus Damm
• [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Magnus Damm
• [PATCH] ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile   Magnus Damm
• [PATCH v2 0/7] Renesas R8A7790 Common Clock Framework support   Magnus Damm
• [PATCH v2] ARM: shmobile: Use ->init_late() on Lager   Magnus Damm
• [PATCH] ARM: shmobile: Use r8a7790 suffix for MMCIF compat string   Magnus Damm
• [PATCH] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Magnus Damm
• [PATCH] ARM: shmobile: Use ->init_late() on Koelsch   Magnus Damm
• [PATCH] ARM: shmobile: koelsch: mark GPIO keys as wake-up sources   Magnus Damm
• [PATCH] ARM: shmobile: Hook up SW30-SW36 on Koelsch   Magnus Damm
• [PATCH] ARM: shmobile: Use r8a7791 suffix for IRQC compat string   Magnus Damm
• [PATCH] ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS   Magnus Damm
• [PATCH] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Magnus Damm
• [PATCH] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Magnus Damm
• [PATCH] ARM: shmobile: Koelsch DT reference GPIO LED support   Magnus Damm
• [PATCH] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Magnus Damm
• [PATCH v2] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Magnus Damm
• [PATCH v2] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Magnus Damm
• [PATCH 00/04] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Magnus Damm
• [PATCH 02/04] ARM: shmobile: Genmai LED1 and LED2 support   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Genmai SCIF2 PINCTRL configuration   Magnus Damm
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Magnus Damm
• [PATCH 00/04] ARM: shmobile: Use SoC suffix for INTC compat string   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Use sh73a0 suffix for INTC compat string   Magnus Damm
• [PATCH 02/04] ARM: shmobile: Use r8a7740 suffix for INTC compat string   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Use r8a7778 suffix for INTC compat string   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Use r8a7779 suffix for INTC compat string   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Magnus Damm
• [PATCH 1/3] ARM: bcm: Remove non-existent GENERIC_TIME   Christian Daudt
• [RESEND PATCH v2 1/6] ARM: dts: Declare clocks as fixed on bcm11351   Christian Daudt
• [PATCH v2 0/5] Add-Broadcom-Kona-I2C-Support   Christian Daudt
• [PATCH] arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"   Will Deacon
• mm: get_user_pages_fast()   Will Deacon
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Will Deacon
• mm: get_user_pages_fast()   Will Deacon
• [PATCH] arm: add support for the Cortex-A12 processor   Will Deacon
• [PATCH v5 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Will Deacon
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Will Deacon
• [PATCH] arm64: enable EDAC on arm64   Will Deacon
• [PATCH 2/2] ARM: SMMU: return NULL on error in arm_smmu_iova_to_phys   Will Deacon
• [PATCH] ARM: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER   Will Deacon
• [PATCH] ARM: kexec: Use the right ISA for relocate_new_kernel   Will Deacon
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Will Deacon
• [PATCH v4 4/4] KGDB: make kgdb_breakpoint() as noinline   Will Deacon
• [PATCH v4 2/4] AArch64: KGDB: Add Basic KGDB support   Will Deacon
• [PATCH v4 3/4] AArch64: KGDB: Add step debugging support   Will Deacon
• [PATCH 0/4] arm64: Add audit support   Will Deacon
• [PATCH 2/4] arm64: Add audit support   Will Deacon
• [PATCH 3/4] arm64: audit: Add AArch32 support   Will Deacon
• [RFC v1 PATCH] ARM64: KGDB: Add FP/SIMD debug support   Will Deacon
• [PATCH 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCH RFC 3/6] arm64: Kprobes instruction simulation support   Will Deacon
• [PATCH RFC 4/6] arm64: Add kernel return probes support(kretprobes)   Will Deacon
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Will Deacon
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [GIT PULL] prefetch support for 3.13   Will Deacon
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Will Deacon
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Will Deacon
• [PATCH v4 3/4] AArch64: KGDB: Add step debugging support   Will Deacon
• arm/arm64 UEFI boot protocol   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Will Deacon
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Will Deacon
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Will Deacon
• [PATCH -next] iommu/arm-smmu: fix error return code in arm_smmu_device_dt_probe()   Will Deacon
• [PATCH -next] iommu/arm-smmu: fix potential NULL pointer dereference in arm_smmu_map()   Will Deacon
• [PATCH] arm: check stack pointer in get_wchan   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Will Deacon
• [PATCH 0/2] ARM64: perf: add support for the perf registers and dwarf unwinding   Will Deacon
• [GIT PULL] prefetch support for 3.13   Will Deacon
• Report from 2013 ARM kernel summit   Will Deacon
• Report from 2013 ARM kernel summit   Will Deacon
• [PATCH V4 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• Report from 2013 ARM kernel summit   Will Deacon
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Will Deacon
• Report from 2013 ARM kernel summit   Will Deacon
• [PATCH v2] arm64: enable EDAC on arm64   Will Deacon
• [PATCH V5 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Will Deacon
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Will Deacon
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Will Deacon
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Will Deacon
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Will Deacon
• [PATCH] dma: pl330: ensure DMA descriptors are zero-initialised   Will Deacon
• [PATCH 0/3] iommu: arm/smmu: fixes for 3.13   Will Deacon
• [PATCH 1/3] iommu/arm-smmu: use mutex instead of spinlock for locking page tables   Will Deacon
• [PATCH 2/3] iommu/arm-smmu: remove potential NULL dereference on mapping path   Will Deacon
• [PATCH 3/3] iommu/arm-smmu: fix error return code in arm_smmu_device_dt_probe()   Will Deacon
• [PATCH 0/4] iommu: arm/smmu: current updates for 3.14   Will Deacon
• [PATCH 1/4] iommu/arm-smmu: add devices attached to the SMMU to an IOMMU group   Will Deacon
• [PATCH 2/4] iommu/arm-smmu: use VA_BITS to determine arm64 virtual address space   Will Deacon
• [PATCH 3/4] iommu: add IOMMU_EXEC flag for safely allowing XN mappings   Will Deacon
• [PATCH 4/4] iommu/arm-smmu: add support for IOMMU_EXEC   Will Deacon
• [PATCH] dma: pl330: ensure DMA descriptors are zero-initialised   Will Deacon
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Will Deacon
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Will Deacon
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Will Deacon
• [PATCH V5 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kamil Debski
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kamil Debski
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Kamil Debski
• hi   Queada Deitcher
• [[PATCH v3]] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v5] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v5] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v6] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v2] videodev2: Set vb2_rect's width and height as unsigned   Ricardo Ribalda Delgado
• [PATCH v7] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [PATCH v8] videobuf2: Add missing lock held on vb2_fop_relase   Ricardo Ribalda Delgado
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Jean Delvare
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Ludovic Desroches
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Ludovic Desroches
• [PATCH V2 0/5] clk/power: add clock and power off driver for AS3722   Laxman Dewangan
• [PATCH V2 1/5] mfd: as3722: add clock driver as mfd-sub device   Laxman Dewangan
• [PATCH V2 2/5] mfd: as3722: add DT details for clock support of ams AS3722   Laxman Dewangan
• [PATCH V2 3/5] clk: as3722: add clock driver for ams AS3722   Laxman Dewangan
• [PATCH V2 4/5] mfd: AS3722: add dt node properties for system power controller   Laxman Dewangan
• [PATCH V2 5/5] power: reset: as3722: add power-off driver   Laxman Dewangan
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Marc Dietrich
• [PATCH 21/31] staging: nvec: use reset framework   Marc Dietrich
• [RFC] kprobes/kprobes-test fixes, .inst updates   Ben Dooks
• [PATCH 1/9] ARM: fix missed big-endian fix in traps.c   Ben Dooks
• [PATCH 2/9] ARM: kprobes: fix instruction fetch order with <asm/opcodes.h>   Ben Dooks
• [PATCH 3/9] ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses   Ben Dooks
• [PATCH 4/9] ARM: kprobes-test: Use <asm/opcodes.h> for ARM instruction building   Ben Dooks
• [PATCH 5/9] ARM: kprobes-test: Use <asm/opcodes.h> for thumb instruction nuilding   Ben Dooks
• [PATCH 6/9] ARM: kprobes-test: Workaround GAS .align bug   Ben Dooks
• [PATCH 7/9] ARM: kprobes-test: fix next_instruction()   Ben Dooks
• [PATCH 8/9] ARM: add test for as supporting '.inst'   Ben Dooks
• [PATCH 9/9] ARM: asm/opcodes.h: use ARM_HAVE_INST to use .inst to build instructions   Ben Dooks
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Ben Dooks
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Ben Dooks
• [PATCH 2/9] ARM: kprobes: fix instruction fetch order with <asm/opcodes.h>   Ben Dooks
• [PATCHv4 0/7] Unifying SMMU driver among Tegra SoCs   Hiroshi Doyu
• [PATCHv4 1/7] ARM: tegra: Create a DT header defining SWGROUP ID   Hiroshi Doyu
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Hiroshi Doyu
• [PATCHv4 3/7] iommu/tegra: smmu: Register IOMMU'able devices dynamically   Hiroshi Doyu
• [PATCHv4 4/7] iommu/tegra: smmu: Calculate ASID register offset by ID   Hiroshi Doyu
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Hiroshi Doyu
• [PATCHv4 6/7] iommu/tegra: smmu: Rename hwgrp -> swgroups   Hiroshi Doyu
• [PATCHv4 7/7] iommu/tegra: smmu: Allow duplicate ASID wirte   Hiroshi Doyu
• Report from 2013 ARM kernel summit   Hiroshi Doyu
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Hiroshi Doyu
• change_page_attr() implementation for ARM?   Hiroshi Doyu
• [PATCHv4 0/7] Unifying SMMU driver among Tegra SoCs   Hiroshi Doyu
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Hiroshi Doyu
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Hiroshi Doyu
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Hiroshi Doyu
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Hiroshi Doyu
• [PATCHv4 1/7] ARM: tegra: Create a DT header defining SWGROUP ID   Hiroshi Doyu
• [PATCHv5 0/9] Unifying Tegra IOMMU(SMMU) driver among Tegra SoCs   Hiroshi Doyu
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv5 3/9] ARM: tegra: create a DT header defining SWGROUP ID   Hiroshi Doyu
• [PATCHv5 4/9] iommu/tegra: smmu: register device to iommu dynamically   Hiroshi Doyu
• [PATCHv5 5/9] iommu/tegra: smmu: calculate ASID register offset by ID   Hiroshi Doyu
• [PATCHv5 6/9] iommu/tegra: smmu: get swgroups from DT "iommus="   Hiroshi Doyu
• [PATCHv5 7/9] iommu/tegra: smmu: allow duplicate ASID wirte   Hiroshi Doyu
• [PATCHv5 8/9] iommu/tegra: smmu: Rename hwgrp -> swgroups   Hiroshi Doyu
• [PATCHv5 9/9] [FOR TEST] ARM: dt: tegra30: add "iommus" binding   Hiroshi Doyu
• Report from 2013 ARM kernel summit   Hiroshi Doyu
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• Report from 2013 ARM kernel summit   Hiroshi Doyu
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• Report from 2013 ARM kernel summit   Hiroshi Doyu
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv5 4/9] iommu/tegra: smmu: register device to iommu dynamically   Hiroshi Doyu
• [PATCHv6 00/13] Unifying SMMU driver among Tegra SoCs   Hiroshi Doyu
• [PATCHv6 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv6 02/13] iommu/of: introduce a global iommu device list   Hiroshi Doyu
• [PATCHv6 03/13] iommu/of: check if dependee iommu is ready or not   Hiroshi Doyu
• [PATCHv6 04/13] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()   Hiroshi Doyu
• [PATCHv6 06/13] ARM: tegra: create a DT header defining SWGROUP ID   Hiroshi Doyu
• [PATCHv6 07/13] iommu/tegra: smmu: register device to iommu dynamically   Hiroshi Doyu
• [PATCHv6 08/13] iommu/tegra: smmu: calculate ASID register offset by ID   Hiroshi Doyu
• [PATCHv6 09/13] iommu/tegra: smmu: get swgroups from DT "iommus="   Hiroshi Doyu
• [PATCHv6 10/13] iommu/tegra: smmu: allow duplicate ASID wirte   Hiroshi Doyu
• [PATCHv6 11/13] iommu/tegra: smmu: Rename hwgrp -> swgroups   Hiroshi Doyu
• [PATCHv6 12/13] iommu/tegra: smmu: add SMMU to an global iommu list   Hiroshi Doyu
• [PATCHv6 13/13] [FOR TEST] ARM: dt: tegra30: add "iommus" binding   Hiroshi Doyu
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()   Hiroshi Doyu
• [RFC][PATCHv6++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Will Drewry
• [PATCH] seccomp: not compatible with ARM OABI   Will Drewry
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Eric Dumazet
• [BUG?] ARM: mvebu: is second PCIe unit of Armada XP mv78230 x1 or x4?   Arnaud Ebalard
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Arnaud Ebalard
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Arnaud Ebalard
• [PATCH 2/2] ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260   Arnaud Ebalard
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Arnaud Ebalard
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Arnaud Ebalard
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Arnaud Ebalard
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Arnaud Ebalard
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Arnaud Ebalard
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [REGRESSION,BISECTED] 3.11.7,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• Warning masked by BUG() when CONFIG_BUG is enabled   Arnaud Ebalard
• Warning masked by BUG() when CONFIG_BUG is enabled   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver   Arnaud Ebalard
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver   Arnaud Ebalard
• [PATCH] ARM: kirkwood: ReadyNAS Duo v2 .dts cleanup   Arnaud Ebalard
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Arnaud Ebalard
• [PATCH] ARM: kirkwood: ReadyNAS Duo v2 .dts cleanup   Arnaud Ebalard
• [PATCH 0/4] ARM: mvebu/kirkwood: NETGEAR ReadyNAS .dts files cleanup   Arnaud Ebalard
• [PATCH 1/4] kirkwood: NETGEAR ReadyNAS Duo v2 .dts file cleanup   Arnaud Ebalard
• [PATCH 2/4] ARM: mvebu: NETGEAR ReadyNAS 102 .dts file cleanup   Arnaud Ebalard
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Arnaud Ebalard
• [PATCH 4/4] ARM: NETGEAR ReadyNAS Duo v2 and RN102 .dts file whitespace cleanup   Arnaud Ebalard
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCHv2 0/4] ARM: mvebu/kirkwood: NETGEAR ReadyNAS .dts files cleanup   Arnaud Ebalard
• [PATCHv2 1/4] ARM: kirkwood: NETGEAR ReadyNAS Duo v2 .dts cleanup   Arnaud Ebalard
• [PATCHv2 2/4] ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanup   Arnaud Ebalard
• [PATCHv2 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts cleanup   Arnaud Ebalard
• [PATCHv2 4/4] ARM: Fix whitespaces in NETGEAR ReadyNAS .dts files   Arnaud Ebalard
• [PATCHv3] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCHv0] ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2   Arnaud Ebalard
• [PATCH] spi/pxa2xx: Restore private register bits.   Chew Chiau Ee
• [PATCH RESEND AGAIN] clk: clean up everything on debugfs error   Alex Elder
• [PATCH 1/4] ARM: sa1100: add irq handler to prepare MULTI_IRQ_HANDLER   Dmitry Eremin-Solenikov
• [PATCH 2/4] ARM: sa1100: enable MULTI_IRQ_HANDLER for all boards   Dmitry Eremin-Solenikov
• [PATCH 3/4] ARM: sa1100: drop entry-macro.S   Dmitry Eremin-Solenikov
• [PATCH 4/4] ARM: sa1100: switch to COMMON_CLK framework   Dmitry Eremin-Solenikov
• [PATCH 4/4] ARM: sa1100: switch to COMMON_CLK framework   Dmitry Eremin-Solenikov
• [PATCH 4/4] ARM: sa1100: switch to COMMON_CLK framework   Dmitry Eremin-Solenikov
• [PATCH 1/5] arm: sa1100: add cpu clock   Dmitry Eremin-Solenikov
• [PATCH 2/5] fbdev: sa1100fb: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH 3/5] pcmcia: sa1100: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH 4/5] arm: sa1100: add a clock alias for sa1111 pcmcia device   Dmitry Eremin-Solenikov
• [PATCH 5/5] pcmcia: sa1111: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH 1/5] arm: sa1100: add cpu clock   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 1/9] ARM: sa1100 collie: use gpio-charger instead of pda-power   Dmitry Eremin-Solenikov
• [PATCH 2/9] ARM: locomo: don't clobber chip data for chained irq   Dmitry Eremin-Solenikov
• [PATCH 3/9] ARM: sa1100: switch to MULTI_IRQ_HANDLER   Dmitry Eremin-Solenikov
• [PATCH 4/9] ARM: sa1100: convert gpio driver to be a proper platform driver   Dmitry Eremin-Solenikov
• [PATCH 5/9] ARM: sa1100: add platform functions to handle PWER settings   Dmitry Eremin-Solenikov
• [PATCH 6/9] ARM: sa1100: enable IRQ domains   Dmitry Eremin-Solenikov
• [PATCH 7/9] ARM: sa1100: move gpio irq handling to GPIO driver   Dmitry Eremin-Solenikov
• [PATCH 8/9] ARM: sa1100: move per-IRQ PWER settings to core code   Dmitry Eremin-Solenikov
• [PATCH 9/9] ARM: sa1100: refactor irq driver   Dmitry Eremin-Solenikov
• [PATCH] arm: pxa: tosa: fix keys mapping   Dmitry Eremin-Solenikov
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Dmitry Eremin-Solenikov
• [PATCH v2 0/5]   Dmitry Eremin-Solenikov
• [PATCH v2 1/5] arm: sa1100: add cpu clock   Dmitry Eremin-Solenikov
• [PATCH v2 2/5] fbdev: sa1100fb: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH v2 3/5] pcmcia: sa1100: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH v2 4/5] arm: sa1100: add a clock alias for sa1111 pcmcia device   Dmitry Eremin-Solenikov
• [PATCH v2 5/5] pcmcia: sa1111: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Dmitry Eremin-Solenikov
• [PATCH 0/2] pcmcia: small fixes for sa1111 machine code   Dmitry Eremin-Solenikov
• [PATCH 1/2] pcmcia: sa1111: pass sa1111_dev to badge4-specific code   Dmitry Eremin-Solenikov
• [PATCH 2/2] pcmcia: sa1111: pass sa1111_dev to jornada720-specific code   Dmitry Eremin-Solenikov
• [PATCH 0/6] arm: sa1100: refactor h3xxx GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 1/6] arm: sa1100: h3100: refactor LCD GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 2/6] arm: sa1100: h3600: refactor LCD GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 3/6] arm: sa1100: h3100: refactor IrDA GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 4/6] arm: sa1100: h3600: refactor IrDA GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 5/6] arm: sa1100: h3xxx: move serial port GPIO handling to common place   Dmitry Eremin-Solenikov
• [PATCH 6/6] arm: sa1100: h3xxx: drop hand-coded gpio_request_array analogue   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 7/9] ARM: sa1100: move gpio irq handling to GPIO driver   Dmitry Eremin-Solenikov
• [PATCH 7/9] ARM: sa1100: move gpio irq handling to GPIO driver   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Dmitry Eremin-Solenikov
• [PATCH 1/6] arm: sa1100: h3100: refactor LCD GPIO handling   Dmitry Eremin-Solenikov
• [PATCH 0/6] arm: sa1100: refactor h3xxx GPIO handling   Dmitry Eremin-Solenikov
• [PATCH v2 0/5]   Dmitry Eremin-Solenikov
• [PATCH 0/2] pcmcia: small fixes for sa1111 machine code   Dmitry Eremin-Solenikov
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Dmitry Eremin-Solenikov
• Donation of Allwinner-based CubieTruck to anyone interested in developing & upstreaming   Alexey Eromenko
• [PATCHv4][ 5/6] ARM: dts: i.MX35: Add display support.   Fabio Estevam
• [PATCH v4] imx-drm: Add mx6 hdmi transmitter support   Fabio Estevam
• [PATCH v4] imx-drm: Add mx6 hdmi transmitter support   Fabio Estevam
• imx-drm: possible circular locking dependency detected   Fabio Estevam
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Fabio Estevam
• [PATCH] ARM: dts: imx6q-udoo: Add Ethernet support   Fabio Estevam
• [PATCH] ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_HIGHMEM   Fabio Estevam
• [PATCHv3 3/8] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags.   Fabio Estevam
• [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx6q-udoo: Add USB host support   Fabio Estevam
• [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub   Fabio Estevam
• mx6qsabresd: Adding eMMC suport   Fabio Estevam
• [PATCH v2 1/6] mmc: sdhci: clear auto cmd setting bits for no data cmds   Fabio Estevam
• [PATCH] ARM: dts: imx6q-sabrelite: Place 'status' as the last node   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Provide a backlight regulator   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [PATCH] ARM: dts: imx6sabre: Pass reg property in lvds   Fabio Estevam
• [RFC] ARM: lib: delay-loop: Add align directive to fix BogoMIPS calculation   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Run I2C0 at 400kHz   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Fabio Estevam
• [RFC] ARM: lib: delay-loop: Add align directive to fix BogoMIPS calculation   Fabio Estevam
• [RFC] ARM: lib: delay-loop: Add align directive to fix BogoMIPS calculation   Fabio Estevam
• at91: ubi: UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -2   Bryan Evenson
• at91: ubi: UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -2   Bryan Evenson
• at91: ubi: UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -2   Bryan Evenson
• [PATCH 0/3] add support for i.MX6 based cpu modul dmo edmqmx6   Silvio F
• [PATCH 1/3] DT: sort vendor-prefixes.txt   Silvio F
• [PATCH 2/3] DT: Add Data Modul vendor prefix   Silvio F
• [PATCH 3/3] ARM: dts: imx6: Add support for imx6q dmo edmqmx6   Silvio F
• [PATCH v2] add support for i.MX6 based cpu modul dmo edmqmx6   Silvio F
• [PATCH 1/2] DT: Add Data Modul vendor prefix   Silvio F
• [PATCH 2/2] ARM: dts: imx6: Add support for imx6q dmo edmqmx6   Silvio F
• [PATCH v3] add support for i.MX6 based cpu modul dmo edmqmx6   Silvio F.
• [PATCH 1/2] DT: Add Data Modul vendor prefix   Silvio F.
• [PATCH 2/2] ARM: dts: imx6: Add support for imx6q dmo edmqmx6   Silvio F.
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Florian Fainelli
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Florian Fainelli
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Florian Fainelli
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Florian Fainelli
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Florian Fainelli
• [PATCH RFC v1 2/7] net: phy: provide phy_resume/phy_suspend helpers   Florian Fainelli
• [PATCH RFC v1 7/7] net: cpsw: resume/suspend PHY on port start/stop   Florian Fainelli
• [PATCH RFC v1 4/7] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Florian Fainelli
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   Florian Fainelli
• [PATCH RFC v1 4/7] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Florian Fainelli
• [PATCH 2/5] net: MOXA ART: connect to PHY and add ethtool support   Florian Fainelli
• [PATCH 2/5] net: MOXA ART: connect to PHY and add ethtool support   Florian Fainelli
• [PATCH v2 2/6] net: MOXA ART: connect to PHY   Florian Fainelli
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• SPARSE_IRQ on Kirkwood   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• address translation for PCIe-to-localbus bridge   Gerlando Falauto
• Ваши глаза вполне могут осязать отлично   Fendiks
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [RFC] Refactoring and moving dmtimer code   Joel Fernandes
• [PATCH] ARM: kernel: Detect DTB overwrite and error out   Joel Fernandes
• [PATCH] ARM: kernel: Detect DTB overwrite and error out   Joel Fernandes
• [PATCH 0/8] OMAP: timers: Preparation for migration to clocksource   Joel Fernandes
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Joel Fernandes
• [PATCH 2/8] rc: ir-rx51: Use clk API to get clock rate   Joel Fernandes
• [PATCH 3/8] rc: ir-rx51: Turn ON ir-rx51 as it should work for MULTIPLATFORM   Joel Fernandes
• [PATCH 4/8] ARM: OMAP4: timer: Remove non-DT code for TWD timer   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Joel Fernandes
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Joel Fernandes
• [PATCH 7/8] ARM: DTS: am33xx: Provide the ti,timer-parent property   Joel Fernandes
• [PATCH 8/8] ARM: AM33xx: Move to using omap_generic_timer_init for init_time   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Joel Fernandes
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Joel Fernandes
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Joel Fernandes
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Joel Fernandes
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Joel Fernandes
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Joel Fernandes
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Joel Fernandes
• [PATCH 0/7] AES/DES hwmod data and dmtimer fix   Joel Fernandes
• [PATCH 1/7] ARM: OMAP: hwmod: Add SYSC offsets for AES IP   Joel Fernandes
• [PATCH 2/7] ARM: DRA7xx: hwmod: Add hwmod data for DES IP   Joel Fernandes
• [PATCH 3/7] ARM: DRA7xx: hwmod: Add hwmod data for AES IP   Joel Fernandes
• [PATCH 4/7] ARM: OMAP4: hwmod: Add hwmod data for AES IP   Joel Fernandes
• [PATCH 5/7] ARM: OMAP4: hwmod: add hwmod data for DES IP   Joel Fernandes
• [PATCH 6/7] ARM: OMAP: Disable POSTED mode for errata i103 and i767   Joel Fernandes
• [PATCH 7/7] OMAP: AM33xx: hwmod: Correct AES module SYSC type   Joel Fernandes
• [PATCH 6/7] ARM: OMAP: Disable POSTED mode for errata i103 and i767   Joel Fernandes
• [PATCH 0/7] AES/DES hwmod data and dmtimer fix   Joel Fernandes
• [PATCH 5/7] ARM: OMAP4: hwmod: add hwmod data for DES IP   Joel Fernandes
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Joel Fernandes
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Joel Fernandes
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Joel Fernandes
• [PATCH] USB: ehci-atmel: add usb_clk for transition to CCF   Nicolas Ferre
• [PATCH v3 4/7] ARM: at91/dt: define sama5d3 clocks   Nicolas Ferre
• [PATCH 2/4] ALSA: atmel: remove dependency on <mach/gpio.h>   Nicolas Ferre
• [PATCH 3/4] pinctrl: at91: copy define to driver   Nicolas Ferre
• [PATCH 1/4] ARM/serial: at91: move machine quirk into machine   Nicolas Ferre
• [PATCH] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH] ARM/serial: at91: specify RTS in DT using gpio   Nicolas Ferre
• [PATCH] ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions   Nicolas Ferre
• [PATCH] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH] ARM/serial: at91: specify RTS in DT using gpio   Nicolas Ferre
• [PATCH v2] ARM/serial: at91: specify RTS in DT using gpio   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Nicolas Ferre
• [PATCH v2] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Nicolas Ferre
• [PATCH RESEND 0/7] crypto: at91/atmel: add Device Tree support   Nicolas Ferre
• [PATCH RESEND 1/7] ARM: at91/dt/trivial: use macro for AES irq type   Nicolas Ferre
• [PATCH RESEND 2/7] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix   Nicolas Ferre
• [PATCH RESEND 3/7] ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes   Nicolas Ferre
• [PATCH RESEND 4/7] crypto: atmel-aes - add support for Device Tree   Nicolas Ferre
• [PATCH RESEND 5/7] crypto: atmel-tdes - add support for Device Tree   Nicolas Ferre
• [PATCH RESEND 6/7] crypto: atmel-sha - add support for Device Tree   Nicolas Ferre
• [PATCH RESEND 7/7] crypto: atmel-sha - add sha information to the log   Nicolas Ferre
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Nicolas Ferre
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Nicolas Ferre
• [PATCH v3 0/2] ARM: at91: sama5d3: add sama5d36ek support   Nicolas Ferre
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Nicolas Ferre
• [PATCH] ARM: at91/dt: binding: add precision to AIC documentation   Nicolas Ferre
• [PATCH] ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation   Nicolas Ferre
• [PATCH v3 3/3] ARM: at91/rtc: disable interrupts at shutdown   Nicolas Ferre
• [PATCH v3 1/3] ARM: at91: fix hanged boot due to early rtc-interrupt   Nicolas Ferre
• [PATCH v3 2/3] ARM: at91: fix hanged boot due to early rtt-interrupt   Nicolas Ferre
• [GIT PULL] at91: non-critical fixes for 3.13 #1   Nicolas Ferre
• [PATCH] rtc: rtc-at91rm9200: Corrected alarm over day/month wrap:   Nicolas Ferre
• [PATCH] ARM: at91: remove redundant dependency   Nicolas Ferre
• [PATCH RESEND 0/7] crypto: at91/atmel: add Device Tree support   Nicolas Ferre
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Nicolas Ferre
• [PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board   Nicolas Ferre
• [PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA   Nicolas Ferre
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Nicolas Ferre
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Nicolas Ferre
• [PATCH 5/4] ARM: at91: don't use <mach/timex.h>   Nicolas Ferre
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Nicolas Ferre
• [PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA   Nicolas Ferre
• [PATCH] tty: atmel_serial: include <mach/hardware.h> explicitly   Nicolas Ferre
• [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework   Tomasz Figa
• [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tomasz Figa
• [PATCH v2 4/4] ARM: dts: Add initial device tree support for EXYNOS5410   Tomasz Figa
• [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tomasz Figa
• [PATCH v2 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Tomasz Figa
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Tomasz Figa
• [PATCHv9 01/43] clk: Add support for regmap register read/write   Tomasz Figa
• [PATCHv9 05/43] CLK: TI: add DT alias clock registration mechanism   Tomasz Figa
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Tomasz Figa
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Tomasz Figa
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Tomasz Figa
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Tomasz Figa
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Tomasz Figa
• [PATCH 01/11] devicetree: bindings: Document cpu enable-method for ARM CPUs   Tomasz Figa
• [PATCH] MAINTAINERS: Add entry for Samsung SoC clock drivers   Tomasz Figa
• [PATCH 0/4] Add support for clocks in S5M8767   Tomasz Figa
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Tomasz Figa
• [PATCH 2/4] dt: exynos5250: Enable support for generic USB 3.0 phy   Tomasz Figa
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Tomasz Figa
• [PATCH 1/3] clk: exynos5250: save/restore EPLL0 configuration   Tomasz Figa
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Tomasz Figa
• [PATCH 3/3] clk: exynos5250: register APLL rate table   Tomasz Figa
• [PATCH v3 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tomasz Figa
• [PATCH v3 2/4] clk: exynos5410: register clocks using common clock framework   Tomasz Figa
• [PATCH v3 4/4] ARM: dts: Add initial device tree support for EXYNOS5410   Tomasz Figa
• [PATCHv3 1/3] ARM: dts: exynos4212: Add PMU dt data for pmu-irq   Tomasz Figa
• [PATCHv3 2/3] ARM: dts: exynos4212: Add missing clock for multi core timer   Tomasz Figa
• [PATCHv3 3/3] ARM: dts: exynos4x12: Add gps_alive power domain for exynos4x12   Tomasz Figa
• [PATCH] hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)   Tomasz Figa
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Tomasz Figa
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Tomasz Figa
• [PATCH] clk: add specified-rate clock   Tomasz Figa
• [PATCH] clk: add specified-rate clock   Tomasz Figa
• [PATCH] dmaengine: Add support for BCM2835.   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [PATCH 1/2] dmaengine: add msm bam dma driver   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [RFC 0/4] Add basic support for ASV   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [PATCHv4] dmaengine: Add support for BCM2835   Tomasz Figa
• [RFC 0/4] Add basic support for ASV   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH v3 0/4] Exynos 5410 Dual cluster support   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH] ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Tomasz Figa
• [PATCH v2] watchdog: s3c2410_wdt: Only register for cpufreq on ARM_S3C24XX_CPUFREQ   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes   Tomasz Figa
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Tomasz Figa
• [PATCH V5 1/6] efi-stub.txt updates for ARM   Matt Fleming
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Matt Fleming
• [PATCH v3 0/3] (U)EFI runtime services for arm   Matt Fleming
• [PATCH] IMX6: Add static /8 prescaler to can_root clock configuration   Belser Florian
• [PATCH] IMX6 flexcan: Change serial clock_feq source from IPG clock to PER clock   Belser Florian
• [PATCH V5 0/6] Add ARM EFI stub   Roy Franz
• [PATCH V5 1/6] efi-stub.txt updates for ARM   Roy Franz
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Roy Franz
• [PATCH V5 3/6] Add strstr to compressed string.c for ARM.   Roy Franz
• [PATCH V5 4/6] Add EFI stub for ARM   Roy Franz
• [PATCH V5 5/6] Disable stack protection for decompressor/stub   Roy Franz
• [PATCH V5 6/6] Add config EFI_STUB for ARM to Kconfig   Roy Franz
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Kumar Gala
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Kumar Gala
• [PATCH 04/11] devicetree: bindings: Document qcom,saw2 node   Kumar Gala
• [PATCH 05/11] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Kumar Gala
• [PATCH 07/11] ARM: msm: Re-organize platsmp to make it extensible   Kumar Gala
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Kumar Gala
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Kumar Gala
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Kumar Gala
• [PATCH 03/11] devicetree: bindings: Document qcom,kpss-acc   Kumar Gala
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Kumar Gala
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Kumar Gala
• [PATCH v6 2/2] PWM: atmel-pwm: add device tree binding document   Kumar Gala
• [PATCHv3] dmaengine: Add support for BCM2835   Kumar Gala
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Kumar Gala
• [PATCH V5] kbuild: dtbs_install: new make target   Kumar Gala
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Kumar Gala
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Kumar Gala
• [BUG] PandaBoard hangs before starting init while booting v3.12   Ben Gamari
• [BUG] PandaBoard hangs before starting init while booting v3.12   Ben Gamari
• [BUG] PandaBoard hangs before starting init while booting v3.12   Ben Gamari
• cpufreq on PandaBoard   Ben Gamari
• cpufreq on PandaBoard   Ben Gamari
• cpufreq on PandaBoard   Ben Gamari
• [BUG] PandaBoard hangs before starting init while booting v3.12   Ben Gamari
• [BUG] PandaBoard hangs before starting init while booting v3.12   Ben Gamari
• [PATCH] arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"   Chen Gang
• [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation   Chen Gang
• [PATCH] arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"   Chen Gang
• [PATCH trivial] include: uapi: standard all files' macro prefix and suffix, excluding "linux/" sub-directory   Chen Gang
• [PATCH trivial] include: uapi: standard all files' macro prefix and suffix, excluding "linux/" sub-directory   Chen Gang
• [PATCH trivial] include: uapi: standard all files' macro prefix and suffix, excluding "linux/" sub-directory   Chen Gang
• [PATCH] arch: arm: uapi: be sure of "_UAPI" prefix for all guard macros   Chen Gang
• [Consult] Do we need related web site link in "./COPYING" file?   Chen Gang
• [PATCH] arch: arm: uapi: be sure of "_UAPI" prefix for all guard macros   Chen Gang
• [PATCH v2] arch: arm: uapi: be sure of "_UAPI" prefix for all guard macros   Chen Gang
• [PATCH v2] arch: arm: uapi: be sure of "_UAPI" prefix for all guard macros   Chen Gang
• [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation   Chen Gang
• [PATCH v3 0/2] mmc: dw_mmc: add dw_mmc-k3   Zhangfei Gao
• [PATCH 1/2] mmc: dw_mmc: add dw_mci_of_get_cd_gpio to handle cd pin   Zhangfei Gao
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH v2 08/27] mtd: nand: pxa3xx: Use chip->cmdfunc instead of the internal   Ezequiel Garcia
• [PATCH v2 07/27] mtd: nand: pxa3xx: Early variant detection   Ezequiel Garcia
• [PATCH v2 09/27] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count   Ezequiel Garcia
• [PATCH v2 10/27] mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize   Ezequiel Garcia
• [PATCH v2 11/27] mtd: nand: pxa3xx: Disable OOB on arbitrary length commands   Ezequiel Garcia
• [PATCH v2 12/27] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v3 00/28] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v3 01/28] clk: mvebu: Add Core Divider clock   Ezequiel Garcia
• [PATCH v3 02/28] ARM: mvebu: Add Core Divider clock device-tree binding   Ezequiel Garcia
• [PATCH v3 03/28] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP   Ezequiel Garcia
• [PATCH v3 04/28] ARM: mvebu: Add the core-divider clock to Armada 370/XP   Ezequiel Garcia
• [PATCH v3 05/28] mtd: nand: pxa3xx: Make config menu show supported platforms   Ezequiel Garcia
• [PATCH v3 06/28] mtd: nand: pxa3xx: Prevent sub-page writes   Ezequiel Garcia
• [PATCH v3 07/28] mtd: nand: pxa3xx: Early variant detection   Ezequiel Garcia
• [PATCH v3 08/28] mtd: nand: pxa3xx: Use chip->cmdfunc instead of the internal   Ezequiel Garcia
• [PATCH v3 09/28] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count   Ezequiel Garcia
• [PATCH v3 10/28] mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize   Ezequiel Garcia
• [PATCH v3 11/28] mtd: nand: pxa3xx: Add a nice comment to pxa3xx_set_datasize()   Ezequiel Garcia
• [PATCH v3 12/28] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v3 13/28] mtd: nand: pxa3xx: Add bad block handling   Ezequiel Garcia
• [PATCH v3 14/28] mtd: nand: pxa3xx: Add driver-specific ECC BCH support   Ezequiel Garcia
• [PATCH v3 15/28] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start   Ezequiel Garcia
• [PATCH v3 16/28] mtd: nand: pxa3xx: Add helper function to set page address   Ezequiel Garcia
• [PATCH v3 17/28] mtd: nand: pxa3xx: Remove READ0 switch/case falltrough   Ezequiel Garcia
• [PATCH v3 18/28] mtd: nand: pxa3xx: Split prepare_command_pool() in two stages   Ezequiel Garcia
• [PATCH v3 19/28] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()   Ezequiel Garcia
• [PATCH v3 20/28] mtd: nand: pxa3xx: Fix SEQIN column address set   Ezequiel Garcia
• [PATCH v3 21/28] mtd: nand: pxa3xx: Add a read/write buffers markers   Ezequiel Garcia
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v3 23/28] mtd: nand: pxa3xx: Add multiple chunk write support   Ezequiel Garcia
• [PATCH v3 24/28] mtd: nand: pxa3xx: Add ECC BCH correctable errors detection   Ezequiel Garcia
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Ezequiel Garcia
• [PATCH v3 26/28] ARM: mvebu: Enable NAND controller in Armada XP GP board   Ezequiel Garcia
• [PATCH v3 27/28] ARM: mvebu: Enable NAND controller in Armada 370 Mirabox   Ezequiel Garcia
• [PATCH v3 28/28] mtd: nand: pxa3xx: Add documentation about the controller   Ezequiel Garcia
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Ezequiel Garcia
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Ezequiel Garcia
• [PATCH v3 14/28] mtd: nand: pxa3xx: Add driver-specific ECC BCH support   Ezequiel Garcia
• [PATCH v3 13/28] mtd: nand: pxa3xx: Add bad block handling   Ezequiel Garcia
• [PATCH v3 12/28] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v3 12/28] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH 0/3] omap2: Assorted GPMC cleanups   Ezequiel Garcia
• [PATCH v4 00/31] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v4 01/31] clk: mvebu: Add Core Divider clock   Ezequiel Garcia
• [PATCH v4 02/31] ARM: mvebu: Add Core Divider clock device-tree binding   Ezequiel Garcia
• [PATCH v4 03/31] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP   Ezequiel Garcia
• [PATCH v4 04/31] ARM: mvebu: Add the core-divider clock to Armada 370/XP   Ezequiel Garcia
• [PATCH v4 05/31] mtd: nand: pxa3xx: devicetree binding update   Ezequiel Garcia
• [PATCH v4 06/31] mtd: nand: pxa3xx: Add documentation about the controller   Ezequiel Garcia
• [PATCH v4 07/31] mtd: nand: pxa3xx: Make config menu show supported platforms   Ezequiel Garcia
• [PATCH v4 08/31] mtd: nand: pxa3xx: Prevent sub-page writes   Ezequiel Garcia
• [PATCH v4 09/31] mtd: nand: pxa3xx: read_page() returns max_bitflips   Ezequiel Garcia
• [PATCH v4 10/31] mtd: nand: pxa3xx: Early variant detection   Ezequiel Garcia
• [PATCH v4 11/31] mtd: nand: pxa3xx: Use chip->cmdfunc instead of the internal   Ezequiel Garcia
• [PATCH v4 12/31] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count   Ezequiel Garcia
• [PATCH v4 13/31] mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize   Ezequiel Garcia
• [PATCH v4 14/31] mtd: nand: pxa3xx: Add a nice comment to pxa3xx_set_datasize()   Ezequiel Garcia
• [PATCH v4 15/31] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v4 16/31] mtd: nand: pxa3xx: Use waitfunc() to wait for the device to be ready   Ezequiel Garcia
• [PATCH v4 17/31] mtd: nand: pxa3xx: Add bad block handling   Ezequiel Garcia
• [PATCH v4 18/31] mtd: nand: pxa3xx: Add driver-specific ECC BCH support   Ezequiel Garcia
• [PATCH v4 19/31] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start   Ezequiel Garcia
• [PATCH v4 20/31] mtd: nand: pxa3xx: Add helper function to set page address   Ezequiel Garcia
• [PATCH v4 21/31] mtd: nand: pxa3xx: Remove READ0 switch/case falltrough   Ezequiel Garcia
• [PATCH v4 22/31] mtd: nand: pxa3xx: Split prepare_command_pool() in two stages   Ezequiel Garcia
• [PATCH v4 23/31] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()   Ezequiel Garcia
• [PATCH v4 24/31] mtd: nand: pxa3xx: Fix SEQIN column address set   Ezequiel Garcia
• [PATCH v4 25/31] mtd: nand: pxa3xx: Add a read/write buffers markers   Ezequiel Garcia
• [PATCH v4 26/31] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v4 27/31] mtd: nand: pxa3xx: Add multiple chunk write support   Ezequiel Garcia
• [PATCH v4 28/31] mtd: nand: pxa3xx: Add ECC BCH correctable errors detection   Ezequiel Garcia
• [PATCH v4 29/31] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Ezequiel Garcia
• [PATCH v4 30/31] ARM: mvebu: Enable NAND controller in Armada XP GP board   Ezequiel Garcia
• [PATCH v4 31/31] ARM: mvebu: Enable NAND controller in Armada 370 Mirabox   Ezequiel Garcia
• [PATCH v4 05/31] mtd: nand: pxa3xx: devicetree binding update   Ezequiel Garcia
• [PATCH v4 00/31] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v4 26/31] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v4 26/31] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v4 00/31] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH 2/2] ARM: OMAP2+: move gpmc headers to include/linux/platform_data   Ezequiel Garcia
• [PATCH] bus: mvebu-mbus: Remove deprecated comment   Ezequiel Garcia
• [PATCH v4 26/31] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v4 15/31] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v4 06/31] mtd: nand: pxa3xx: Add documentation about the controller   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 01/14] mtd: nand: pxa3xx: Use a completion to signal device ready   Ezequiel Garcia
• [PATCH v5 02/14] mtd: nand: pxa3xx: Use waitfunc() to wait for the device to be ready   Ezequiel Garcia
• [PATCH v5 03/14] mtd: nand: pxa3xx: Add bad block handling   Ezequiel Garcia
• [PATCH v5 04/14] mtd: nand: pxa3xx: Add driver-specific ECC BCH support   Ezequiel Garcia
• [PATCH v5 05/14] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start   Ezequiel Garcia
• [PATCH v5 06/14] mtd: nand: pxa3xx: Add helper function to set page address   Ezequiel Garcia
• [PATCH v5 07/14] mtd: nand: pxa3xx: Remove READ0 switch/case falltrough   Ezequiel Garcia
• [PATCH v5 08/14] mtd: nand: pxa3xx: Split prepare_command_pool() in two stages   Ezequiel Garcia
• [PATCH v5 09/14] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()   Ezequiel Garcia
• [PATCH v5 10/14] mtd: nand: pxa3xx: Fix SEQIN column address set   Ezequiel Garcia
• [PATCH v5 11/14] mtd: nand: pxa3xx: Add a read/write buffers markers   Ezequiel Garcia
• [PATCH v5 12/14] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v5 13/14] mtd: nand: pxa3xx: Add multiple chunk write support   Ezequiel Garcia
• [PATCH v5 14/14] mtd: nand: pxa3xx: Add ECC BCH correctable errors detection   Ezequiel Garcia
• [PATCH v5 03/14] mtd: nand: pxa3xx: Add bad block handling   Ezequiel Garcia
• [PATCH v5 09/14] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()   Ezequiel Garcia
• [PATCH v5 12/14] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v2 1/4] clk: mvebu: Add Core Divider clock   Ezequiel Garcia
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Ezequiel Garcia
• [PATCH v2 1/4] clk: mvebu: Add Core Divider clock   Ezequiel Garcia
• [RFC] mtd: gpmc: add BCH support for plain AM335x   Ezequiel Garcia
• [PATCH v4 0/4] pm: Add power off control   Ezequiel Garcia
• [PATCH] ARM: pxa: Move iotable mapping inside vmalloc region   Ezequiel Garcia
• [PATCH] ARM: pxa: Move iotable mapping inside vmalloc region   Ezequiel Garcia
• [PATCH] ARM: pxa: Move iotable mapping inside vmalloc region   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [rtc-linux] Re: [PATCH v4 0/4] pm: Add power off control   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH] clocksource: armada-370-xp: Register sched_clock after the counter reset   Ezequiel Garcia
• [PATCH] clocksource: armada-370-xp: Enable timer divider only when needed   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region   Ezequiel Garcia
• [RFC/PATCH] NAND bus-width detection extreme makeover   Ezequiel Garcia
• [RFC/PATCH] mtd: nand: auto-detection of NAND bus-width from ONFI param or nand_id[]   Ezequiel Garcia
• [PATCH/RESEND] clocksource: armada-370-xp: Enable timer divider only when needed   Ezequiel Garcia
• [RFC/PATCH] NAND bus-width detection extreme makeover   Ezequiel Garcia
• [RFC/PATCH v2] NAND bus-width detection extreme makeover   Ezequiel Garcia
• [RFC/PATCH v2] mtd: nand: Fix ONFI detection of 16-bit width NAND devices   Ezequiel Garcia
• ACPI   Matthew Garrett
• ACPI vs DT at runtime   Matthew Garrett
• ACPI vs DT at runtime   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• [PATCH] arm64: reboot driver missing dts entry and ACPI support for storm platform.   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• ACPI   Matthew Garrett
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Vivek Gautam
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Richard Genoud
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Richard Genoud
• [PATCH 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Richard Genoud
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Richard Genoud
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Richard Genoud
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   David Gibson
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   David Gibson
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   David Gibson
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   David Gibson
• [PATCH 1/1] arm mach-at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [PATCH 1/1] arm mach-at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Rodolfo Giometti
• [PATCH v3 1/9] irqchip: add DesignWare APB ICTL interrupt controller   Thomas Gleixner
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Thomas Gleixner
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Thomas Gleixner
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Thomas Gleixner
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Thomas Gleixner
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Thomas Gleixner
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Thomas Gleixner
• imx-drm: possible circular locking dependency detected   Christian Gmeiner
• imx-drm: possible circular locking dependency detected   Christian Gmeiner
• imx-drm: possible circular locking dependency detected   Christian Gmeiner
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   One Thousand Gnomes
• [PATCH v2 1/2] watchdog: bcm281xx: Watchdog Driver   One Thousand Gnomes
• [PATCH 16/51] DMA-API: ppc: vio.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Cedric Le Goater
• [PATCH] ARM: imx27-apf27dev: Add sdhci support   Gwenhael Goavec-Merou
• [PATCH] [ARM] imx27-apf27dev: fix display size   Gwenhael Goavec-Merou
• [PATCH 1/3] ARM: imx27: add pingroups for cspi, sdhc and framebuffer   Gwenhael Goavec-Merou
• [PATCH 2/3] ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1   Gwenhael Goavec-Merou
• [PATCH 3/3] ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer   Gwenhael Goavec-Merou
• [PATCHv2 1/3] ARM: imx27: add pingroups for cspi, sdhc and framebuffer   Gwenhael Goavec-Merou
• [PATCHv2 2/3] ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1   Gwenhael Goavec-Merou
• [PATCHv2 3/3] ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer   Gwenhael Goavec-Merou
• [PATCH 1/2] ARM: imx28: add apf28 specific initialization (macaddr)   Gwenhael Goavec-Merou
• [PATCH 2/2] ARM: apf28dev: dts: set gpio polarity for usb regulator and pinctrl for regulator gpio   Gwenhael Goavec-Merou
• [PATCH 1/3] ARM: imx27: add pwm0 pingrp   Gwenhael Goavec-Merou
• [PATCH 2/3] ARM: dts: apf27dev: Add pwm0 support   Gwenhael Goavec-Merou
• [PATCH 3/3] ARM: dts: imx27-apf27dev: Add pinctrl for cspi chip-select, sdhci2 card-detect, gpio-leds and gpio-keys   Gwenhael Goavec-Merou
• ACPI vs DT at runtime   David Goodenough
• ACPI vs DT at runtime   David Goodenough
• ACPI vs DT at runtime   David Goodenough
• [PATCH V4 0/6]USB: OHCI:Properly handle ohci_suspend()routine in bus glue   Majunath Goudar
• [PATCH V4 1/6] USB: OHCI: Properly handle OHCI controller suspend   Majunath Goudar
• [PATCH 2/6] USB: OHCI: Properly handle ohci-at91 suspend   Majunath Goudar
• [PATCH 3/6] USB: OHCI: Properly handle ohci-s3c2410 suspend   Majunath Goudar
• [PATCH 4/6] USB: OHCI: Properly handle ohci-da8xx suspend   Majunath Goudar
• [PATCH 5/6] USB: OHCI: Properly handle ohci-exynos suspend   Majunath Goudar
• [PATCH 6/6] USB: OHCI: Properly handle ohci-spear suspend   Majunath Goudar
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Julien Grall
• [Xen-devel] Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Julien Grall
• [Xen-devel] Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Julien Grall
• [Xen-devel] Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Julien Grall
• [PATCH] crypto: omap-sham - Only release DMA channel if successfully requested   Mark A. Greer
• Status of 1GHz support on am37xx   Mark A. Greer
• [PATCH] ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()   Igor Grinberg
• [PATCH] ARM: dts: Add initial support for cm-fx6.   Igor Grinberg
• [PATCH 1/2] dmaengine: add msm bam dma driver   Andy Gross
• [PATCH 1/2] dmaengine: add msm bam dma driver   Andy Gross
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Michael Grzeschik
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Michael Grzeschik
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Michael Grzeschik
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Michael Grzeschik
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Simon Guinot
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Simon Guinot
• a bug on NO_HZ_FULL_ALL   Vincent Guittot
• [PATCH v2] PCI: mvebu - Support a bridge with no IO port window   Jason Gunthorpe
• [PATCH v2] PCI: mvebu - Support a bridge with no IO port window   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• address translation for PCIe-to-localbus bridge   Jason Gunthorpe
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Jason Gunthorpe
• ACPI vs DT at runtime   Jason Gunthorpe
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Jason Gunthorpe
• ACPI   Jason Gunthorpe
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Gunthorpe
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Jason Gunthorpe
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Jason Gunthorpe
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Jason Gunthorpe
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Jason Gunthorpe
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Jason Gunthorpe
• [PATCH] PCI: mvebu - The bridge secondary status register should be 0   Jason Gunthorpe
• [PATCH] PCI: mvebu - Return a value for the INTERRUPT_LINE/PIN register   Jason Gunthorpe
• [PATCH RESEND v3 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Jason Gunthorpe
• [PATCH RESEND v3 2/2] PCI: mvebu - Support a bridge with no IO port window   Jason Gunthorpe
• [PATCH v3 2/2] PCI: mvebu - Support a bridge with no IO port window   Jason Gunthorpe
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Jason Gunthorpe
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Jason Gunthorpe
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Jason Gunthorpe
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Jason Gunthorpe
• UEFI Clock   Hanjun Guo
• [PATCH] ARM: imx: remove .map_io from imx6sl machine descriptor   Shawn Guo
• [PATCHv2 3/7] ARM: imx: add support code for IMX50 based machines   Shawn Guo
• [PATCH RFC] ARM: dts: imx6qdl: make pinctrl nodes board specific   Shawn Guo
• [PATCH] ARM: imx: remove mxc_iomux_v3_init() call from imx53_init_early()   Shawn Guo
• [PATCH 0/3] ARM: imx: pllv3 relock fixes   Shawn Guo
• [PATCH 1/3] ARM: imx: add sleep for pllv3 relock   Shawn Guo
• [PATCH 2/3] ARM: imx: pllv3 needs relock in .set_rate() call   Shawn Guo
• [PATCH 3/3] ARM: imx: set up pllv3 POWER and BYPASS sequentially   Shawn Guo
• [PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi   Shawn Guo
• [PATCH] ARM: imx6q: add missing sentinel to divider table   Shawn Guo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Shawn Guo
• [PATCHv2 7/7] ARM: dts: imx: add device tree support for Freescale imx50evk board   Shawn Guo
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Shawn Guo
• [PATCH] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Shawn Guo
• [PATCH] ARM: imx: drop support for irq priorisation   Shawn Guo
• [PATCH] ARM: imx: drop support for irq priorisation   Shawn Guo
• [PATCH 0/5] ARM: dts: imx: make pinctrl nodes board specific   Shawn Guo
• [PATCH 1/5] ARM: dts: imx6qdl: make pinctrl nodes board specific   Shawn Guo
• [PATCH 2/5] ARM: dts: imx6sl: make pinctrl nodes board specific   Shawn Guo
• [PATCH 3/5] ARM: dts: imx53: make pinctrl nodes board specific   Shawn Guo
• [PATCH 4/5] ARM: dts: imx51: make pinctrl nodes board specific   Shawn Guo
• [PATCH 5/5] ARM: dts: imx50: make pinctrl nodes board specific   Shawn Guo
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Shawn Guo
• [PATCHv9][ 5/6] ARM: dts: imx25.dtsi: Add some pinmux pins.   Shawn Guo
• [PATCH v2 0/5] mmc: sdhci-esdhc-imx: add runtime pm support   Shawn Guo
• [PATCH RFC] ARM: dts: imx6qdl: make pinctrl nodes board specific   Shawn Guo
• [PATCH v3 01/11] usb: phy-mxs: Add platform judgement code   Shawn Guo
• [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle   Shawn Guo
• [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy   Shawn Guo
• [PATCH v3 05/11] usb: phy-mxs: Add anatop regmap   Shawn Guo
• [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API   Shawn Guo
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Shawn Guo
• [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle   Shawn Guo
• [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy   Shawn Guo
• [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API   Shawn Guo
• [PATCHv10][ 4/7] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Shawn Guo
• [PATCH] ARM: dts: voipac: Improve fixed voltage regulator definition   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators   Shawn Guo
• [PATCH 2/2] ARM: dts: imx: use generic node name for fixed regulator   Shawn Guo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Shawn Guo
• [PATCH] ARM: dts: i.MX51: Fix OTG PHY clock   Shawn Guo
• [PATCH -next] ARM i.MX53: remove duplicated include from clk-imx51-imx53.c   Shawn Guo
• [PATCH v6 0/8] ARM: imx27 pinctrl   Shawn Guo
• [RFC PATCH 3/3] ARM: imx: cpuidle: Move the drivers to drivers/cpuidle   Shawn Guo
• [PATCH 2/2] ARM: dts: imx6: Add support for imx6q dmo edmqmx6   Shawn Guo
• [PATCH] ARM: mxs: add support for I2SE's duckbill series   Shawn Guo
• [RFC PATCH 1/3] ARM: imx: cpuidle: Convert imx5 driver to platform driver   Shawn Guo
• [RFC PATCH 2/3] ARM: imx: cpuidle: Convert imx6q driver to platform_driver   Shawn Guo
• [PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Shawn Guo
• [PATCHv12][ 5/8] ARM: dts: imx25: Add pinctrl functions and groups.   Shawn Guo
• [RFC PATCH 1/3] ARM: imx: cpuidle: Convert imx5 driver to platform driver   Shawn Guo
• [PATCH v3] add support for i.MX6 based cpu modul dmo edmqmx6   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators   Shawn Guo
• [PATCH] ARM: i.MX5x: Add SAHARA clock for i.MX5x CPUs   Shawn Guo
• [PATCHv7 1/3] ARM: imx: Add DMAMUX clock for Vybrid vf610 SoC   Shawn Guo
• [PATCHv7][ 1/3] DT: Add basic support for imx35-based devices.   Shawn Guo
• [PATCH 1/2] ARM: i.MX28: define ref_xtal frequency in DT   Shawn Guo
• [PATCH 1/2] ARM: i.MX28: define ref_xtal frequency in DT   Shawn Guo
• [PATCH v2] ARM: mxs: add support for I2SE's duckbill series   Shawn Guo
• [PATCH 1/2] ARM: dts: i.MX27: Add SSI nodes   Shawn Guo
• [PATCH 2/2] ARM: dts: imx27-phytec-phycore-som: Update FEC node   Shawn Guo
• [PATCH 1/5] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Shawn Guo
• [PATCH 1/5] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.13   Shawn Guo
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Shawn Guo
• [PATCH] ARM: imx27-apf27dev: Add sdhci support   Shawn Guo
• [PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Shawn Guo
• [PATCH v7 0/7] pinctrl: imx27: imx27 pincontrol driver   Shawn Guo
• [PATCH v7 3/7] ARM: dts: imx27 pinctrl   Shawn Guo
• [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.   Shawn Guo
• [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.   Shawn Guo
• [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.   Shawn Guo
• [PATCH] ARM: dts: imx6q-udoo: Add Ethernet support   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_HIGHMEM   Shawn Guo
• [PATCH 0/3] devicetree includes for i.MX5 clocks   Shawn Guo
• [PATCH 1/3] clk: imx5: introduce DT includes for clock provider   Shawn Guo
• [PATCH 2/3] ARM: imx53: use clock defines in DTS files   Shawn Guo
• [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub   Shawn Guo
• [PATCH 0/2] Add monaural audio support for fsl_ssi.c   Shawn Guo
• [PATCH 0/2] Add monaural audio support for fsl_ssi.c   Shawn Guo
• [PATCH v3 1/4] clk: imx5: introduce DT includes for clock provider   Shawn Guo
• [PATCH 1/2] ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000   Shawn Guo
• [PATCH] arm: imx: clk: correct arm clock usecount   Shawn Guo
• [PATCH] pinctrl: imx: drop redundant OF dependency   Shawn Guo
• [PATCH] ARM: imx: select PINCTRL at sub-architecure level   Shawn Guo
• [PATCH] ARM: imx: rename IMX6SL_CLK_CLK_END to IMX6SL_CLK_END   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: disable spdif "rxtx5" clock option   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: disable spdif "rxtx5" clock option   Shawn Guo
• [PATCH 0/8] imx6 dts cleanup series   Shawn Guo
• [RFC 4/9] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Shawn Guo
• [RFC 9/9] ARM: DTS: imx5* imx6*, use imx50-ssi   Shawn Guo
• [PATCH] ARM: dts: imx53: Add USB support for M53EVK   Shawn Guo
• [PATCH 3/5] ARM: imx: imx53: Add SATA PHY clock   Shawn Guo
• [PATCH 4/5] ARM: dts: imx53: Add AHCI SATA binding   Shawn Guo
• [PATCH 5/5] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Shawn Guo
• [PATCH 1/3] ARM: dts: imx53: Fix display pinmux for M53EVK   Shawn Guo
• [PATCH V2 1/5] ahci: imx: Pull out the clock enable/disable calls   Shawn Guo
• [PATCH V3 1/5] ahci: imx: Pull out the clock enable/disable calls   Shawn Guo
• [PATCH V3 2/5] ahci: imx: Add i.MX53 support   Shawn Guo
• [PATCH v7 0/7] pinctrl: imx27: imx27 pincontrol driver   Shawn Guo
• [PATCH] ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree   Shawn Guo
• [PATCH] ARM: cfa10036: Add dr_mode and phy_type properties to the DT   Shawn Guo
• [PATCH 1/2] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.13, part 2   Shawn Guo
• [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver   Shawn Guo
• [PATCH 3/8] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Shawn Guo
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Shawn Guo
• [PATCH V4 2/6] ahci: imx: Pull out the clock enable/disable calls   Shawn Guo
• [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabrelite: Place 'status' as the last node   Shawn Guo
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Shawn Guo
• [PATCH V2 1/1] ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups   Shawn Guo
• [PATCH V2 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Shawn Guo
• [PATCH V2 4/6] ARM: imx: imx53: Add SATA PHY clock   Shawn Guo
• [PATCH V2 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Shawn Guo
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Shawn Guo
• [PATCH] ARM: i.MX6q: fix the wrong parent of can_root clock   Shawn Guo
• [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver   Shawn Guo
• [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver   Shawn Guo
• [PATCH] [ARM] imx27-apf27dev: fix display size   Shawn Guo
• [PATCH v2] ARM i.MX5: fix "shift" value for lp_apm_sel on i.MX50 and i.MX53   Shawn Guo
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH v2 3/9] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Shawn Guo
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Shawn Guo
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH] ARM: dts: imx28-evk: Run I2C0 at 400kHz   Shawn Guo
• [PATCH] ARM: dts: imx6sabre: Pass reg property in lvds   Shawn Guo
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Shawn Guo
• [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Shawn Guo
• [PATCH 1/3] ARM: imx27: add pingroups for cspi, sdhc and framebuffer   Shawn Guo
• [PATCH 0/2] ARM: i.MX53: voipac-dmm-668 Devicetree   Shawn Guo
• [PATCH] ARM: dts: imx6sabre: Pass reg property in lvds   Shawn Guo
• [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1   Shawn Guo
• [PATCH] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.   Shawn Guo
• [PATCH 03/10] ARM: imx6q: select ARM and PL310 errata   Shawn Guo
• [PATCHv2 1/3] ARM: imx27: add pingroups for cspi, sdhc and framebuffer   Shawn Guo
• [PATCH] IMX6 flexcan: Change serial clock_feq source from IPG clock to PER clock   Shawn Guo
• [PATCH 1/4] mtd: spi-nor: move the SPI NOR commands to a new header file   Gupta, Pekon
• [PATCH 3/4] mtd: spi-nor: add the framework for SPI NOR   Gupta, Pekon
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Gupta, Pekon
• [RFC/PATCH] NAND bus-width detection extreme makeover   Gupta, Pekon
• [PATCH 04/11] MIPS: use the common machine reset handling   Vineet Gupta
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Harro Haan
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Harro Haan
• [PATCH 4/7] PCI: imx6: Split away the PHY reset   Harro Haan
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Harro Haan
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [RFC 0/4] Add basic support for ASV   MyungJoo Ham
• [PATCHv4] video: backlight: gpio-backlight: Add DT support.   Jingoo Han
• [PATCH] ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameter   Jingoo Han
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Jingoo Han
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Jingoo Han
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Jingoo Han
• [PATCH] MAINTAINERS: Add entry for Samsung SoC clock drivers   Jingoo Han
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Jingoo Han
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Jingoo Han
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Jingoo Han
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Jingoo Han
• [RFC PATCH 4/4] mm/vmalloc.c: Treat the entire kernel virtual space as vmalloc   Dave Hansen
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Dave Hansen
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Dave Hansen
• [PATCH v2 5/5] mmc: sdhci-esdhc-imx: add runtime pm support   Ulf Hansson
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Ulf Hansson
• [PATCH] MAINTAINERS: Add maintainer for the ARM Ux500 clock driver   Ulf Hansson
• [PATCH 1/2] Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings"   Ulf Hansson
• [PATCH 2/2] Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots"   Ulf Hansson
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Ulf Hansson
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 1/5] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks   Ulf Hansson
• [PATCH 2/5] PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM   Ulf Hansson
• [PATCH 3/5] PM / Runtime: Add second macro for definition of runtime PM callbacks   Ulf Hansson
• [PATCH 4/5] PM / Sleep: Add macro to define common late/early system PM callbacks   Ulf Hansson
• [PATCH 5/5] drm/exynos: Convert to suspend_late/resume_early callbacks for fimc   Ulf Hansson
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 1/2] regulator: pfuze100: allow misprogrammed ID   Tim Harvey
• [PATCH] ARM: pcm037: convert custom GPIO-based power function to a regulator   Sascha Hauer
• [PATCH] ARM: imx: drop support for irq priorisation   Sascha Hauer
• [PATCH] ARM: imx: removed unused MACH_MXLADS Kconfig parameter   Sascha Hauer
• [PATCH] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Sascha Hauer
• [PATCHv9][ 4/6] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Sascha Hauer
• [PATCHv4][ 2/6] dma: ipu: Add devicetree support.   Sascha Hauer
• [RFC PATCH 3/3] ARM: imx: cpuidle: Move the drivers to drivers/cpuidle   Sascha Hauer
• [PATCH 2/4] ARM: netx: stop using mach/timex.h   Sascha Hauer
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Gururaja Hebbar
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Gururaja Hebbar
• [PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region   David Heidelberger
• [PATCH] ARM: mxs: add support for I2SE's duckbill series   Michael Heimpold
• [PATCH v2] ARM: mxs: add support for I2SE's duckbill series   Michael Heimpold
• [PATCH v2] PCI: mvebu - Support a bridge with no IO port window   Bjorn Helgaas
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Bjorn Helgaas
• [PATCH 08/31] pci: tegra: use reset framework   Bjorn Helgaas
• [PATCH 10/31] ARM: tegra: pass reset to tegra_powergate_sequence_power_up()   Bjorn Helgaas
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Bjorn Helgaas
• [PATCH] PCI: mvebu - The bridge secondary status register should be 0   Bjorn Helgaas
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Stephen Hemminger
• [3.5.y.z extended stable] Patch "clockevents: Sanitize ticks to nsec conversion" has been added to staging queue   Luis Henriques
• [3.5.y.z extended stable] Patch "scripts/kallsyms: filter symbols not in kernel address space" has been added to staging queue   Luis Henriques
• [PATCH 3.5 21/78] clockevents: Sanitize ticks to nsec conversion   Luis Henriques
• [PATCH 3.5 34/78] scripts/kallsyms: filter symbols not in kernel address space   Luis Henriques
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Tejun Heo
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Tejun Heo
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Tejun Heo
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Tejun Heo
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Tejun Heo
• [PATCH V3 1/3] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Tejun Heo
• [PATCH 0/2] Revert support for reserved memory regions defined in device tree   Benjamin Herrenschmidt
• [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Rob Herring
• [PATCH 1/2] arm: correct GIC cpu interface range for Cortex A15/GIC 400   Rob Herring
• [PATCH 01/11] devicetree: bindings: Document cpu enable-method for ARM CPUs   Rob Herring
• [PATCH 02/11] devicetree: bindings: Document Qualcomm cpus and enable-method   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH] gpio: pl061: don't depend on CONFIG_ARM   Rob Herring
• [PATCH] arm64: enable EDAC on arm64   Rob Herring
• [PATCH] arm64: enable EDAC on arm64   Rob Herring
• undocumented bindings in linux-next   Rob Herring
• [PATCH] arm64: enable EDAC on arm64   Rob Herring
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Rob Herring
• [PATCH] ARM: rename ioremap_cached to ioremap_cache   Rob Herring
• [PATCH 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Rob Herring
• [PATCH 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Rob Herring
• [PATCH 1/7] ARM: sa1100: switch to MULTI_IRQ_HANDLER   Rob Herring
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Rob Herring
• ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Rob Herring
• [Xen-devel] [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH 2/2] ARM: highbank: only select errata 764369 if SMP   Rob Herring
• [PATCH 2/2] ARM: highbank: only select errata 764369 if SMP   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH v5 5/7] gpio: davinci: add OF support   Rob Herring
• ACPI vs DT at runtime   Rob Herring
• Report from 2013 ARM kernel summit   Rob Herring
• [PATCH V2 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Rob Herring
• Report from 2013 ARM kernel summit   Rob Herring
• Report from 2013 ARM kernel summit   Rob Herring
• Report from 2013 ARM kernel summit   Rob Herring
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Rob Herring
• ARM network performance and dma_mask   Rob Herring
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Rob Herring
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Rob Herring
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Rob Herring
• [PATCH v2] arm64: enable EDAC on arm64   Rob Herring
• [PATCH] arm64: make default NR_CPUS 8   Rob Herring
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Rob Herring
• [PATCH 5/8] ARM: OMAP2+: timer: Introduce OF-friendly clocksource/clockevent system timers   Rob Herring
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Rob Herring
• [PATCH v2] arm64: enable EDAC on arm64   Rob Herring
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Rob Herring
• STOP THE MADNESS   Rob Herring
• STOP THE MADNESS   Rob Herring
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Sebastian Hesselbarth
• [PATCH v3 0/9] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v3 1/9] irqchip: add DesignWare APB ICTL interrupt controller   Sebastian Hesselbarth
• [PATCH v3 2/9] MAINTAINERS: add ARM Marvell Berlin SoC   Sebastian Hesselbarth
• [PATCH v3 3/9] ARM: l2x0: add Marvell Tauros3 support   Sebastian Hesselbarth
• [PATCH v3 4/9] ARM: add Marvell Berlin SoC familiy to Marvell doc   Sebastian Hesselbarth
• [PATCH v3 5/9] ARM: add Marvell Berlin SoCs to multi_v7_defconfig   Sebastian Hesselbarth
• [PATCH v3 6/9] ARM: add Marvell Berlin UART0 lowlevel debug   Sebastian Hesselbarth
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Sebastian Hesselbarth
• [PATCH v3 8/9] ARM: add Armada 1500-mini and Chromecast device tree files   Sebastian Hesselbarth
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode   Sebastian Hesselbarth
• [PATCH v3 4/9] ARM: add Marvell Berlin SoC familiy to Marvell doc   Sebastian Hesselbarth
• [PATCH v3 8/9] ARM: add Armada 1500-mini and Chromecast device tree files   Sebastian Hesselbarth
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH] ARM: l2x0: add prefetch and power ctrl registers configuration support   Sebastian Hesselbarth
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Sebastian Hesselbarth
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Sebastian Hesselbarth
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Sebastian Hesselbarth
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer   Sebastian Hesselbarth
• [PATCHv2] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Sebastian Hesselbarth
• [PATCH 1/2] ARM: kirkwood: provide pinctrl default to sdio nodes   Sebastian Hesselbarth
• [PATCH 2/2] ARM: kirkwood: mark guruplug sdio as non-removable   Sebastian Hesselbarth
• [PATCH 0/3] Orion irqchip and Kirkwood SDIO   Sebastian Hesselbarth
• [PATCH 1/3] irqchip: orion: reverse irq handling priority   Sebastian Hesselbarth
• [PATCH 2/3] mmc: mvsdio: workaround for spurious irqs   Sebastian Hesselbarth
• [PATCH 3/3] mmc: mvsdio: silence card detect notice   Sebastian Hesselbarth
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Sebastian Hesselbarth
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH RFC v1 1/7] net: phy: marvell: provide genphy suspend/resume   Sebastian Hesselbarth
• [PATCH RFC v1 2/7] net: phy: provide phy_resume/phy_suspend helpers   Sebastian Hesselbarth
• [PATCH RFC v1 3/7] net: phy: resume/suspend PHYs on attach/detach   Sebastian Hesselbarth
• [PATCH RFC v1 4/7] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Sebastian Hesselbarth
• [PATCH RFC v1 5/7] net: mv643xx_eth: resume/suspend PHY on port start/stop   Sebastian Hesselbarth
• [PATCH RFC v1 6/7] net: mvneta: resume/suspend PHY on port start/stop   Sebastian Hesselbarth
• [PATCH RFC v1 7/7] net: cpsw: resume/suspend PHY on port start/stop   Sebastian Hesselbarth
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH RFC v1 7/7] net: cpsw: resume/suspend PHY on port start/stop   Sebastian Hesselbarth
• [PATCH RFC v1 4/7] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Sebastian Hesselbarth
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH RFC v1 7/7] net: cpsw: resume/suspend PHY on port start/stop   Sebastian Hesselbarth
• [RESEND PATCH v2 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Sebastian Hesselbarth
• [PATCH] OF: base: match each node compatible against all given matches first   Sebastian Hesselbarth
• [PATCH v2] serial: omap: Add support for optional wake-up   Kevin Hilman
• [PATCH v2] serial: omap: Add support for optional wake-up   Kevin Hilman
• [RFC PATCH 00/11] Embeddable Position Independent Executable   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Kevin Hilman
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Kevin Hilman
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Kevin Hilman
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Kevin Hilman
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Kevin Hilman
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Kevin Hilman
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Kevin Hilman
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Kevin Hilman
• [PATCH 1/2] sched/nohz: add debugfs control over sched_tick_max_deferment   Kevin Hilman
• [GIT PULL] ARM: imx: fixes for 3.13, part 2   Kevin Hilman
• [PATCH 00/17] Convert ARM sched_clock users to sched_clock_register()   Kevin Hilman
• [PATCH 00/17] Convert ARM sched_clock users to sched_clock_register()   Kevin Hilman
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Kevin Hilman
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Masami Hiramatsu
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Masami Hiramatsu
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Masami Hiramatsu
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Masami Hiramatsu
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   Masami Hiramatsu
• [PATCH v3 06/15] ARM: Disable jprobes test when built into thumb-mode kernel   Masami Hiramatsu
• [PATCH 0/5] ata: Add APM X-Gene SATA controller support   Loc Ho
• [PATCH 1/5] ata: Export AHCI library functions required by APM X-Gene SATA driver   Loc Ho
• [PATCH 2/5] arm64: Add APM X-Gene SATA DTS binding   Loc Ho
• [PATCH 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH 4/5] ata: Add APM X-Gene SATA serdes functions   Loc Ho
• [PATCH 5/5] Documentation: Add documentation for APM X-Gene SATA DTS binding   Loc Ho
• [PATCH 4/5] ata: Add APM X-Gene SATA serdes functions   Loc Ho
• [PATCH 2/5] arm64: Add APM X-Gene SATA DTS binding   Loc Ho
• [PATCH v2 0/5] ata: Add APM X-Gene SATA controller support   Loc Ho
• [PATCH v2 1/5] ata: Export AHCI library functions required by APM X-Gene SATA driver   Loc Ho
• [PATCH v2 2/5] arm64: Add APM X-Gene DTS entry for SATA controllers   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH v2 4/5] ata: Add APM X-Gene SATA serdes functions   Loc Ho
• [PATCH v2 5/5] Documentation: Add documentation for APM X-Gene SATA DTS binding   Loc Ho
• [PATCH v2 5/5] Documentation: Add documentation for APM X-Gene SATA DTS binding   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Loc Ho
• [PATCH 0/3] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY support   Loc Ho
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH 2/3] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY driver   Loc Ho
• [PATCH 3/3] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Loc Ho
• [PATCH v3 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v3 1/4] ata: Export required functions by APM X-Gene SATA driver   Loc Ho
• [PATCH v3 2/4] Documentation: Add documentation for APM X-Gene SATA controllor DTS binding   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v4 4/4] arm64: Add APM X-Gene SoC SATA DTS entries   Loc Ho
• UEFI Clock   Loc Ho
• UEFI Clock   Loc Ho
• [PATCH 2/3] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY driver   Loc Ho
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH 1/3] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• UEFI Clock   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v2 0/4] ata: Add APM X-Gene SoC 6.0Gbps SATA PHY support   Loc Ho
• [PATCH v2 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v2 2/4] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Loc Ho
• [PATCH v2 4/4] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Loc Ho
• [PATCH v2 4/4] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Loc Ho
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Loc Ho
• [PATCH v2 2/4] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Loc Ho
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Loc Ho
• [PATCH v4 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v4 1/4] ata: Export required functions by APM X-Gene SATA driver   Loc Ho
• [PATCH v4 2/4] Documentation:: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v4 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH] arm64: Add APM X-Gene SoC SATA host controller DTS entries   Loc Ho
• [PATCH v4 2/4] Documentation:: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v4 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v3 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v3 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v3 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v3 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v3 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v5 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v5 1/4] ata: Export required functions by APM X-Gene SATA driver   Loc Ho
• [PATCH v5 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v5 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v5 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v5 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH] seccomp: not compatible with ARM OABI   James Hogan
• [PATCH] clk: add specified-rate clock   James Hogan
• [PATCH] clk: add specified-rate clock   James Hogan
• [PATCH] clk: add specified-rate clock   James Hogan
• [PATCH v2 0/2] add specified-clock DT binding   James Hogan
• [PATCH v2 1/2] dt: binding: add specified-clock for discoverable rate clocks   James Hogan
• [PATCH v2 2/2] clk-fixed-rate: support specified-clock binding   James Hogan
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Henrique de Moraes Holschuh
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Henrique de Moraes Holschuh
• [PATCH 1/2] ARM: shmobile: bockw: enable HPB-DMAC in defconfig   Simon Horman
• [PATCH 1/2] ARM: shmobile: r8a7791: add Ether clock   Simon Horman
• [PATCH] RM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Simon Horman
• [PATCH v2] ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH 2/3] clk: shmobile: Add MSTP clock support   Simon Horman
• [PATCH] ARM: shmobile: r8a7790: Correct typo in clocks   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: Remove unused clock constants   Simon Horman
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Simon Horman
• [PATCH] ARM: shmobile: r8a7790: Correct typo in clocks   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: Remove unused clock constants   Simon Horman
• [PATCH v2 2/2] clocksource: sh_tmu: Add clk_prepare/unprepare support   Simon Horman
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Simon Horman
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Simon Horman
• [PATCH 03/03] ARM: shmobile: r7s72100 Genmai Multiplatform   Simon Horman
• [PATCH 02/03] ARM: shmobile: r7s72100 Genmai DT reference C bits   Simon Horman
• [PATCH 01/03] ARM: shmobile: r7s72100 Genmai DT reference DTS bits   Simon Horman
• [PATCH 00/04] ARM: shmobile: KZM9D legacy board code removal   Simon Horman
• [PATCH] ARM: shmobile: Enable MTU2 on r7s72100   Simon Horman
• [PATCH] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Simon Horman
• [PATCH] ARM: shmobile: r8a7790: Correct typo in clocks   Simon Horman
• [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code   Simon Horman
• [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code   Simon Horman
• [PATCH] ARM: shmobile: kzm9d: Enable AUTO_ZRELADDR in defconfig   Simon Horman
• [PATCH 03/14] ARM: shmobile: r8a7779: add HPB-DMAC support   Simon Horman
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 03/14] ARM: shmobile: r8a7779: add HPB-DMAC support   Simon Horman
• [PATCH] ARM: shmobile: Select USE_OF on EMEV2   Simon Horman
• [PATCH] ARM: shmobile: kzm9d: Enable AUTO_ZRELADDR in defconfig   Simon Horman
• [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Simon Horman
• [PATCH] ARM: shmobile: lager: mark GPIO keys as wake-up sources   Simon Horman
• [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Simon Horman
• [PATCH v2 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig   Simon Horman
• [PATCH v2 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig   Simon Horman
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Simon Horman
• [PATCH] sh_eth: add R8A7791 support   Simon Horman
• [PATCH 0/7] ARM: shmobile: Use interrupt macros in DT files   Simon Horman
• [PATCH] ARM: shmobile: Use ->init_late() on Lager   Simon Horman
• [PATCH] ARM: shmobile: lager: mark GPIO keys as wake-up sources   Simon Horman
• [PATCH 0/7] ARM: shmobile: Use interrupt macros in DT files   Simon Horman
• [PATCH 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Simon Horman
• [PATCH 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Simon Horman
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH] ARM: shmobile: Enable GPIO LEDs on Genmai   Simon Horman
• [PATCH] ARM: shmobile: Enable GPIO LEDs on Genmai   Simon Horman
• [PATCH] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Simon Horman
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Simon Horman
• [PATCH v2 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Simon Horman
• [PATCH 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Simon Horman
• [PATCH] ARM: shmobile: Use ->init_late() on Lager   Simon Horman
• [PATCH] ARM: shmobile: Use ->init_late() on Koelsch   Simon Horman
• [PATCH] ARM: shmobile: koelsch: mark GPIO keys as wake-up sources   Simon Horman
• [PATCH] ARM: shmobile: Hook up SW30-SW36 on Koelsch   Simon Horman
• [PATCH] ARM: shmobile: Use r8a7791 suffix for IRQC compat string   Simon Horman
• [PATCH] ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS   Simon Horman
• [PATCH v2] ARM: shmobile: Use ->init_late() on Lager   Simon Horman
• [PATCH] ARM: shmobile: Use r8a7790 suffix for MMCIF compat string   Simon Horman
• [PATCH] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Simon Horman
• [PATCH v2 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Simon Horman
• [PATCH v2] ARM: shmobile: Use ->init_late() on Lager   Simon Horman
• [PATCH] ARM: shmobile: lager: Constify lager_boards_compat_dt   Simon Horman
• [GIT PULL] Renesas ARM based SoC clock updates for v3.13   Simon Horman
• [PATCH 0/3] ARM: shmobile: marzen: enable HSPI0 to DTS   Simon Horman
• [PATCH 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7779: add HSPI support to DTSI   Simon Horman
• [PATCH 3/3] ARM: shmobile: marzen: enable HSPI0 in DTS   Simon Horman
• [RFC 00/17] ARM: shmobile: r8a7779, marzen: multiplatform   Simon Horman
• [PATCH 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Simon Horman
• [PATCH] ARM: shmobile: Koelsch DT reference GPIO LED support   Simon Horman
• [PATCH v2] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH v2] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Simon Horman
• [PATCH 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Simon Horman
• [RFC 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [RFC 16/17] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB   Simon Horman
• [RFC 08/17] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [RFC 13/17] ARM: shmobile: marzen-reference: Initialize CPG device   Simon Horman
• [PATCH RFC v2 00/17] ARM: shmobile: r8a7779, marzen: multiplatform   Simon Horman
• [PATCH RFC v2 01/17] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH RFC v2 02/17] clk: shmobile: r8a7779: Add MSTP clock support   Simon Horman
• [PATCH RFC v2 03/17] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Simon Horman
• [PATCH RFC v2 04/17] ARM: shmobile: r8a7779: Add clocks   Simon Horman
• [PATCH RFC v2 05/17] ARM: shmobile: r8a7779: Reference clocks   Simon Horman
• [PATCH RFC v2 06/17] ARM: shmobile: Sync Marzen DTS with Marzen reference DTS   Simon Horman
• [PATCH RFC v2 07/17] ARM: shmobile: r8a7779: Sort headers alphabetically   Simon Horman
• [PATCH RFC v2 08/17] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [PATCH RFC v2 09/17] ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to clock-r8a7779.c   Simon Horman
• [PATCH RFC v2 10/17] ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board code   Simon Horman
• [PATCH RFC v2 11/17] ARM: shmobile: r8a7779: Do not include sh_clk.h in r8a7779.h   Simon Horman
• [PATCH RFC v2 12/17] ARM: shmobile: r8a7779: Initial multiplatform support   Simon Horman
• [PATCH RFC v2 13/17] ARM: shmobile: marzen-reference: Initialize CPG device   Simon Horman
• [PATCH RFC v2 14/17] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and CMT   Simon Horman
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [PATCH RFC v2 16/17] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB   Simon Horman
• [PATCH RFC v2 17/17] ARM: shmobile: Remove Marzen reference DTS   Simon Horman
• [PATCH v2 0/3] ARM: shmobile: marzen: enable HSPI0 to DTS   Simon Horman
• [PATCH v2 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Simon Horman
• [PATCH v2 2/3] ARM: shmobile: r8a7779: add HSPI support to DTSI   Simon Horman
• [PATCH v2 3/3] ARM: shmobile: marzen: enable HSPI0 in DTS   Simon Horman
• [PATCH RFC v2 07/17] ARM: shmobile: r8a7779: Sort headers alphabetically   Simon Horman
• [PATCH RFC v2 02/17] clk: shmobile: r8a7779: Add MSTP clock support   Simon Horman
• [PATCH RFC v2 03/17] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Simon Horman
• [PATCH RFC v2 05/17] ARM: shmobile: r8a7779: Reference clocks   Simon Horman
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [PATCH] ARM: shmobile: lager: Constify lager_boards_compat_dt   Simon Horman
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [PATCH] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Simon Horman
• [PATCH] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Simon Horman
• [PATCH] irqchip: renesas-intc: Document DT bindings   Simon Horman
• [PATCH] irqchip: renesas-intc-irqpin: Update Documentation of DT bindings compat string and example   Simon Horman
• [PATCH 00/04] ARM: shmobile: Use SoC suffix for INTC compat string   Simon Horman
• [PATCH 01/15] i2c: shmobile/rcar: Restrict non-COMPILE_TEST compilation   Simon Horman
• [PATCH 02/15] input: sh_keysc: Restrict non-COMPILE_TEST compilation   Simon Horman
• [PATCH 04/15] iommu: shmobile: Enable driver compilation with COMPILE_TEST   Simon Horman
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Simon Horman
• [PATCH] ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref   Simon Horman
• [PATCH] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH] ARM: shmobile: Include all 4 GiB of memory on Lager   Simon Horman
• [PATCH] ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref   Simon Horman
• [PATCH v2] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Simon Horman
• [PATCH v2] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Simon Horman
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Simon Horman
• [PATCH] ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile   Simon Horman
• [GIT PULL 00/16] Renesas ARM based SoC cleanups for v3.14   Simon Horman
• [PATCH 01/16] ARM: shmobile: ape6evm: don't use named resource for MMCIF   Simon Horman
• [PATCH 02/16] ARM: shmobile: ape6evm: don't use named resource for SDHI   Simon Horman
• [PATCH 03/16] ARM: shmobile: lager: don't use named resource for MMCIF   Simon Horman
• [PATCH 04/16] ARM: shmobile: sh73a0: don't use named resource for TMU   Simon Horman
• [PATCH 05/16] ARM: shmobile: sh73a0: don't use named resource for I2C   Simon Horman
• [PATCH 06/16] ARM: shmobile: sh73a0: don't use named resource for IPMMU   Simon Horman
• [PATCH 07/16] ARM: shmobile: bockw: header cleanup   Simon Horman
• [PATCH 08/16] ARM: shmobile: r8a7779: cleanup registration of VIN   Simon Horman
• [PATCH 09/16] ARM: shmobile: Cosmetic update of Lager DT Reference   Simon Horman
• [PATCH 10/16] ARM: shmobile: Add r8a7790_register_pfc() function   Simon Horman
• [PATCH 11/16] ARM: shmobile: r8a7779: camera-rcar header cleanup   Simon Horman
• [PATCH 12/16] ARM: shmobile: r8a7790: Correct typo in clocks   Simon Horman
• [PATCH 13/16] ARM: shmobile: r8a7779: cleanup registration of sh_eth   Simon Horman
• [PATCH 14/16] ARM: shmobile: sh73a0: tidyup clock table order   Simon Horman
• [PATCH 15/16] ARM: shmobile: r7s72100: tidyup clock table order   Simon Horman
• [PATCH 16/16] ARM: shmobile: sh7372: tidyup clock table order   Simon Horman
• [PATCH 00/16] Renesas ARM based SoC defconfig updates for v3.14   Simon Horman
• [PATCH 01/16] ARM: shmobile: Genmai defconfig   Simon Horman
• [PATCH 02/16] ARM: shmobile: bockw: enable CONFIG_REGULATOR   Simon Horman
• [PATCH 03/16] ARM: shmobile: bockw: Do not set command line in defconfig   Simon Horman
• [PATCH 04/16] ARM: shmobile: marzen: Do not set command line in defconfig   Simon Horman
• [PATCH 05/16] ARM: shmobile: bockw: Do not disable CONFIG_INOTIFY_USER in defconfig   Simon Horman
• [PATCH 06/16] ARM: shmobile: marzen: Do not disable CONFIG_INOTIFY_USER in defconfig   Simon Horman
• [PATCH 07/16] ARM: shmobile: bockw: Enable CONFIG_VFP in defconfig   Simon Horman
• [PATCH 08/16] ARM: shmobile: marzen: Enable CONFIG_VFP in defconfig   Simon Horman
• [PATCH 09/16] ARM: shmobile: bockw: Do not enable CONFIG_DEVTMPFS defconfig   Simon Horman
• [PATCH 10/16] ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig   Simon Horman
• [PATCH 11/16] ARM: shmobile: bockw: Enable CONFIG_PACKET in defconfig   Simon Horman
• [PATCH 12/16] ARM: shmobile: marzen: Enable CONFIG_PACKET in defconfig   Simon Horman
• [PATCH 13/16] ARM: shmobile: marzen: Do not enable CONFIG_SMC911X in defconfig   Simon Horman
• [PATCH 14/16] ARM: shmobile: marzen: enable HPB-DMAC in defconfig   Simon Horman
• [PATCH 15/16] ARM: shmobile: bockw: enable HPB-DMAC in defconfig   Simon Horman
• [PATCH 16/16] ARM: shmobile: kzm9d: Enable AUTO_ZRELADDR in defconfig   Simon Horman
• [GIT PULL 00/16] Renesas ARM based SoC defconfig updates for v3.14   Simon Horman
• [PATCH trivial] include: uapi: standard all files' macro prefix and suffix, excluding "linux/" sub-directory   David Howells
• [PATCH trivial] include: uapi: standard all files' macro prefix and suffix, excluding "linux/" sub-directory   David Howells
• [PATCH] arm: imx: clk: correct arm clock usecount   Anson Huang
• at91: ubi: UBIFS error (pid 1): ubifs_iget: failed to read inode 1, error -2   Adrian Hunter
• [PATCH 2/5] net: MOXA ART: connect to PHY and add ethtool support   Ben Hutchings
• [PATCH v2 3/6] net: MOXA ART: add ethtool support   Ben Hutchings
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Kishon Vijay Abraham I
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Kishon Vijay Abraham I
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Kishon Vijay Abraham I
• [PATCH v2 8/9] phy: add Broadcom Kona USB2 PHY driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Kishon Vijay Abraham I
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Kishon Vijay Abraham I
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Kishon Vijay Abraham I
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Kishon Vijay Abraham I
• [PATCH 2/3] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH 2/3] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH 2/3] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V2 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH V2 2/2] ARM: dts: Enable ahci sata and sata phy   Kishon Vijay Abraham I
• [PATCH v3 00/10] Make dwc3 use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 01/10] usb: dwc3: invoke phy_resume after phy_init   Kishon Vijay Abraham I
• [PATCH v3 02/10] usb: dwc3: power off usb phy in error path   Kishon Vijay Abraham I
• [PATCH v3 03/10] usb: dwc3: preparation for adapting dwc3 to generic phy framework   Kishon Vijay Abraham I
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Kishon Vijay Abraham I
• [PATCH v3 05/10] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 06/10] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt   Kishon Vijay Abraham I
• [PATCH v3 07/10] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 08/10] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2   Kishon Vijay Abraham I
• [PATCH v3 09/10] phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/   Kishon Vijay Abraham I
• [PATCH v3 10/10] arm/dts: added dt properties to adapt to the new phy framwork   Kishon Vijay Abraham I
• [PATCH] phy: kconfig: add depends on "USB_SUPPORT" to OMAP_USB2 and TWL4030_USB   Kishon Vijay Abraham I
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Kishon Vijay Abraham I
• [PATCH v3 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Kishon Vijay Abraham I
• [PATCH v3 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Kishon Vijay Abraham I
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Kishon Vijay Abraham I
• [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Kishon Vijay Abraham I
• [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Kishon Vijay Abraham I
• [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Kishon Vijay Abraham I
• [PATCH] phy: kconfig: add depends on "USB_SUPPORT" to OMAP_USB2 and TWL4030_USB   Kishon Vijay Abraham I
• [PATCH v3 8/9] phy: add Broadcom Kona USB2 PHY driver   Kishon Vijay Abraham I
• [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx   Kishon Vijay Abraham I
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Kishon Vijay Abraham I
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Alexey Ignatov
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Alexey Ignatov
• [PATCH 01/12 diet] ARM: OMAP2+: Remove legacy omap3 board-*.c files and make mach-omap2 DT only for booting   Grazvydas Ignotas
• [RFC PATCH] arm64: Add arch support for PCI   Tanmay Inamdar
• [PATCH][RESEND 6/8] ALSA: memalloc: use gen_pool_dma_alloc() to allocate iram buffer   Takashi Iwai
• [PATCH 2/4] ALSA: atmel: remove dependency on <mach/gpio.h>   Takashi Iwai
• [alsa-devel] [PATCH] ASoC: kirkwood: Fix invalid SPDIF format   Takashi Iwai
• [alsa-devel] KNOT / CONTINUOUS   Takashi Iwai
• [PATCH v7 0/5] clk: clock deregistration support   Jonas Jensen
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Jonas Jensen
• [PATCH v7 0/5] clk: clock deregistration support   Jonas Jensen
• [PATCH] clk: Properly initialize reference count   Jonas Jensen
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Jonas Jensen
• [PATCH v2] phy: Add MOXA MDIO driver   Jonas Jensen
• [PATCH 1/5] net: MOXA ART: clear TX descriptor length bits between sends   Jonas Jensen
• [PATCH 2/5] net: MOXA ART: connect to PHY and add ethtool support   Jonas Jensen
• [PATCH 3/5] net: MOXA ART: add IFF_LIVE_ADDR_CHANGE flag   Jonas Jensen
• [PATCH 4/5] net: MOXA ART: generate random address   Jonas Jensen
• [PATCH 5/5] net: MOXA ART: use eth_mac_addr()   Jonas Jensen
• [PATCH 2/5] net: MOXA ART: connect to PHY and add ethtool support   Jonas Jensen
• [PATCH v2 1/6] net: MOXA ART: clear TX descriptor length bits between sends   Jonas Jensen
• [PATCH v2 2/6] net: MOXA ART: connect to PHY   Jonas Jensen
• [PATCH v2 3/6] net: MOXA ART: add ethtool support   Jonas Jensen
• [PATCH v2 4/6] net: MOXA ART: add IFF_LIVE_ADDR_CHANGE flag   Jonas Jensen
• [PATCH v2 5/6] net: MOXA ART: generate random address   Jonas Jensen
• [PATCH v2 6/6] net: MOXA ART: use eth_mac_addr()   Jonas Jensen
• [PATCH v6] gpio: Add MOXA ART GPIO driver   Jonas Jensen
• [PATCH v7] gpio: Add MOXA ART GPIO driver   Jonas Jensen
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Olof Johansson
• [PATCH] ARM: nommu: Implement dummy early_paging_init()   Olof Johansson
• [PATCH v9 16/18] arm, arm64: do not always merge biovec if we are running on Xen   Olof Johansson
• [PATCH v9 16/18] arm, arm64: do not always merge biovec if we are running on Xen   Olof Johansson
• [PATCH] ARM: nommu: Implement dummy early_paging_init()   Olof Johansson
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Olof Johansson
• [PATCH] ARM: make OABI default to off   Olof Johansson
• [PATCH v2] serial: omap: Add support for optional wake-up   Olof Johansson
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Olof Johansson
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Olof Johansson
• [PATCH] arm64: reboot driver missing dts entry and ACPI support for storm platform.   Olof Johansson
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Olof Johansson
• [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Olof Johansson
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Olof Johansson
• [PATCH] ARM: make OABI default to off   Olof Johansson
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Olof Johansson
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Olof Johansson
• [PATCH 4/5] ata: Add APM X-Gene SATA serdes functions   Olof Johansson
• [PATCH 2/5] arm64: Add APM X-Gene SATA DTS binding   Olof Johansson
• [PATCH] ARM: vt8500: add defconfig   Olof Johansson
• [PATCH] ARM: vt8500: add defconfig   Olof Johansson
• [PATCH v2 3/5] ata: Add APM X-Gene SATA driver   Olof Johansson
• [GIT PULL 0/6] ARM: SoC branches for 3.13   Olof Johansson
• [GIT PULL 1/6] ARM: SoC low-priority fixes for 3.13   Olof Johansson
• [GIT PULL 2/6] ARM: SoC cleanups for 3.13   Olof Johansson
• [GIT PULL 3/6] ARM: SoC platform changes for 3.13   Olof Johansson
• [GIT PULL 4/6] ARM: driver updates for 3.13   Olof Johansson
• [GIT PULL 5/6] ARM: SoC board updates for 3.13   Olof Johansson
• [GIT PULL 6/6] ARM: SoC DT updates for 3.13   Olof Johansson
• [PATCH] MAINTAINERS: drop discontinued mailing list   Olof Johansson
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Olof Johansson
• [GIT PULL] ARM: imx: fixes for 3.13   Olof Johansson
• [PATCH 1/2] ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD   Olof Johansson
• [PATCH 01/28] dmaengine: use DMA_COMPLETE for dma completion status   Olof Johansson
• [PATCH v4 2/4] ARM: make mach-xyz/Makefile.boot optional for !ARCH_MULTIPLATFORM   Olof Johansson
• [PATCH v4 3/4] ARM: v7-M: drop using mach/entry-macro.S   Olof Johansson
• [PATCH 01/28] dmaengine: use DMA_COMPLETE for dma completion status   Olof Johansson
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Olof Johansson
• [PATCH] ARM: tegra: init fuse before setting reset handler   Olof Johansson
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Olof Johansson
• [PATCH] ARM: omap: fix warning with LPAE build   Olof Johansson
• [PATCH] ARM: Fix warning for V7M builds   Olof Johansson
• [PATCH] ARM: nommu: add missing include of asm/procinfo.h   Olof Johansson
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Olof Johansson
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Olof Johansson
• [PATCH] ARM: omap: fix warning with LPAE build   Olof Johansson
• [PATCH] ARM: omap: fix warning with LPAE build   Olof Johansson
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Olof Johansson
• [PATCH 1/2] ARM: sti: only select errata 764369 if SMP   Olof Johansson
• [PATCH 2/2] ARM: highbank: only select errata 764369 if SMP   Olof Johansson
• [PATCH 2/2] ARM: highbank: only select errata 764369 if SMP   Olof Johansson
• UEFI Clock   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• UEFI Clock   Olof Johansson
• [PATCH] ARM: nommu: Include asm/procinfo.h to fix build warning   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [PATCH v2 0/3] arm: [U]EFI runtime services support   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [GIT PULL] at91: non-critical fixes for 3.13 #1   Olof Johansson
• Call for pre-3.13-rc1 fixes   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.13 merge window   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [PATCH] ARM: omap: fix warning with LPAE build   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [GIT PULL] ep93xx-devel for 3.12   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [GIT PULL] ep93xx-devel for 3.12   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [GIT PULL] few more omap fixes for v3.13 merge window   Olof Johansson
• [PATCH 0/4] Add missing components for X-Gene reboot drivers.   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• Patches from ARM folks solicited for the -stable tree   Olof Johansson
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Olof Johansson
• Patches from ARM folks solicited for the -stable tree   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• ACPI vs DT at runtime   Olof Johansson
• [PATCH V5] kbuild: dtbs_install: new make target   Olof Johansson
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Olof Johansson
• [GIT PULL][for 3.14] pull request to enable Hisilicon SoC from pxa git tree   Olof Johansson
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Olof Johansson
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Olof Johansson
• [PATCH] ARM: tegra: Provide dummy powergate implementation   Olof Johansson
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Olof Johansson
• [PATCH] ARM: ep93xx: remove deprecated IRQF_DISABLED   Olof Johansson
• [PATCH] arm: ep93xx: use soc bus   Olof Johansson
• [PATCH] ARM: dts: Add max77686 RTC interrupt to cros5250-common   Olof Johansson
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Olof Johansson
• [PATCH v11 0/7] ARM: support for the Trusted Foundations secure monitor   Olof Johansson
• [PATCH] ARM: bcm2835: add missing #xxx-cells to I2C nodes   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.13-rc   Olof Johansson
• [GIT PULL] ux500 fixes for v3.13-rcN   Olof Johansson
• [PATCH] Documentation: devicetree: arm: add lpae property to cpus/cpu bindings   Olof Johansson
• [GIT PULL] omap fixes against v3.13-rc1   Olof Johansson
• [PATCH] Documentation: devicetree: arm: add lpae property to cpus/cpu bindings   Olof Johansson
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Olof Johansson
• [PATCH] Documentation: devicetree: arm: add lpae property to cpus/cpu bindings   Olof Johansson
• [PATCH] typo fixes (coordiante -> coordinate) in am335x   Lee Jones
• [PATCH] typo fixes (coordiante -> coordinate) in am335x   Lee Jones
• [PATCH 1/2] ASoC: ab8500: Revert "ASoC: ab8500: Explicitly set I/O up"   Lee Jones
• [PATCH 2/2] ASoC: ab8500: Revert "ASoC: ab8500: Convert register I/O to regmap"   Lee Jones
• [PATCH 0/7] ARM: ux500: More DT only clean-ups for the platform   Lee Jones
• [PATCH 1/7] ARM: ux500: Remove legacy ATAG SSP support   Lee Jones
• [PATCH 2/7] ARM: ux500: Consolidate [A|D]8500 platform data   Lee Jones
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Lee Jones
• [PATCH 4/7] ARM: ux500: Clean-up non-DT IRQ initialisation   Lee Jones
• [PATCH 5/7] ARM: ux500: Remove unused call to register AMBA devices   Lee Jones
• [PATCH 6/7] ARM: ux500: Clean-up legacy extern prototype   Lee Jones
• [PATCH 7/7] ARM: ux500: Remove checking for DT during timer init as we are now DT only   Lee Jones
• [PATCH 00/13] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Lee Jones
• [PATCH 01/13] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Lee Jones
• [PATCH 02/13] dma: ste_dma40: Parse flags property for new 'high priority channel' request   Lee Jones
• [PATCH 03/13] ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion   Lee Jones
• [PATCH 04/13] ARM: ux500: Add DMA config bindings for MSP devices   Lee Jones
• [PATCH 05/13] ARM: ux500: Add ID properties to 'simply' differentiate between MSPs   Lee Jones
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Lee Jones
• [PATCH 07/13] ASoC: ux500_pcm: Extract MSP IDs from Device Tree   Lee Jones
• [PATCH 08/13] ASoC: generic-dmaengine-pcm: Clear slave_config memory   Lee Jones
• [PATCH 09/13] ASoC: Ux500: Match platform by device node when booting Device Tree   Lee Jones
• [PATCH 10/13] ASoC: ux500_pcm: Extend Device Tree support to deal with DMA data   Lee Jones
• [PATCH 11/13] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• [PATCH 12/13] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 13/13] ASoC: ux500_pcm: Take out pointless dev_dbg() call   Lee Jones
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Lee Jones
• [PATCH 2/7] ARM: ux500: Consolidate [A|D]8500 platform data   Lee Jones
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Lee Jones
• [PATCH 04/13] ARM: ux500: Add DMA config bindings for MSP devices   Lee Jones
• [PATCH 01/13] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Lee Jones
• [PATCH V2 1/5] mfd: as3722: add clock driver as mfd-sub device   Lee Jones
• [PATCH 1/7] ARM: ux500: Remove legacy ATAG SSP support   Lee Jones
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Lee Jones
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Lee Jones
• mfd: ab8500-debug: Add wake-up info   Lee Jones
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Lee Jones
• [PATCH 1/2] mfd: sec: reorder params in API for regmap consistency   Lee Jones
• [PATCH 2/2] mfd: max77693: reorder params in API for regmap consistency   Lee Jones
• [GIT PULL] [Final] MFD patches due for v3.13   Lee Jones
• [PATCH 0/4] mfd: rtsx: Decrease driver size and add new device   Lee Jones
• [PATCH 1/4] mfd: rtsx: Generify call-back operations in order to reduce code duplication   Lee Jones
• [PATCH 2/4] mfd: rtsx: Generify the switch voltage routine   Lee Jones
• [PATCH 3/4] mfd: rtsx: Add rtl8402 card reader   Lee Jones
• [PATCH 4/4] mfd: rtsx: Prevent 'used uninitialised' warnings   Lee Jones
• [PATCH 00/10] mtd: st_spi_fsm: Add new device   Lee Jones
• [PATCH 01/10] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 03/10] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Lee Jones
• [PATCH 04/10] mtd: st_spi_fsm: Supply framework for device requests   Lee Jones
• [PATCH 05/10] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO   Lee Jones
• [PATCH 06/10] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes   Lee Jones
• [PATCH 07/10] mtd: st_spi_fsm: Add support for JEDEC ID extraction   Lee Jones
• [PATCH 08/10] mtd: st_spi_fsm: Provide device look-up table   Lee Jones
• [PATCH 09/10] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID   Lee Jones
• [PATCH 10/10] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [PATCH 2/4] mfd: rtsx: Generify the switch voltage routine   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [patch] mfd: ab8500-debugfs: move dereference after check for NULL   Lee Jones
• [PATCH 1/2] ASoC: ab8500: Revert "ASoC: ab8500: Explicitly set I/O up"   Lee Jones
• [PATCH 2/2] ASoC: ab8500: Revert "ASoC: ab8500: Convert register I/O to regmap"   Lee Jones
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Lee Jones
• [PATCH 01/10] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Lee Jones
• [PATCH 02/10] dma: ste_dma40: Parse flags property for new 'high priority channel' request   Lee Jones
• [PATCH 03/10] ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion   Lee Jones
• [PATCH 04/10] ARM: ux500: Add DMA config bindings for MSP devices   Lee Jones
• [PATCH 05/10] ASoC: Ux500: Match platform by device node when booting Device Tree   Lee Jones
• [PATCH 06/10] ASoC: ux500_pcm: Extend Device Tree support to deal with DMA data   Lee Jones
• [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• [PATCH 08/10] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 09/10] ASoC: ux500_pcm: Take out pointless dev_dbg() call   Lee Jones
• [PATCH 10/10] ASoC: ux500: Dynamically fill DAI driver data on probe   Lee Jones
• [PATCH 08/10] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Lee Jones
• [PATCH] ARM: ux500: get rid of unused header   Lee Jones
• [PATCH] ARM: ux500: delete Nomadik pinctrl AUXDATA   Lee Jones
• [PATCH] ARM: ux500: delete remnant pin config macros   Lee Jones
• [PATCH 1/2] ARM: ux500: decomission the non-DT MTU init sequence   Lee Jones
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Lee Jones
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Lee Jones
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Lee Jones
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Lee Jones
• [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core   Lee Jones
• [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core   Lee Jones
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Lee Jones
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Lee Jones
• [PATCH 01/23] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH 02/23] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 03/23] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Lee Jones
• [PATCH 04/23] mtd: st_spi_fsm: Supply framework for device requests   Lee Jones
• [PATCH 05/23] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO   Lee Jones
• [PATCH 06/23] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes   Lee Jones
• [PATCH 07/23] mtd: st_spi_fsm: Add support for JEDEC ID extraction   Lee Jones
• [PATCH 08/23] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Lee Jones
• [PATCH 09/23] mtd: st_spi_fsm: Provide device look-up table   Lee Jones
• [PATCH 10/23] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID   Lee Jones
• [PATCH 11/23] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [PATCH 12/23] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Lee Jones
• [PATCH 13/23] mtd: st_spi_fsm: Fetch platform specific configurations   Lee Jones
• [PATCH 14/23] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s)   Lee Jones
• [PATCH 15/23] mtd: st_spi_fsm: Fetch boot-device from mode pins   Lee Jones
• [PATCH 16/23] mtd: st_spi_fsm: Provide the erase one sector sequence   Lee Jones
• [PATCH 17/23] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode   Lee Jones
• [PATCH 18/23] mtd: st_spi_fsm: Prepare read/write sequences according to configuration   Lee Jones
• [PATCH 19/23] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset   Lee Jones
• [PATCH 20/23] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode   Lee Jones
• [PATCH 21/23] mtd: st_spi_fsm: Update the flash Volatile Configuration Register   Lee Jones
• [PATCH 22/23] mtd: st_spi_fsm: Provide the default read/write configurations   Lee Jones
• [PATCH 23/23] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations   Lee Jones
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v4 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Lee Jones
• [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Lee Jones
• [PATCH 00/13] mfd: menelaus: a few cleanups   Lee Jones
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Lee Jones
• [PATCH v3 00/36] mtd: st_spi_fsm: Add new driver   Lee Jones
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH v3 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Lee Jones
• [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests   Lee Jones
• [PATCH v3 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO   Lee Jones
• [PATCH v3 06/36] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes   Lee Jones
• [PATCH v3 07/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction   Lee Jones
• [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Lee Jones
• [PATCH v3 09/36] mtd: st_spi_fsm: Provide device look-up table   Lee Jones
• [PATCH v3 10/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID   Lee Jones
• [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Lee Jones
• [PATCH v3 12/36] mtd: st_spi_fsm: Fetch platform specific configurations   Lee Jones
• [PATCH v3 13/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s)   Lee Jones
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Lee Jones
• [PATCH v3 15/36] mtd: st_spi_fsm: Fetch boot-device from mode pins   Lee Jones
• [PATCH v3 16/36] mtd: st_spi_fsm: Provide the erase one sector sequence   Lee Jones
• [PATCH v3 17/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode   Lee Jones
• [PATCH v3 18/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration   Lee Jones
• [PATCH v3 19/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset   Lee Jones
• [PATCH v3 20/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode   Lee Jones
• [PATCH v3 21/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register   Lee Jones
• [PATCH v3 22/36] mtd: st_spi_fsm: Provide the default read/write configurations   Lee Jones
• [PATCH v3 23/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations   Lee Jones
• [PATCH v3 24/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back   Lee Jones
• [PATCH v3 25/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase   Lee Jones
• [PATCH v3 26/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device   Lee Jones
• [PATCH v3 27/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO   Lee Jones
• [PATCH v3 28/36] mtd: st_spi_fsm: Supply a busy wait for post-write status   Lee Jones
• [PATCH v3 29/36] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device   Lee Jones
• [PATCH v3 30/36] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device   Lee Jones
• [PATCH v3 31/36] mtd: st_spi_fsm: Add the ability to read the FSM's status   Lee Jones
• [PATCH v3 32/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register   Lee Jones
• [PATCH v3 33/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back   Lee Jones
• [PATCH v3 34/36] mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back   Lee Jones
• [PATCH v3 35/36] mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back   Lee Jones
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Lee Jones
• [PATCH 00/10] ASoC: dma: ARM: ux500: Obtain DMA data from Device Tree   Lee Jones
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Rick Jones
• [PATCH 0/2] ARM: dts: omap4: Fix pin muxing for wl12xx   Balaji T K
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Balaji T K
• [PATCH 2/2] ARM: dts: omap4-sdp: Fix pin muxing for wl12xx   Balaji T K
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Balaji T K
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Balaji T K
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [GIT PULL] extcon fixes for 3.13-rc2   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH 1/2] genirq: error reporting in request_percpu_irq() and request_threaded_irq()   Vinayak Kale
• [PATCH 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V2 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V2 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V2 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V2 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V3 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V3 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V3 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V3 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V3 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V4 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V4 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V4 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V4 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V4 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V5 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V5 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V5 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V5 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH 1/3] clk: exynos5250: save/restore EPLL0 configuration   Sachin Kamat
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Sachin Kamat
• [PATCH 3/3] clk: exynos5250: register APLL rate table   Sachin Kamat
• [PATCH 1/3] clk: exynos5250: save/restore EPLL0 configuration   Sachin Kamat
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Sachin Kamat
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Sachin Kamat
• [RFC v2 0/4] Add basic support for ASV   Sachin Kamat
• [RFC v2 0/4] Add basic support for ASV   Sachin Kamat
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Sachin Kamat
• [PATCH 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Sachin Kamat
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Sachin Kamat
• [PATCH 0/3] follow up fixes for V7 big endian changes   Victor Kamensky
• [PATCH 1/3] ARM: __fixup_smp read of SCU config should do byteswap in BE case   Victor Kamensky
• [PATCH 2/3] ARM: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case   Victor Kamensky
• [PATCH 3/3] ARM: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE   Victor Kamensky
• [PATCH 20/23] ARM: signal: sigreturn_codes should be endian neutral to work in BE8   Victor Kamensky
• [PATCH 0/3] follow up fixes for V7 big endian changes   Victor Kamensky
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH 20/23] ARM: signal: sigreturn_codes should be endian neutral to work in BE8   Victor Kamensky
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v2] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v2] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v2] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v3] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v3] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v4] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v4] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH v4] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Victor Kamensky
• [PATCH] arm64: reboot driver missing dts entry and ACPI support for storm platform.   Feng Kan
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Feng Kan
• [PATCH 0/4] Add missing components for X-Gene reboot drivers.   Feng Kan
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Feng Kan
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Feng Kan
• [PATCH] ARM: orion5x: Fix typo in device_type property of phy node   Srinivas Kandagatla
• [PATCH] ARM: dove: Fix typo in device_type property of phy node   Srinivas Kandagatla
• [PATCH 1/4] clk: keystone: use clkod register bits for postdiv   Murali Karicheri
• [PATCH 2/4] keystone: dts: add/modify clock nodes   Murali Karicheri
• [PATCH 3/4] keystone: dts: fix typo in the ddr3 pllclk node name   Murali Karicheri
• [PATCH 4/4] keystone: dts: add paclk divider clock node   Murali Karicheri
• [PATCH v2 0/4]   Murali Karicheri
• [PATCH v2 1/4] clk: keystone: use clkod register bits for postdiv   Murali Karicheri
• [PATCH v2 2/4] keystone: dts: add a k2hk-evm specific dts file   Murali Karicheri
• [PATCH v2 3/4] keystone: dts: fix typo in the ddr3 pllclk node name   Murali Karicheri
• [PATCH v2 4/4] keystone: dts: add paclk divider clock node   Murali Karicheri
• [PATCH v2 0/4 - Keystone DTS and clock driver updates]   Murali Karicheri
• [PATCH v2 1/4] clk: keystone: use clkod register bits for postdiv   Murali Karicheri
• [PATCH v2 2/4] keystone: dts: add a k2hk-evm specific dts file   Murali Karicheri
• [PATCH v2 3/4] keystone: dts: fix typo in the ddr3 pllclk node name   Murali Karicheri
• [PATCH v2 4/4] keystone: dts: add paclk divider clock node   Murali Karicheri
• [PATCH v2 0/4]   Karicheri, Muralidharan
• [PATCH v2 0/4 - Keystone DTS and clock driver updates]   Karicheri, Muralidharan
• [PATCH 2/7] arm: dt: zynq: Add 'cpus' node   Sudeep KarkadaNagesha
• [PATCH 2/7] arm: dt: zynq: Add 'cpus' node   Sudeep KarkadaNagesha
• [PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value   Chander Kashyap
• [Patch v4 0/2] Enable all cpus in Exynos5420   Chander Kashyap
• [PATCH v2] clk: exynos5420: fix cpll clock register offsets   Chander Kashyap
• [PATCH] I2C: BCM2835: Linking platform nodes to adapter nodes   Charles Keepax
• [PATCH] arm: check stack pointer in get_wchan   Konstantin Khlebnikov
• [PATCH 00/12] Introduce davinci AEMIF driver   Khoronzhuk, Ivan
• [PATCH 01/12] mtd: nand: davinci: fix driver registration   Khoronzhuk, Ivan
• [PATCH 02/12] mtd: nand: davinci: check required ti,davinci-chipselect property   Khoronzhuk, Ivan
• [PATCH 03/12] mtd: nand: davinci: simplify error handling   Khoronzhuk, Ivan
• [PATCH 04/12] mtd: nand: davinci: move bindings under mtd   Khoronzhuk, Ivan
• [PATCH 05/12] mtd: nand: davinci: extend description of bindings   Khoronzhuk, Ivan
• [PATCH 06/12] mtd: nand: davinci: adjust DT properties to MTD generic   Khoronzhuk, Ivan
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Khoronzhuk, Ivan
• [PATCH 08/12] memory: davinci-aemif: add bindings for AEMIF driver   Khoronzhuk, Ivan
• [PATCH 09/12] mtd: nand: davinci: reuse driver for Keystone arch   Khoronzhuk, Ivan
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Khoronzhuk, Ivan
• [PATCH 11/12] mtd: nand: davinci: don't request AEMIF address range   Khoronzhuk, Ivan
• [PATCH 12/12] arm: dts: keystone: add AEMIF/NAND device entry   Khoronzhuk, Ivan
• [PATCH v2 0/6] Update Davinci watchdog driver   Ivan Khoronzhuk
• [PATCH 1/6] watchdog: davinci: change driver to use WDT core   Ivan Khoronzhuk
• [PATCH 2/6] watchdog: davinci: use davinci_wdt_device structure to hold device data   Ivan Khoronzhuk
• [PATCH 3/6] watchdog: davinci: add GET_TIMELEFT option support   Ivan Khoronzhuk
• [PATCH 4/6] watchdog: davinci: add "timeout-sec" property   Ivan Khoronzhuk
• [PATCH 5/6] watchdog: davinci: reuse driver for keystone arch   Ivan Khoronzhuk
• [PATCH 6/6] arm: dts: keystone: add watchdog entry   Ivan Khoronzhuk
• [PATCH 0/7] Davinci nand driver fixes and updates   Ivan Khoronzhuk
• [PATCH 1/7] mtd: nand: davinci: fix driver registration   Ivan Khoronzhuk
• [PATCH 2/7] mtd: nand: davinci: return ENOMEM if memory allocation is failed   Ivan Khoronzhuk
• [PATCH 3/7] mtd: nand: davinci: check required ti, davinci-chipselect property   Ivan Khoronzhuk
• [PATCH 4/7] mtd: nand: davinci: simplify error handling   Ivan Khoronzhuk
• [PATCH 5/7] mtd: nand: davinci: move bindings under mtd   Ivan Khoronzhuk
• [PATCH 6/7] mtd: nand: davinci: extend description of bindings   Ivan Khoronzhuk
• [PATCH 7/7] mtd: nand: davinci: adjust DT properties to MTD generic   Ivan Khoronzhuk
• [PATCH 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH 0/3] Reuse davinci-nand driver for Keystone arch   Ivan Khoronzhuk
• [PATCH 1/3] mtd: nand: davinci: reuse driver for Keystone arch   Ivan Khoronzhuk
• [PATCH 2/3] mtd: nand: davinci: don't set timings if AEMIF is used   Ivan Khoronzhuk
• [PATCH 3/3] mtd: nand: davinci: don't request AEMIF address range   Ivan Khoronzhuk
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v2 01/10] mtd: nand: davinci: fix driver registration   Ivan Khoronzhuk
• [PATCH v2 02/10] mtd: nand: davinci: return ENOMEM if memory allocation is failed   Ivan Khoronzhuk
• [PATCH v2 03/10] mtd: nand: davinci: check required ti, davinci-chipselect property   Ivan Khoronzhuk
• [PATCH v2 04/10] mtd: nand: davinci: simplify error handling   Ivan Khoronzhuk
• [PATCH v2 05/10] mtd: nand: davinci: move bindings under mtd   Ivan Khoronzhuk
• [PATCH v2 06/10] mtd: nand: davinci: extend description of bindings   Ivan Khoronzhuk
• [PATCH v2 07/10] mtd: nand: davinci: adjust DT properties to MTD generic   Ivan Khoronzhuk
• [PATCH v2 08/10] mtd: nand: davinci: reuse driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v2 09/10] mtd: nand: davinci: don't set timings if AEMIF is used   Ivan Khoronzhuk
• [PATCH 10/10] mtd: nand: davinci: don't request AEMIF address range   Ivan Khoronzhuk
• [PATCH v2 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH v2 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v2 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH] clk: keystone: gate: don't use reserved bits   Ivan Khoronzhuk
• [PATCH v3 0/6] Update Davinci watchdog driver   Ivan Khoronzhuk
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Ivan Khoronzhuk
• [PATCH v3 2/6] watchdog: davinci: use davinci_wdt_device structure to hold device data   Ivan Khoronzhuk
• [PATCH v3 3/6] watchdog: davinci: add GET_TIMELEFT option support   Ivan Khoronzhuk
• [PATCH v3 4/6] watchdog: davinci: add "timeout-sec" property   Ivan Khoronzhuk
• [PATCH v3 5/6] watchdog: davinci: reuse driver for keystone arch   Ivan Khoronzhuk
• [PATCH v3 5/6] watchdog: davinci: reuse driver for keystone arch   Ivan Khoronzhuk
• [PATCH v3 6/6] arm: dts: keystone: add watchdog entry   Ivan Khoronzhuk
• [PATCH] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Ivan Khoronzhuk
• [PATCH v4 0/5] Update Davinci watchdog driver   Ivan Khoronzhuk
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   Ivan Khoronzhuk
• [PATCH v4 2/5] watchdog: davinci: use davinci_wdt_device structure to hold device data   Ivan Khoronzhuk
• [PATCH v4 3/5] watchdog: davinci: add GET_TIMELEFT option support   Ivan Khoronzhuk
• [PATCH v4 4/5] watchdog: davinci: add "timeout-sec" property   Ivan Khoronzhuk
• [PATCH v4 5/5] watchdog: davinci: reuse driver for keystone arch   Ivan Khoronzhuk
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Ivan Khoronzhuk
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Ivan Khoronzhuk
• [PATCH v3 2/4] AArch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [PATCH v3 2/4] AArch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [PATCH v3 3/4] AArch64: KGDB: Add step debugging support   Vijay Kilari
• [PATCH v3 0/3] MCPM/TC2 support for CPU powerdown synchronisation   Vijay Kilari
• [RFC v1 PATCH] ARM64: KGDB: Add FP/SIMD debug support   Vijay Kilari
• [PATCH v4 3/4] AArch64: KGDB: Add step debugging support   Vijay Kilari
• [PATCH v4 3/4] AArch64: KGDB: Add step debugging support   Vijay Kilari
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Vijay Kilari
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Vijay Kilari
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Vijay Kilari
• [RESEND] [PATCH V3] ARM: dts: Add DMA controller node info on Exynos5420.   Kukjin Kim
• [Patch v4 0/2] Enable all cpus in Exynos5420   Kukjin Kim
• [PATCH] ARM: dts: Add max77686 RTC interrupt to cros5250-common   Kukjin Kim
• [PATCH] ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8   Kukjin Kim
• [PATCH] clk: samsung: exynos4: Correct SRC_MFC register   Seung-Woo Kim
• [PATCHv4][ 3/7] staging: imx-drm: Add RGB666 support for parallel display.   Troy Kisky
• [PATCH 0/8] imx6 dts cleanup series   Troy Kisky
• [PATCH 1/8] ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT   Troy Kisky
• [PATCH 2/8] ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag   Troy Kisky
• [PATCH 3/8] ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups   Troy Kisky
• [PATCH 4/8] ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH   Troy Kisky
• [PATCH 5/8] ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH   Troy Kisky
• [PATCH 6/8] ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH   Troy Kisky
• [PATCH 7/8] ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH   Troy Kisky
• [PATCH 8/8] ARM: dts: imx: sabrelite: add dualLite support   Troy Kisky
• [PATCH 3/8] ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups   Troy Kisky
• [PATCH V2 1/1] ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups   Troy Kisky
• [PATCH V2 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Troy Kisky
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   Andi Kleen
• [RFC PATCH 0/4] wire up CPU features to udev based module loading   Andi Kleen
• [PATCH 0/2] ARM: i.MX28: define various external xtal frequencies in DT   Marc Kleine-Budde
• [PATCH 1/2] ARM: i.MX28: define ref_xtal frequency in DT   Marc Kleine-Budde
• [PATCH 2/2] ARM: i.MX28: define external RTC crystal frequency in DT   Marc Kleine-Budde
• [PATCH 1/3] can: mcp251x: Convert driver to use common clk framework   Marc Kleine-Budde
• [PATCH] ARM i.MX5: fix "shift" value for lp_apm_sel   Marc Kleine-Budde
• [PATCH] ARM i.MX5: fix "shift" value for lp_apm_sel   Marc Kleine-Budde
• [PATCH] ARM: i.MX6q: fix the wrong parent of can_root clock   Marc Kleine-Budde
• [PATCH v2] ARM i.MX5: fix "shift" value for lp_apm_sel on i.MX50 and i.MX53   Marc Kleine-Budde
• [PATCH 0/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Marc Kleine-Budde
• [PATCH 1/2] can: flexcan: use correct clock as base for bit rate calculation   Marc Kleine-Budde
• [PATCH 2/2] ARM i.MX5: set CAN peripheral clock to 24 MHz parent   Marc Kleine-Budde
• [PATCH 2/2] ARM i.MX5: set CAN peripheral clock to 24 MHz parent   Marc Kleine-Budde
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Marc Kleine-Budde
• [PATCH v2 1/2] can: flexcan: use correct clock as base for bit rate calculation   Marc Kleine-Budde
• [PATCH v2 2/2] ARM i.MX5: set CAN peripheral clock to 24 MHz parent   Marc Kleine-Budde
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Marc Kleine-Budde
• [PATCH v2 1/2] can: flexcan: use correct clock as base for bit rate calculation   Marc Kleine-Budde
• [PATCH] ARM: i.MX6q: fix the wrong parent of can_root clock   Marc Kleine-Budde
• [PATCH v2 1/2] can: flexcan: use correct clock as base for bit rate calculation   Marc Kleine-Budde
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Marc Kleine-Budde
• [PATCH] IMX6 flexcan: Change serial clock_feq source from IPG clock to PER clock   Marc Kleine-Budde
• [PATCH] ARM: imx: drop support for irq priorisation   Uwe Kleine-König
• [PATCH 0/3] v7-M support using MULTIPLATFORM   Uwe Kleine-König
• [PATCH] ARM: orion5x: drop unused include from common.c   Uwe Kleine-König
• [PATCH] ARM: imx: drop support for irq priorisation   Uwe Kleine-König
• [PATCH v4 0/4] Energy Micro efm32 support   Uwe Kleine-König
• [PATCH v4 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH v4 2/4] ARM: make mach-xyz/Makefile.boot optional for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH v4 3/4] ARM: v7-M: drop using mach/entry-macro.S   Uwe Kleine-König
• [PATCH v4 4/4] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH v4 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH] ARM: u300: fix timekeeping when periodic mode is used   Uwe Kleine-König
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH v4 4/4] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Uwe Kleine-König
• [PATCH 20/23] ARM: signal: sigreturn_codes should be endian neutral to work in BE8   Uwe Kleine-König
• linux-next: manual merge of the gpio tree with the arm-soc and cortex trees   Uwe Kleine-König
• [PATCH 20/23] ARM: signal: sigreturn_codes should be endian neutral to work in BE8   Uwe Kleine-König
• [PATCH] rtc: pxa: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Uwe Kleine-König
• kernel BUG at kernel/kallsyms.c:222!   Uwe Kleine-König
• [GIT PULL] prefetch support for 3.13   Uwe Kleine-König
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Uwe Kleine-König
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Uwe Kleine-König
• [PATCH 20/23] ARM: signal: sigreturn_codes should be endian neutral to work in BE8   Uwe Kleine-König
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH] watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE   Uwe Kleine-König
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Uwe Kleine-König
• [PATCH 0/4] Getting rid of mach/timex.h usages below arch/arm   Uwe Kleine-König
• [PATCH 1/4] ARM: sa1100: stop using mach/timex.h   Uwe Kleine-König
• [PATCH 2/4] ARM: netx: stop using mach/timex.h   Uwe Kleine-König
• [PATCH 3/4] ARM: mmp: stop using mach/timex.h   Uwe Kleine-König
• [PATCH 4/4] ARM: ep93xx: stop using mach/timex.h   Uwe Kleine-König
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Uwe Kleine-König
• [PATCH 1/2] ARM: default PHYS_OFFSET if !MMU   Uwe Kleine-König
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] RFC: framebuffer: provide generic get_fb_unmapped_area   Uwe Kleine-König
• [PATCH] RFC: framebuffer: provide generic get_fb_unmapped_area   Uwe Kleine-König
• [PATCH] RFC: framebuffer: provide generic get_fb_unmapped_area   Uwe Kleine-König
• [GIT PULL] prefetch support for 3.13   Uwe Kleine-König
• [PATCH v3] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Uwe Kleine-König
• [PATCH v4 0/4] Energy Micro efm32 support   Uwe Kleine-König
• [PATCH v4 0/4] Energy Micro efm32 support   Uwe Kleine-König
• ARM: nommu: Boot hang after VFS: Mounted root (ext2 filesystem) on device 1:0.   Uwe Kleine-König
• [PATCH 0/3] leds/pwm: don't call pwm_disable when setting brightness   Uwe Kleine-König
• [PATCH 1/3] pwm/doc: Clearify that the pin state after pwm_disable is undefined   Uwe Kleine-König
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Uwe Kleine-König
• [PATCH 3/3] leds/pwm: fix driver description and make license match the header   Uwe Kleine-König
• [PATCH] ARM: u300: fix timekeeping when periodic mode is used   Uwe Kleine-König
• [PATCH v2 4/4] ARM: ep93xx: stop using mach/timex.h   Uwe Kleine-König
• [PATCH] rtc: pxa: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• ARM: add support to dump the kernel page tables   Uwe Kleine-König
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH 1/4] ARM: sa1100: stop using mach/timex.h   Uwe Kleine-König
• [PATCH 5/4] ARM: at91: don't use <mach/timex.h>   Uwe Kleine-König
• [PATCH] input: ixp4xx-beeper: don't use symbols from <mach/timex.h>   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH 6/4] ARM: ixp4xx: stop using <mach/timex.h>   Uwe Kleine-König
• [PATCH 5/4] ARM: at91: don't use <mach/timex.h>   Uwe Kleine-König
• [PATCH] tty: atmel_serial: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH 5/4 v2] ARM: at91: don't use <mach/timex.h>   Uwe Kleine-König
• [PATCH] tty: atmel_serial: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] tty: atmel_serial: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH v2] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Taras Kondratiuk
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Taras Kondratiuk
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle   Taras Kondratiuk
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Taras Kondratiuk
• [PATCH] ARM: keystone: enable big endian support   Taras Kondratiuk
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   Taras Kondratiuk
• [PATCH v6 1/6] gpio: davinci: use readl/writel instead of __raw_*   Taras Kondratiuk
• [PATCH v2] ARM: OMAP4/highbank: Flush L2 cache before disabling   Taras Kondratiuk
• [PATCH 4/9] ARM: kprobes-test: Use <asm/opcodes.h> for ARM instruction building   Taras Kondratiuk
• [PATCH 2/9] ARM: kprobes: fix instruction fetch order with <asm/opcodes.h>   Taras Kondratiuk
• [PATCH 9/9] ARM: asm/opcodes.h: use ARM_HAVE_INST to use .inst to build instructions   Taras Kondratiuk
• [RFC] kprobes/kprobes-test fixes, .inst updates   Taras Kondratiuk
• [PATCH 00/11] Make omap24xx booting device tree based for v3.14 merge window   Aaro Koskinen
• [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio   Aaro Koskinen
• [PATCH] ARM: OMAP: dts: add n8x0 onenand   Aaro Koskinen
• ARM: v3.13-rc1: USB regression   Aaro Koskinen
• ARM: v3.13-rc1: USB regression   Aaro Koskinen
• ARM: v3.13-rc1: USB regression   Aaro Koskinen
• [PATCH 00/13] mfd: menelaus: a few cleanups   Aaro Koskinen
• [PATCH 00/13] mfd: menelaus: a few cleanups   Aaro Koskinen
• [PATCH 00/13] mfd: menelaus: a few cleanups   Aaro Koskinen
• [PATCH v2] dma: edma: Add support for Cyclic DMA   Vinod Koul
• [PATCH][RESEND 3/8] dma: mmp_tdma: use gen_pool_dma_alloc() to allocate descriptor   Vinod Koul
• [PATCH 01/28] dmaengine: use DMA_COMPLETE for dma completion status   Vinod Koul
• [PATCH 01/28] dmaengine: use DMA_COMPLETE for dma completion status   Vinod Koul
• [alsa-devel] [PATCHv1 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Vinod Koul
• [PATCH] dmaengine: Add support for BCM2835.   Vinod Koul
• [PATCHv3] dmaengine: Add support for BCM2835   Vinod Koul
• [PATCH v5 2/5] dma: mxs-dma: Report correct residue for cyclic DMA   Vinod Koul
• [PATCH v5 0/5] dma: mxs-dma bugfixes and cleanup   Vinod Koul
• [PATCH 1/2] dmaengine: add msm bam dma driver   Vinod Koul
• [PATCH] dmaengine: Add support for BCM2835.   Vinod Koul
• [PATCH v11] dmaengine: Add MOXA ART DMA engine driver   Vinod Koul
• [PATCH 02/13] dma: ste_dma40: Parse flags property for new 'high priority channel' request   Vinod Koul
• [PATCH 01/13] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Vinod Koul
• [PATCH] dmaengine: Add support for BCM2835.   Vinod Koul
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Vinod Koul
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi   Vinod Koul
• [PATCH] mmp_pdma: Style neatening   Vinod Koul
• Build warning in drivers/dma/mmp_tdma.c   Vinod Koul
• [PATCH 1/2] mfd: sec: reorder params in API for regmap consistency   Krzysztof Kozlowski
• [PATCH 2/2] mfd: max77693: reorder params in API for regmap consistency   Krzysztof Kozlowski
• [PATCH v2 0/5] mfd: max14577: Add max14577 MFD drivers   Krzysztof Kozlowski
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v2 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Krzysztof Kozlowski
• [PATCH v2 3/5] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v2 5/5] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v2 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v3 0/5] mfd: max14577: Add max14577 MFD drivers   Krzysztof Kozlowski
• [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v3 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Krzysztof Kozlowski
• [PATCH v3 3/5] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v3 5/5] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v3 3/5] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v3 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v3 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Krzysztof Kozlowski
• [PATCH v4 0/5] mfd: max14577: Add max14577 MFD drivers   Krzysztof Kozlowski
• [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core   Krzysztof Kozlowski
• [PATCH v4 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device   Krzysztof Kozlowski
• [PATCH v4 3/5] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v4 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v4 5/5] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCHv9 01/43] clk: Add support for regmap register read/write   Tero Kristo
• [PATCHv9 06/43] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv9 07/43] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv9 08/43] clk: ti: add composite clock support   Tero Kristo
• [PATCHv9 08/43] clk: ti: add composite clock support   Tero Kristo
• [PATCHv9 09/43] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv9 10/43] clk: ti: add support for TI fixed factor clock   Tero Kristo
• [PATCHv9 09/43] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv9 00/43] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv9 06/43] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv9 07/43] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv9 09/43] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv9 11/43] CLK: TI: add support for gate clock   Tero Kristo
• [PATCHv9 33/43] ARM: dts: am43xx clock data   Tero Kristo
• [PATCHv9 12/43] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv9 13/43] clk: ti: add support for basic mux clock   Tero Kristo
• [PATCHv9 07/43] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv9 32/43] ARM: dts: AM35xx: use DT clock data   Tero Kristo
• [PATCHv9 38/43] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Tero Kristo
• [PATCHv9 01/43] clk: Add support for regmap register read/write   Tero Kristo
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions   Tero Kristo
• [PATCHv10 02/41] CLK: TI: add DT alias clock registration mechanism   Tero Kristo
• [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv10 04/41] CLK: TI: Add DPLL clock support   Tero Kristo
• [PATCHv10 05/41] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv10 06/41] clk: ti: add composite clock support   Tero Kristo
• [PATCHv10 07/41] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv10 08/41] clk: ti: add support for TI fixed factor clock   Tero Kristo
• [PATCHv10 09/41] CLK: TI: add support for gate clock   Tero Kristo
• [PATCHv10 10/41] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv10 11/41] clk: ti: add support for basic mux clock   Tero Kristo
• [PATCHv10 12/41] CLK: TI: add omap4 clock init file   Tero Kristo
• [PATCHv10 13/41] CLK: TI: add omap5 clock init file   Tero Kristo
• [PATCHv10 14/41] CLK: TI: omap5: Initialize USB_DPLL at boot   Tero Kristo
• [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support   Tero Kristo
• [PATCHv10 16/41] CLK: TI: add dra7 clock init file   Tero Kristo
• [PATCHv10 17/41] CLK: TI: add am33xx clock init file   Tero Kristo
• [PATCHv10 18/41] CLK: TI: add interface clock support for OMAP3   Tero Kristo
• [PATCHv10 19/41] CLK: TI: add omap3 clock init file   Tero Kristo
• [PATCHv10 20/41] CLK: TI: add am43xx clock init file   Tero Kristo
• [PATCHv10 21/41] ARM: dts: omap4 clock data   Tero Kristo
• [PATCHv10 22/41] ARM: dts: omap5 clock data   Tero Kristo
• [PATCHv10 23/41] ARM: dts: dra7 clock data   Tero Kristo
• [PATCHv10 24/41] ARM: dts: clk: Add apll related clocks   Tero Kristo
• [PATCHv10 25/41] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock   Tero Kristo
• [PATCHv10 26/41] ARM: dts: DRA7: Add PCIe related clock nodes   Tero Kristo
• [PATCHv10 27/41] ARM: dts: am33xx clock data   Tero Kristo
• [PATCHv10 28/41] ARM: dts: omap3 clock data   Tero Kristo
• [PATCHv10 29/41] ARM: dts: AM35xx: use DT clock data   Tero Kristo
• [PATCHv10 30/41] ARM: dts: am43xx clock data   Tero Kristo
• [PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap   Tero Kristo
• [PATCHv10 32/41] ARM: OMAP2+: clock: use driver API instead of direct memory read/write   Tero Kristo
• [PATCHv10 33/41] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm   Tero Kristo
• [PATCHv10 34/41] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name   Tero Kristo
• [PATCHv10 35/41] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Tero Kristo
• [PATCHv10 36/41] ARM: OMAP2+: io: use new clock init API   Tero Kristo
• [PATCHv10 37/41] ARM: OMAP4: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv10 38/41] ARM: OMAP: DRA7: Enable clock init   Tero Kristo
• [PATCHv10 39/41] ARM: AM43xx: Enable clock init   Tero Kristo
• [PATCHv10 40/41] ARM: AM33xx: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available   Tero Kristo
• [PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available   Tero Kristo
• [PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap   Tero Kristo
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv10 15/41] CLK: TI: DRA7: Add APLL support   Tero Kristo
• [PATCH 1/4] ARM/serial: at91: move machine quirk into machine   Greg Kroah-Hartman
• [PATCH 3.10 33/74] clockevents: Sanitize ticks to nsec conversion   Greg Kroah-Hartman
• [PATCH 3.10 35/74] scripts/kallsyms: filter symbols not in kernel address space   Greg Kroah-Hartman
• [PATCH 3.4 12/26] clockevents: Sanitize ticks to nsec conversion   Greg Kroah-Hartman
• [PATCH 3.11 46/94] clockevents: Sanitize ticks to nsec conversion   Greg Kroah-Hartman
• [PATCH 3.11 48/94] scripts/kallsyms: filter symbols not in kernel address space   Greg Kroah-Hartman
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Greg Kroah-Hartman
• [PATCH 21/31] staging: nvec: use reset framework   Greg Kroah-Hartman
• [PATCH 25/31] serial: tegra: convert to standard DMA DT bindings   Greg Kroah-Hartman
• [PATCH 24/31] serial: tegra: use reset framework   Greg Kroah-Hartman
• [PATCH 27/31] USB: EHCI: tegra: use reset framework   Greg Kroah-Hartman
• Patches from ARM folks solicited for the -stable tree   Greg Kroah-Hartman
• [PATCH] CMA: Fix the phys_addr_t print types   Greg Kroah-Hartman
• [PATCH] CMA: Fix the phys_addr_t print types   Greg Kroah-Hartman
• [PATCH] CMA: Fix the phys_addr_t print types   Greg Kroah-Hartman
• [PATCH V2] serial: tegra: convert to standard DMA DT bindings   Greg Kroah-Hartman
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Greg Kroah-Hartman
• [RESEND PATCH 1/4] i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver   Tim Kryger
• [PATCH 1/3] ARM: bcm: Remove non-existent GENERIC_TIME   Tim Kryger
• [RESEND PATCH 2/4] i2c: i2c-bcm-kona: Add support for high-speed mode   Tim Kryger
• [RESEND PATCH 2/4] i2c: i2c-bcm-kona: Add support for high-speed mode   Tim Kryger
• [RESEND PATCH v2 1/6] ARM: dts: Declare clocks as fixed on bcm11351   Tim Kryger
• [PATCH] ARM: dts: bcm28155-ap: Fix Card Detection GPIO   Tim Kryger
• [PATCH v3 0/8] Update Kona drivers to use clocks   Tim Kryger
• [PATCH v3 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Tim Kryger
• [PATCH v3 2/8] ARM: dts: Specify clocks for UARTs on bcm11351   Tim Kryger
• [PATCH v3 3/8] Documentation: dt: kona-sdhci: Add clocks property   Tim Kryger
• [PATCH v3 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351   Tim Kryger
• [PATCH v3 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Tim Kryger
• [PATCH v3 6/8] Documentation: dt: kona-timer: Add clocks property   Tim Kryger
• [PATCH v3 7/8] clocksource: kona: Add basic use of external clock   Tim Kryger
• [PATCH v3 8/8] ARM: dts: Specify clocks for timer on bcm11351   Tim Kryger
• [PATCH v2 0/5] Add-Broadcom-Kona-I2C-Support   Tim Kryger
• [PATCH v2 1/5] Documentation: dt: Add i2c-bcm-kona binding   Tim Kryger
• [PATCH v2 2/5] i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver   Tim Kryger
• [PATCH v2 3/5] i2c: i2c-bcm-kona: Add support for high-speed mode   Tim Kryger
• [PATCH v2 4/5] ARM: dts: bcm281xx: Add i2c busses   Tim Kryger
• [PATCH v2 5/5] ARM: dts: bcm28155-ap: Enable all the i2c busses   Tim Kryger
• [PATCH v2 0/5] Add-Broadcom-Kona-I2C-Support   Tim Kryger
• [PATCH 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [PATCH 1/5] Documentation: dt: Add kona-pwm binding   Tim Kryger
• [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [PATCH 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [PATCH 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH 1/5] Documentation: dt: Add kona-pwm binding   Tim Kryger
• [PATCH 1/5] Documentation: dt: Add kona-pwm binding   Tim Kryger
• [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Tim Kryger
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Tim Kryger
• [PATCH 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Ganapat Rao P Kulkarni
• [PATCH 1/1] ARM: EXYNOS: Add default latency values for Device and Power Domain   Prasanna Kumar
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Viresh Kumar
• [PATCH] cpufreq, highbank: enable ECME thermal notifications   Viresh Kumar
• [PATCH 2/3] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar
• [PATCH 2/3] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar
• [PATCH V2 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar
• [PATCH V2 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar
• [PATCH V2] i2c: s3c2410 : Add polling mode support   Yuvaraj Kumar
• [PATCH 1/3] ARM: EXYNOS: pmu: Constify data tables   Daniel Kurtz
• [PATCH 2/3] ARM: SAMSUNG: Let s3c_pm_do_restore_*() take const sleep_save   Daniel Kurtz
• [PATCH 3/3] ARM: EXYNOS: Constify clksrc immutable register restore tables   Daniel Kurtz
• [PATCH 0/3] Kesytone II USB support   WingMan Kwok
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   WingMan Kwok
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   WingMan Kwok
• [PATCH 3/3] ARM: keystone: defconfig: enable USB host mode support   WingMan Kwok
• [PATCH v10 00/20] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v10 00/20] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Cho KyongHo
• [PATCH v4 0/6] gpio: daVinci: Fixes and feature enhancement   Lad, Prabhakar
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Lad, Prabhakar
• [PATCH v4 2/6] gpio: davinci: remove unnecessary printk   Lad, Prabhakar
• [PATCH v4 3/6] gpio: davinci: use irqdomain   Lad, Prabhakar
• [PATCH v4 4/6] gpio: davinci: add OF support   Lad, Prabhakar
• [PATCH v4 5/6] ARM: davinci: da850: add GPIO DT node   Lad, Prabhakar
• [PATCH v4 6/6] ARM: davinci: da850 evm: add GPIO pinumux entries DT node   Lad, Prabhakar
• [PATCH v3 1/3] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v4 3/6] gpio: davinci: use irqdomain   Prabhakar Lad
• [PATCH v4 4/6] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Prabhakar Lad
• [PATCH v4 4/6] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Prabhakar Lad
• [PATCH 0/2] DaVinci: GPIO: fixes   Prabhakar Lad
• [PATCH 1/2] gpio: davinci: Fix a check for unbanked gpio   Prabhakar Lad
• [PATCH 2/2] ARM: davinci: Fix number of resources passed to davinci_gpio_register() call   Prabhakar Lad
• [PATCH v5 0/7] gpio: daVinci: cleanup and feature enhancement   Prabhakar Lad
• [PATCH v5 1/7] gpio: davinci: remove unnecessary printk   Prabhakar Lad
• [PATCH v5 2/7] gpio: davinci: use readl/writel instead of __raw_*   Prabhakar Lad
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Prabhakar Lad
• [PATCH v5 4/7] gpio: davinci: remove unused variable intc_irq_num   Prabhakar Lad
• [PATCH v5 5/7] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v5 6/7] ARM: davinci: da850: add GPIO DT node   Prabhakar Lad
• [PATCH v5 7/7] ARM: davinci: da850 evm: add GPIO pinumux entries DT node   Prabhakar Lad
• [PATCH v5 5/7] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v5 1/7] gpio: davinci: remove unnecessary printk   Prabhakar Lad
• [PATCH v6 0/6] gpio: daVinci: cleanup and feature enhancement   Prabhakar Lad
• [PATCH v6 1/6] gpio: davinci: use readl/writel instead of __raw_*   Prabhakar Lad
• [PATCH v6 2/6] This patch converts the davinci gpio driver to use irqdomain support.   Prabhakar Lad
• [PATCH v6 3/6] gpio: davinci: remove unused variable intc_irq_num   Prabhakar Lad
• [PATCH v6 4/6] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v6 5/6] ARM: davinci: da850: add GPIO DT node   Prabhakar Lad
• [PATCH v6 6/6] ARM: davinci: da850 evm: add GPIO pinumux entries DT node   Prabhakar Lad
• [PATCH v6 1/6] gpio: davinci: use readl/writel instead of __raw_*   Prabhakar Lad
• [PATCH v6 4/6] gpio: davinci: add OF support   Prabhakar Lad
• [PATCH v6 1/6] gpio: davinci: use readl/writel instead of __raw_*   Prabhakar Lad
• [PATCH v6 0/6] gpio: daVinci: cleanup and feature enhancement   Prabhakar Lad
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   David Laight
• [PATCH] Documentation/Changes: update binutils version requirement for ARMv7 builds   Rob Landley
• [PATCH] cpufreq, highbank: enable ECME thermal notifications   Mark Langsdorf
• [Cocci] Warning masked by BUG() when CONFIG_BUG is enabled   Julia Lawall
• [PATCH] ARM: mm: Ensure get_unmapped_area() returns higher address than mmap_min_addr   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• [PATCH] arm64: emulate aarch32 CP15 barriers if needed   Ming Lei
• [PATCH] arm64: emulate aarch32 CP15 barriers if needed   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• [PATCH 0/2] ARM & scripts: fix kallsyms regression   Ming Lei
• [PATCH 0/2] ARM & scripts: fix kallsyms regression   Ming Lei
• [PATCH 1/2] ARM: default PHYS_OFFSET if !MMU   Ming Lei
• [PATCH 2/2] scripts/link-vmlinux.sh: only filter kernel symbols for arm   Ming Lei
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Ming Lei
• [PATCH boot-wrapper-aarch64] Add CFLAGS to makefile compile   Geoff Levand
• [PATCH 0/2] More Allwinner SoC timer fixes   Daniel Lezcano
• [RFC PATCH 1/3] ARM: imx: cpuidle: Convert imx5 driver to platform driver   Daniel Lezcano
• [RFC PATCH 2/3] ARM: imx: cpuidle: Convert imx6q driver to platform_driver   Daniel Lezcano
• [PATCH V3] ARM: trace: Add tracepoint for the Inter Processor Interrupt   Daniel Lezcano
• [PATCH 1/2] clockevent: sun4i: Fill the irq field in the clockevent structure   Daniel Lezcano
• [PATCH 2/2] clocksource: sun4i: change CPU mask to cpu_possible_mask   Daniel Lezcano
• [PATCH v2 0/5] Allwinner SoCs High Speed Timer support   Daniel Lezcano
• [PATCH v2 2/2] clocksource: sh_tmu: Add clk_prepare/unprepare support   Daniel Lezcano
• [PATCH v2 1/2] clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails   Daniel Lezcano
• [PATCH v2 2/2] clocksource: sh_mtu2: Add clk_prepare/unprepare support   Daniel Lezcano
• [PATCH v2 1/2] clocksource: sh_tmu: Release clock when sh_tmu_register() fails   Daniel Lezcano
• [PATCH v2 2/2] clocksource: sh_tmu: Add clk_prepare/unprepare support   Daniel Lezcano
• [RESEND PATCH v2 1/6] ARM: dts: Declare clocks as fixed on bcm11351   Daniel Lezcano
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Daniel Lezcano
• [PATCH 1/7] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Daniel Lezcano
• [PATCH 3/7] clocksource/cadence_ttc: Store timer frequency in driver data   Daniel Lezcano
• [PATCH 4/7] clocksource/cadence_ttc: Adjust interval in clock notifier   Daniel Lezcano
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Daniel Lezcano
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Daniel Lezcano
• [GIT PULL] clockevents/clocksource: 3.12 fixes   Daniel Lezcano
• [PATCH 5/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Daniel Lezcano
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Daniel Lezcano
• [PATCH V3] ARM: trace: Add tracepoint for the Inter Processor Interrupt   Daniel Lezcano
• [PATCH 1/2] ARM: ux500: decomission the non-DT MTU init sequence   Daniel Lezcano
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Daniel Lezcano
• [PATCH 1/2] ARM: ux500: decomission the non-DT MTU init sequence   Daniel Lezcano
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Daniel Lezcano
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Daniel Lezcano
• [PATCH V3] ARM: trace: Add tracepoint for the Inter Processor Interrupt   Daniel Lezcano
• [GIT PULL]clocksource: dw_apb_timer_of: Fix read_sched_clock   Daniel Lezcano
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Daniel Lezcano
• [PATCH] clocksource: armada-370-xp: Register sched_clock after the counter reset   Daniel Lezcano
• [PATCH] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Daniel Lezcano
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Daniel Lezcano
• No subject   Xiubo Li
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Xiubo Li
• [PATCHv2 2/8] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Xiubo Li
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv2 4/8] Documentation: Add device tree bindings for Freescale SAI.   Xiubo Li
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Xiubo Li
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Xiubo Li
• [PATCHv2 7/8] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610.   Xiubo Li
• [PATCHv2 8/8] Documentation: Add device tree bindings for Freescale VF610 sound.   Xiubo Li
• [PATCHv6 0/4] Add Freescale FTM PWM driver.   Xiubo Li
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv6 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li
• [PATCHv6 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv6 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li
• [PATCH 0/3] *** Support SMBIOS/DMI on arm32/64 ***   Yi Li
• [PATCH 1/3] firmware/dmi_scan: generalize for use by other archs   Yi Li
• [PATCH 2/3] ARM64:DMI: Add smbios/dmi support on arm64   Yi Li
• [PATCH 3/3] ARM32:DMI: Add smbios/dmi support on arm32   Yi Li
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Zhong Li
• [alsa-devel] Bug? Sound support for at91sam9x5-wm8731 based boards   Zhong Li
• [PATCH] ARM: pcm037: convert custom GPIO-based power function to a regulator   Guennadi Liakhovetski
• [Q] PL011 DMA Rx, using ste_dma40   Guennadi Liakhovetski
• [Q] PL011 DMA Rx, using ste_dma40   Guennadi Liakhovetski
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Grant Likely
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Grant Likely
• Raw notes from ARM summit.   Grant Likely
• Report from 2013 ARM kernel summit   Grant Likely
• Report from 2013 ARM kernel summit   Grant Likely
• [PATCH] phy: Add MOXA RTL8201CP PHY support   Grant Likely
• address translation for PCIe-to-localbus bridge   Grant Likely
• address translation for PCIe-to-localbus bridge   Grant Likely
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Grant Likely
• arm/arm64 UEFI boot protocol   Grant Likely
• address translation for PCIe-to-localbus bridge   Grant Likely
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Grant Likely
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Grant Likely
• Report from 2013 ARM kernel summit   Grant Likely
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Grant Likely
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Grant Likely
• UEFI Clock   Grant Likely
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Grant Likely
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Grant Likely
• ARM topic: Is DT on ARM the solution, or is there something better?   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Grant Likely
• ARM topic: Is DT on ARM the solution, or is there something better?   Grant Likely
• [RFC PATCH V2 1/2] dtc: add 'compat' output option, prints board string   Grant Likely
• [RFC PATCH V3 1/2] scripts: dtc: build fdtget for extracting properties from dtbs   Grant Likely
• [RFC PATCH V3 2/2] kbuild: dtbs_install: new make target   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• [PATCH 0/2] Revert support for reserved memory regions defined in device tree   Grant Likely
• [PATCH 0/2] Revert support for reserved memory regions defined in device tree   Grant Likely
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Grant Likely
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Grant Likely
• [PATCH V4] kbuild: dtbs_install: new make target   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• [PATCH V4] kbuild: dtbs_install: new make target   Grant Likely
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Grant Likely
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Grant Likely
• [PATCH] ARM: CCI : Fix implicit declaration of function error   Grant Likely
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Grant Likely
• [PATCHv5 4/9] iommu/tegra: smmu: register device to iommu dynamically   Grant Likely
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• ACPI vs DT at runtime   Grant Likely
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Grant Likely
• [PATCH V5] kbuild: dtbs_install: new make target   Grant Likely
• [PATCH V5] kbuild: dtbs_install: new make target   Grant Likely
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Grant Likely
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Grant Likely
• ACPI   Grant Likely
• ACPI   Grant Likely
• ACPI   Grant Likely
• ACPI   Grant Likely
• ACPI   Grant Likely
• ACPI   Grant Likely
• [PATCH 2/3] ARM64:DMI: Add smbios/dmi support on arm64   Grant Likely
• [PATCH 2/3] ARM64:DMI: Add smbios/dmi support on arm64   Grant Likely
• [PATCH 3/3] ARM32:DMI: Add smbios/dmi support on arm32   Grant Likely
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Grant Likely
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Grant Likely
• ACPI   Grant Likely
• OV5642 device driver for linux 2.6.39 and Atmel ISI   Marcio Lima
• [PATCH] irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• [PATCH] ARM: nommu: Include asm/procinfo.h to fix build warning   Axel Lin
• ARM: nommu: DEBUG_LOCKS_WARN_ON(!depth)   Axel Lin
• ARM: nommu: Boot hang after VFS: Mounted root (ext2 filesystem) on device 1:0.   Axel Lin
• ARM: nommu: Boot hang after VFS: Mounted root (ext2 filesystem) on device 1:0.   Axel Lin
• ARM: nommu: Unable to allocate RAM for process text/data, errno 12   Axel Lin
• ARM: nommu: Unable to allocate RAM for process text/data, errno 12   Axel Lin
• [PATCH v2] serial: omap: Add support for optional wake-up   Tony Lindgren
• [PATCH v2] serial: omap: Add support for optional wake-up   Tony Lindgren
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Tony Lindgren
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Tony Lindgren
• [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3   Tony Lindgren
• [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3   Tony Lindgren
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Tony Lindgren
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Tony Lindgren
• [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: move gpmc headers to include/linux/platform_data   Tony Lindgren
• [PATCH] ARM: omap: fix warning with LPAE build   Tony Lindgren
• [PATCH] ARM: omap: fix warning with LPAE build   Tony Lindgren
• [PATCH 0/8] Various omap device tree usability fixes for v3.13 merge window   Tony Lindgren
• [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree   Tony Lindgren
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Tony Lindgren
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Tony Lindgren
• [PATCH 6/8] gpio: twl4030: Fix passing of pdata in the device tree case   Tony Lindgren
• [PATCH 7/8] ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x   Tony Lindgren
• [PATCH 8/8] ARM: dts: Fix omap2 specific dtsi files by adding the missing entries   Tony Lindgren
• [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable   Tony Lindgren
• [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree   Tony Lindgren
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Tony Lindgren
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Tony Lindgren
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Tony Lindgren
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Tony Lindgren
• [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed   Tony Lindgren
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle   Tony Lindgren
• [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clock fixes for v3.13   Tony Lindgren
• [PATCH] ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()   Tony Lindgren
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Tony Lindgren
• [PATCH] ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()   Tony Lindgren
• [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio   Tony Lindgren
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Tony Lindgren
• [PATCH 00/11] Make omap24xx booting device tree based for v3.14 merge window   Tony Lindgren
• [PATCH 01/11] ARM: dts: Add basic device tree support for omap2430 sdp   Tony Lindgren
• [PATCH 02/11] ARM: dts: Add basic Nokia N8X0 support   Tony Lindgren
• [PATCH 03/11] ARM: OMAP2+: Add support for board specific auxdata quirks   Tony Lindgren
• [PATCH 04/11] ARM: OMAP2+: Add device tree compatible revision checks for n8x0   Tony Lindgren
• [PATCH 05/11] ARM: OMAP2+: Make n8x0 behave better with device tree based booting   Tony Lindgren
• [PATCH 06/11] ARM: OMAP2+: Add quirks support for n8x0   Tony Lindgren
• [PATCH 07/11] ARM: OMAP2+: Remove legacy booting support for n8x0   Tony Lindgren
• [PATCH 08/11] ARM: OMAP2+: Remove board file for H4   Tony Lindgren
• [PATCH 09/11] ARM: OMAP2+: Remove legacy board file for 2430sdp   Tony Lindgren
• [PATCH 10/11] ARM: OMAP2+: Remove legacy mux code for omap2   Tony Lindgren
• [PATCH 11/11] ARM: OMAP2+: Remove legacy hwmod entries for omap2   Tony Lindgren
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Tony Lindgren
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle   Tony Lindgren
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix build for dra7xx without omap4 and 5   Tony Lindgren
• [PATCH 00/11] Make omap24xx booting device tree based for v3.14 merge window   Tony Lindgren
• [GIT PULL] omap fixes for v3.13 merge window   Tony Lindgren
• [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio   Tony Lindgren
• [PATCH 0/5] Prepare making omap3 device tree only and convert LDP   Tony Lindgren
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Tony Lindgren
• [PATCH 2/5] ARM: OMAP2+: Add support for legacy auxdata for twl   Tony Lindgren
• [PATCH 3/5] ARM: OMAP2+: Add DT init code for DPI displays and make omap3 LDP to use it   Tony Lindgren
• [PATCH 4/5] ARM: dts: Add basic support for omap3 LDP zoom1 labrador   Tony Lindgren
• [PATCH 5/5] ARM: OMAP2+: Remove legacy booting support for LDP   Tony Lindgren
• N900 board code in 3.14   Tony Lindgren
• [PATCH 00/11]: add remaining support for IGEP boards   Tony Lindgren
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Tony Lindgren
• [PATCH 4/5] ARM: dts: Add basic support for omap3 LDP zoom1 labrador   Tony Lindgren
• [PATCH 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.   Tony Lindgren
• [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable   Tony Lindgren
• [PATCH 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.   Tony Lindgren
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Tony Lindgren
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Tony Lindgren
• [PATCH 3/5] ARM: OMAP2+: Add DT init code for DPI displays and make omap3 LDP to use it   Tony Lindgren
• [PATCH 6/8] gpio: twl4030: Fix passing of pdata in the device tree case   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [BUG] PandaBoard hangs before starting init while booting v3.12   Tony Lindgren
• [PATCH] ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain   Tony Lindgren
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Tony Lindgren
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix undefined reference to set_cntfreq   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix undefined reference to set_cntfreq   Tony Lindgren
• [PATCH 0/2] Remove some dead code for omaps   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Remove legacy mux code for display.c   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init   Tony Lindgren
• [GIT PULL] few more omap fixes for v3.13 merge window   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [BUG] PandaBoard hangs before starting init while booting v3.12   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Tony Lindgren
• [PATCH 0/3] Yet more fixes for booting omaps with device tree   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2+: Fix more missing data for omap3.dtsi file   Tony Lindgren
• [PATCH 2/3] ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Fix eMMC on n900 with device tree   Tony Lindgren
• N900 board code in 3.14   Tony Lindgren
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Fix eMMC on n900 with device tree   Tony Lindgren
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Tony Lindgren
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Tony Lindgren
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Tony Lindgren
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Fix eMMC on n900 with device tree   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH 6/8] devicetree: doc: Document ti,timer-parent property   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH] ARM: dts: Fix omap serial wake-up when booted with device tree   Tony Lindgren
• [PATCH 5/7] ARM: OMAP4: hwmod: add hwmod data for DES IP   Tony Lindgren
• [PATCH 0/7] AES/DES hwmod data and dmtimer fix   Tony Lindgren
• [PATCH 6/7] ARM: OMAP: Disable POSTED mode for errata i103 and i767   Tony Lindgren
• [PATCH 1/5] mfd: twl-core: Fix passing of platform data in the device tree case   Tony Lindgren
• Status of 1GHz support on am37xx   Tony Lindgren
• [PATCH] ARM: OMAP: dts: add n8x0 onenand   Tony Lindgren
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Tony Lindgren
• [PATCH 02/12] ARM: OMAP2+: Remove legacy serial.c   Tony Lindgren
• [PATCH 03/12] ARM: OMAP2+: Remove legacy hsmmc.c   Tony Lindgren
• [PATCH 04/12] ARM: OMAP2+: Remove legacy i2c.c platform init code   Tony Lindgren
• [PATCH 05/12] ARM: OMAP2+: Remove legacy PM init   Tony Lindgren
• [PATCH 06/12] ARM: OMAP2+: Remove legacy twl4030 platform init code   Tony Lindgren
• [PATCH 07/12] ARM: OMAP2+: Remove legacy usb-host.c platform init code   Tony Lindgren
• [PATCH 08/12] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c   Tony Lindgren
• [PATCH 09/12] ARM: OMAP2+: Remove legacy usb-musb.c platform init code   Tony Lindgren
• [PATCH 10/12] ARM: OMAP2+: Remove legacy hwmod mux code   Tony Lindgren
• [PATCH 12/12] ARM: OMAP2+: Remove legacy data from hwmod for omap3   Tony Lindgren
• [PATCH 01/12 diet] ARM: OMAP2+: Remove legacy omap3 board-*.c files and make mach-omap2 DT only for booting   Tony Lindgren
• [PATCH 11/12 diet] ARM: OMAP2+: Remove legacy mux code   Tony Lindgren
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Tony Lindgren
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Tony Lindgren
• [PATCHv10 31/41] ARM: OMAP2+: clock: add support for regmap   Tony Lindgren
• [PATCHv10 41/41] ARM: OMAP3: use DT clock init if DT data is available   Tony Lindgren
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Tony Lindgren
• [BUG] PandaBoard hangs before starting init while booting v3.12   Tony Lindgren
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Tony Lindgren
• [BUG] PandaBoard hangs before starting init while booting v3.12   Tony Lindgren
• [PATCH 1/8] ARM: OMAP: Move public portion of dmtimer.h to include/linux/omap-timer.h   Tony Lindgren
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support   Tony Lindgren
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Tony Lindgren
• [PATCH 6/7] ARM: OMAP: Disable POSTED mode for errata i103 and i767   Tony Lindgren
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Tony Lindgren
• [PATCH v2 00/11]: add remaining support for IGEP boards   Tony Lindgren
• [PATCH 05/12] ARM: OMAP2+: Remove legacy PM init   Tony Lindgren
• [PATCH 11/12 diet] ARM: OMAP2+: Remove legacy mux code   Tony Lindgren
• [PATCH] ARM: Kill CONFIG_MTD_PARTITIONS   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [GIT PULL] omap fixes against v3.13-rc1   Tony Lindgren
• [GIT PULL] omap fixes against v3.13-rc1   Tony Lindgren
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Tony Lindgren
• [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [PATCH 01/12 diet] ARM: OMAP2+: Remove legacy omap3 board-*.c files and make mach-omap2 DT only for booting   Tony Lindgren
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Tony Lindgren
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Tony Lindgren
• arm/arm64 UEFI boot protocol   Leif Lindholm
• arm/arm64 UEFI boot protocol   Leif Lindholm
• arm/arm64 UEFI boot protocol   Leif Lindholm
• [PATCH v2 0/3] arm: [U]EFI runtime services support   Leif Lindholm
• ACPI vs DT at runtime   Leif Lindholm
• ACPI vs DT at runtime   Leif Lindholm
• ACPI vs DT at runtime   Leif Lindholm
• ACPI vs DT at runtime   Leif Lindholm
• ACPI   Leif Lindholm
• [PATCH v3 0/3] (U)EFI runtime services for arm   Leif Lindholm
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Leif Lindholm
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Leif Lindholm
• [PATCH v3 3/3] init: efi: arm: enable (U)EFI runtime services on arm   Leif Lindholm
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Leif Lindholm
• [PATCH v3 0/3] (U)EFI runtime services for arm   Leif Lindholm
• ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Alex Ling
• [PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Alex Ling
• [PATCH 4/4] ARM: sa1100: switch to COMMON_CLK framework   Russell King - ARM Linux
• [PATCH 00/11] RFC: Common machine reset handling   Russell King - ARM Linux
• [PATCH] ARM: footbridge: fix build warning   Russell King - ARM Linux
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Russell King - ARM Linux
• [PATCHv4][ 1/6] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*   Russell King - ARM Linux
• [PATCH 2/3] ARM: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case   Russell King - ARM Linux
• [PATCH 0/3] follow up fixes for V7 big endian changes   Russell King - ARM Linux
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Russell King - ARM Linux
• mm: get_user_pages_fast()   Russell King - ARM Linux
• [PATCH] clk: divider: fix rate calculation for fractional rates   Russell King - ARM Linux
• omap2plus_defconfig build failure in v3.12   Russell King - ARM Linux
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Russell King - ARM Linux
• [PATCH] clk: divider: fix rate calculation for fractional rates   Russell King - ARM Linux
• [PATCH 1/1] arm mach-at91: add support for Cosino board series by HCE Engineering   Russell King - ARM Linux
• mm: get_user_pages_fast()   Russell King - ARM Linux
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Russell King - ARM Linux
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Russell King - ARM Linux
• [PATCH 1/7] ARM: ux500: Remove legacy ATAG SSP support   Russell King - ARM Linux
• imx-drm: Add HDMI support   Russell King - ARM Linux
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Russell King - ARM Linux
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Russell King - ARM Linux
• [PATCH] dmaengine: Add support for BCM2835.   Russell King - ARM Linux
• [PATCH] ARM: Support arch_irq_work_raise() via self IPIs   Russell King - ARM Linux
• imx-drm: Add HDMI support   Russell King - ARM Linux
• imx-drm: Add HDMI support   Russell King - ARM Linux
• [GIT PULL] prefetch support for 3.13   Russell King - ARM Linux
• imx-drm: possible circular locking dependency detected   Russell King - ARM Linux
• [PATCHv2] dmaengine: Add support for BCM2835.   Russell King - ARM Linux
• kernel BUG at kernel/kallsyms.c:222!   Russell King - ARM Linux
• [RFC 0/4] Intermix Lowmem and vmalloc   Russell King - ARM Linux
• [PATCH 1/5] arm: sa1100: add cpu clock   Russell King - ARM Linux
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Russell King - ARM Linux
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Russell King - ARM Linux
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Russell King - ARM Linux
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Russell King - ARM Linux
• [Xen-devel] [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Russell King - ARM Linux
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Russell King - ARM Linux
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Russell King - ARM Linux
• [PATCHv3 1/8] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*   Russell King - ARM Linux
• [PATCHv3] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• [PATCHv3 1/8] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*   Russell King - ARM Linux
• [PATCHv4][ 3/7] staging: imx-drm: Add RGB666 support for parallel display.   Russell King - ARM Linux
• [PATCH 2/2] ARM: highbank: only select errata 764369 if SMP   Russell King - ARM Linux
• [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub   Russell King - ARM Linux
• a bug on NO_HZ_FULL_ALL   Russell King - ARM Linux
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Russell King - ARM Linux
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Russell King - ARM Linux
• [PATCH] ARM: nommu: Include asm/procinfo.h to fix build warning   Russell King - ARM Linux
• [PATCH 3/8] ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups   Russell King - ARM Linux
• [PATCH 2/2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Russell King - ARM Linux
• [PATCH 2/2] ARM: pxa: delete the custom GPIO header   Russell King - ARM Linux
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Russell King - ARM Linux
• Some question about GIC v1 setting   Russell King - ARM Linux
• [PATCHv5] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• [PATCHv5] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• [PATCHv5] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• [PATCH] ARM: fix /proc/$PID/stack to work on SMP   Russell King - ARM Linux
• [PATCH] ARM: dts: imx6qdl: disable spdif "rxtx5" clock option   Russell King - ARM Linux
• Warning masked by BUG() when CONFIG_BUG is enabled   Russell King - ARM Linux
• [PATCH 1/3] arm: delete __cpuinit/__CPUINIT usage from all ARM users   Russell King - ARM Linux
• [PATCH 1/3] arm: delete __cpuinit/__CPUINIT usage from all ARM users   Russell King - ARM Linux
• ARM topic: Is DT on ARM the solution, or is there something better?   Russell King - ARM Linux
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Russell King - ARM Linux
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Russell King - ARM Linux
• [PATCHv7] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• ARM topic: Is DT on ARM the solution, or is there something better?   Russell King - ARM Linux
• [PATCH] ARM: move firmware_ops to drivers/firmware   Russell King - ARM Linux
• [PATCH] ARM: move firmware_ops to drivers/firmware   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Russell King - ARM Linux
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• [PATCH 5/5] arm: Enable IRQs before attempting to read user space in __und_usr   Russell King - ARM Linux
• CMA on AArch64   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• ACPI vs DT at runtime   Russell King - ARM Linux
• [PATCH 7/9] ARM: sa1100: move gpio irq handling to GPIO driver   Russell King - ARM Linux
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Russell King - ARM Linux
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Russell King - ARM Linux
• [PATCH 7/9] ARM: sa1100: move gpio irq handling to GPIO driver   Russell King - ARM Linux
• crypto dependency in bit sliced AES   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Russell King - ARM Linux
• crypto dependency in bit sliced AES   Russell King - ARM Linux
• [GIT PULL] prefetch support for 3.13   Russell King - ARM Linux
• [PATCH] ARM: pxa: Move iotable mapping inside vmalloc region   Russell King - ARM Linux
• ARM: v3.13-rc1: USB regression   Russell King - ARM Linux
• OMAP build failure after this merge window - caused by usb or phy Kconfig krap   Russell King - ARM Linux
• ARM: v3.13-rc1: USB regression   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• clk: clk_round_rate() should return 0, not negative numbers, upon error   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• STOP THE MADNESS   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• Fwd: [PATCH] Fix pl08x warnings   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• KNOT / CONTINUOUS (was: [PATCH] ASoC: kirkwood: Fix invalid SPDIF format)   Russell King - ARM Linux
• [PATCH] Versatile LEDs initialise to off state   Russell King - ARM Linux
• [PATCH] ARM: asm: Configure caches as per the defconfig   Russell King - ARM Linux
• [PATCH] Versatile LEDs initialise to off state   Russell King - ARM Linux
• [Q] PL011 DMA Rx, using ste_dma40   Russell King - ARM Linux
• [PATCH] ARM: asm: Configure caches as per the defconfig   Russell King - ARM Linux
• STOP THE MADNESS   Russell King - ARM Linux
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Russell King - ARM Linux
• STOP THE MADNESS   Russell King - ARM Linux
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Russell King - ARM Linux
• [RFC] ARM: lib: delay-loop: Add align directive to fix BogoMIPS calculation   Russell King - ARM Linux
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Russell King - ARM Linux
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   John W. Linville
• [PATCH] ARM: dts: voipac: Improve fixed voltage regulator definition   Rostislav Lisovy
• [PATCH 0/2] ARM: i.MX53: voipac-dmm-668 Devicetree   Rostislav Lisovy
• [PATCH 1/2] ARM: i.MX53: dts: NAND flash controller   Rostislav Lisovy
• [PATCH 2/2] ARM: i.MX53: dts: USB host controller   Rostislav Lisovy
• [PATCH] ath6kl: sdio: fix system panic when doing wifi stress test   Hui Liu
• [PATCH] ath6kl: sdio: fix system panic when doing wifi stress test   Jason Liu
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v5 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Jiang Liu
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v5 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Jiang Liu
• [PATCH v5 5/7] arm64, jump label: detect %c support for ARM64   Jiang Liu
• [PATCH v5 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v2 05/13] uprobes: add arch write opcode hook   David Long
• [PATCH v2 04/13] uprobes: allow arch-specific initialization   David Long
• [PATCH] uprobes: introduce arch_uprobe->ixol   David Long
• [PATCH] uprobes: introduce arch_uprobe->ixol   David Long
• [PATCH] uprobes: introduce arch_uprobe->ixol   David Long
• [PATCH v2 01/13] uprobes: move function declarations out of arch   David Long
• [PATCH] uprobes: Export write_opcode() as uprobe_write_opcode()   David Long
• [PATCH v2 09/13] ARM: Disable jprobe selftests in thumb kernels   David Long
• [PATCH v2 07/13] ARM: move generic thumb instruction parsing code to new files for use by other features   David Long
• [PATCH v2 08/13] ARM: use a function table for determining instruction interpreter actions   David Long
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   David Long
• [PATCH v2 10/13] kprobes: Remove uneeded kernel dependency on struct arch_specific_insn   David Long
• [PATCH v2 11/13] ARM: Finish renaming ARM kprobes APIs for sharing with uprobes   David Long
• [PATCH v3 00/15] uprobes: Add uprobes support for ARM   David Long
• [PATCH v3 01/15] uprobes: allow ignoring of probe hits   David Long
• [PATCH v3 02/15] ARM: move shared uprobe/kprobe definitions into new include file   David Long
• [PATCH v3 03/15] ARM: Move generic arm instruction parsing code to new files for sharing between features   David Long
• [PATCH v3 04/15] ARM: move generic thumb instruction parsing code to new files for use by other feature   David Long
• [PATCH v3 05/15] ARM: use a function table for determining instruction interpreter actions   David Long
• [PATCH v3 06/15] ARM: Disable jprobes test when built into thumb-mode kernel   David Long
• [PATCH v3 07/15] ARM: Remove use of struct kprobe from generic probes code   David Long
• [PATCH v3 08/15] ARM: Use new opcode type in ARM kprobes/uprobes code   David Long
• [PATCH v3 09/15] ARM: Make the kprobes condition_check symbol names more generic   David Long
• [PATCH v3 10/15] ARM: Change more ARM kprobes symbol names to something more   David Long
• [PATCH v3 11/15] ARM: Rename the shared kprobes/uprobe return value enum   David Long
• [PATCH v3 12/15] ARM: Change the remaining shared kprobes/uprobes symbols to something generic   David Long
• [PATCH v3 13/15] ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions   David Long
• [PATCH v3 14/15] ARM: add uprobes support   David Long
• [PATCH v3 15/15] ARM: Remove uprobes dependency on kprobes   David Long
• [PATCHv7 0/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCHv7 1/3] ARM: imx: Add DMAMUX clock for Vybrid vf610 SoC   Jingchang Lu
• [PATCHv7 2/3] ARM: dts: vf610: Add eDMA node   Jingchang Lu
• [PATCHv7 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCHv7 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v3 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Andrew Lunn
• [PATCH v3 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Andrew Lunn
• [PATCH] ARM: orion5x: drop unused include from common.c   Andrew Lunn
• [PATCH] ARM/serial: at91: specify RTS in DT using gpio   Andrew Lunn
• [RESEND PATCH v2 1/3] irqchip: irq-dove: Add PMU interrupt controller.   Andrew Lunn
• [RESEND PATCH v2 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Andrew Lunn
• [RESEND PATCH v2 3/3] ARM: Dove: Add RTC interrupt via PMU interrupt controller.   Andrew Lunn
• [PATCH] ARM: l2x0: add prefetch and power ctrl registers configuration support   Andrew Lunn
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Andrew Lunn
• [patch 1/1] ARM: kirkwood: stop printk TCLK value at boot for DT boards   Andrew Lunn
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Andrew Lunn
• SPARSE_IRQ on Kirkwood   Andrew Lunn
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Andrew Lunn
• [PATCH] ARM: orion5x: Fix typo in device_type property of phy node   Andrew Lunn
• [PATCH] ARM: dove: Fix typo in device_type property of phy node   Andrew Lunn
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Andrew Lunn
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Andy Lutomirski
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Andy Lutomirski
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Andy Lutomirski
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Andy Lutomirski
• [PATCH v2] seccomp: not compatible with ARM OABI   Andy Lutomirski
• [PATCH v2] seccomp: not compatible with ARM OABI   Andy Lutomirski
• [libseccomp-discuss] [PATCH v2] seccomp: not compatible with ARM OABI   Andy Lutomirski
• MP11 port   Ferrari Dante László
• MP11 port   Ferrari Dante László
• MP11 port   Ferrari Dante László
• [PATCH] ARM: sunxi: dt: add EMAC aliases   Emilio López
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Emilio López
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Emilio López
• [GIT PULL] Allwinner sunXi clock patches for 3.13   Emilio López
• [PATCH] typo fixes (coordiante -> coordinate) in am335x   Jan Lübbe
• [PATCH] typo fixes (coordiante -> coordinate) in am335x   Jan Lübbe
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Pavel Machek
• [PATCH 2/4] wl1251: move power GPIO handling into the driver   Pavel Machek
• [PATCH 3/4] wl1251: spi: add vio regulator support   Pavel Machek
• [RFC 1/4] ASoC: omap: rx51: Use snd_soc_register_card   Pavel Machek
• [RFC 2/4] ARM: OMAP: rx51: Register audio device   Pavel Machek
• [RFC 3/4] ASoC: Allow Aux Codecs to be specified using DT   Pavel Machek
• [RFC 4/4] ASoC: RX-51: Add DT support to sound driver   Pavel Machek
• [RFC 3/4] ASoC: Allow Aux Codecs to be specified using DT   Pavel Machek
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Pavel Machek
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Pavel Machek
• [PATCHv5 10/20] arm: dts: add omap4430 thermal data   Pavel Machek
• Nemo on emulated Nokia n900 (qemu-arm)   Pavel Machek
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v5 00/14] Armada 370/XP NAND support   Daniel Mack
• [PATCH v5 00/14] Armada 370/XP NAND support   Daniel Mack
• [PATCH v5 00/14] Armada 370/XP NAND support   Daniel Mack
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [PATCH v7] ARM: omap: edma: add suspend suspend/resume hooks   Daniel Mack
• [GIT PULL] ep93xx-devel for 3.12   Ryan Mallon
• [PATCH] ARM: ep93xx: remove deprecated IRQF_DISABLED   Ryan Mallon
• [PATCH] arm: ep93xx: use soc bus   Ryan Mallon
• [GIT PULL] ep93xx-devel for 3.12   Ryan Mallon
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Belisko Marek
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Belisko Marek
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Belisko Marek
• [Patch] arm/arm64: Thumb=>ARM signal handling setup skips the a few instructions on Snapdragon S4/Krait   Catalin Marinas
• [PATCH] arm64: enable EDAC on arm64   Catalin Marinas
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Catalin Marinas
• [PATCH] arm64: enable EDAC on arm64   Catalin Marinas
• [PATCH trivial] arm64: constify hwcap_str   Catalin Marinas
• [PATCH trivial] arm64: constify hwcap_str   Catalin Marinas
• [PATCH trivial] arm64: constify hwcap_str   Catalin Marinas
• [GIT PULL] arm64 patches for 3.13   Catalin Marinas
• [PATCH] arm64: emulate aarch32 CP15 barriers if needed   Catalin Marinas
• [PATCH] arm64: emulate aarch32 CP15 barriers if needed   Catalin Marinas
• [PATCH] ARM: rename ioremap_cached to ioremap_cache   Catalin Marinas
• [PATCH 4/4] arm64: advertise CPU features for modalias matching   Catalin Marinas
• change_page_attr() implementation for ARM?   Catalin Marinas
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Catalin Marinas
• [PATCH 4/6] arm64: mm: Drop the lowmem watermark check from virt_addr_valid()   Catalin Marinas
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Catalin Marinas
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] ARM: move firmware_ops to drivers/firmware   Catalin Marinas
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Catalin Marinas
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Catalin Marinas
• CMA on AArch64   Catalin Marinas
• CMA on AArch64   Catalin Marinas
• ACPI vs DT at runtime   Catalin Marinas
• HYP Kernel boot requirements [Was ...Re: [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs]   Catalin Marinas
• HYP Kernel boot requirements   Catalin Marinas
• [PATCH v2] arm64: enable EDAC on arm64   Catalin Marinas
• ACPI   Catalin Marinas
• [PATCH] arm64: mm: Avoid set_pte_at with HugeTLB pages   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.13-rc   Catalin Marinas
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Dave Martin
• [RFC PATCH 2/4] cpu: advertise CPU features over udev in a generic way   Dave Martin
• [PATCH v2] seccomp: not compatible with ARM OABI   Dave Martin
• [PATCH] ARM: kexec: Use the right ISA for relocate_new_kernel   Dave Martin
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Dave Martin
• [PATCH] ARM: unwinder: Handle Stackoverflow in unwind_exec_insn   Dave Martin
• [RFC PATCH 00/11] Embeddable Position Independent Executable   Dave Martin
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Dave Martin
• [PATCH 9/9] ARM: asm/opcodes.h: use ARM_HAVE_INST to use .inst to build instructions   Dave Martin
• [PATCH 8/9] ARM: add test for as supporting '.inst'   Dave Martin
• [PATCH 9/9] ARM: asm/opcodes.h: use ARM_HAVE_INST to use .inst to build instructions   Dave Martin
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Dave Martin
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Dave Martin
• [PATCH v2] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Dave Martin
• [PATCH] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Dave Martin
• [PATCH v2] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Dave Martin
• [PATCH v3] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Dave Martin
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Dave Martin
• [PATCH v4] ARM: signal: fix armv7-m build issue in sigreturn_codes.S   Dave Martin
• [PATCH V3] ARM: trace: Add tracepoint for the Inter Processor Interrupt   Dave Martin
• [PATCH] ARM: unwind: Fix fp/r7 mishandling for Thumb-2   Dave Martin
• [PATCH] ARM: unwinder: Handle Stackoverflow in unwind_exec_insn   Dave Martin
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• MP11 port   Dave Martin
• [PATCH v4 4/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Dave Martin
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Dave Martin
• HYP Kernel boot requirements   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Dave Martin
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow in unwind_exec_insn Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave P Martin
• [PATCH v2] ARM: kexec: Use the right ISA for relocate_new_kernel   Dave P Martin
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave P Martin
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave P Martin
• ACPI vs DT at runtime   Jon Masters
• ACPI vs DT at runtime   Jon Masters
• ACPI vs DT at runtime   Jon Masters
• ACPI vs DT at runtime   Jon Masters
• ACPI   Jon Masters
• ACPI vs DT at runtime   Jon Masters
• ACPI vs DT at runtime   Jon Masters
• ACPI   Jon Masters
• ACPI   Jon Masters
• ACPI   Jon Masters
• ACPI   Jon Masters
• ACPI   Jon Masters
• ACPI   Jon Masters
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Peter Maydell
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Peter Maydell
• [PATCH 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH 2/2] ARM: bcm281xx: watchdog configuration   Markus Mayer
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v3] ARM: bcm: Add DEBUG_LL console support   Markus Mayer
• [PATCH v2 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v2 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v2 2/2] ARM: bcm281xx: watchdog configuration   Markus Mayer
• [PATCH v2 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v2 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v3 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v3 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v3 2/2] ARM: bcm281xx: watchdog configuration   Markus Mayer
• [PATCH v4 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v4 2/2] ARM: bcm281xx: watchdog configuration   Markus Mayer
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v5 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v5 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v5 2/2] ARM: bcm281xx: watchdog configuration   Markus Mayer
• mm: get_user_pages_fast()   Michael McTernan
• mm: get_user_pages_fast()   Michael McTernan
• mm: get_user_pages_fast()   Michael McTernan
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Peter Meerwald
• [PATCH] I2C: BCM2835: Linking platform nodes to adapter nodes   Florian Meier
• [PATCH] dmaengine: Add support for BCM2835.   Florian Meier
• [RFC] ASoC: Add support for BCM2835   Florian Meier
• [PATCH] dmaengine: Add support for BCM2835.   Florian Meier
• [PATCHv2] dmaengine: Add support for BCM2835.   Florian Meier
• [PATCHv3] dmaengine: Add support for BCM2835   Florian Meier
• [RFCv2] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv4] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv5] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv6] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv7] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv7] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv3] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv7] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv3] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv7] dmaengine: Add support for BCM2835   Florian Meier
• [PATCHv3] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv4] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv4] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv5] ASoC: Add support for BCM2835   Florian Meier
• [PATCHv9 06/43] CLK: ti: add init support for clock IP blocks   Nishanth Menon
• [PATCHv9 07/43] CLK: TI: add autoidle support   Nishanth Menon
• [PATCHv9 08/43] clk: ti: add composite clock support   Nishanth Menon
• [PATCHv9 09/43] CLK: ti: add support for ti divider-clock   Nishanth Menon
• [PATCHv9 11/43] CLK: TI: add support for gate clock   Nishanth Menon
• [PATCHv9 12/43] CLK: TI: add support for clockdomain binding   Nishanth Menon
• [PATCHv9 13/43] clk: ti: add support for basic mux clock   Nishanth Menon
• [PATCHv9 38/43] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Nishanth Menon
• [PATCHv9 33/43] ARM: dts: am43xx clock data   Nishanth Menon
• [PATCHv9 32/43] ARM: dts: AM35xx: use DT clock data   Nishanth Menon
• [PATCHv9 00/43] ARM: TI SoC clock DT conversion   Nishanth Menon
• [PATCHv9 07/43] CLK: TI: add autoidle support   Nishanth Menon
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Nishanth Menon
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Nishanth Menon
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH v5] ARM: omap: edma: add suspend suspend/resume hooks   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Nishanth Menon
• [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Nishanth Menon
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Nishanth Menon
• [PATCH] ARM: OMAP4+: pm_debug: provide more visibility into suspend failure   Nishanth Menon
• [PATCH] ARM: OMAP4+: pm_debug: provide more visibility into suspend failure   Nishanth Menon
• cpufreq on PandaBoard   Nishanth Menon
• cpufreq on PandaBoard   Nishanth Menon
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support   Nishanth Menon
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Nishanth Menon
• Status of 1GHz support on am37xx   Nishanth Menon
• [PATCH 05/12] ARM: OMAP2+: Remove legacy PM init   Nishanth Menon
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support   Nishanth Menon
• [PATCH 05/12] ARM: OMAP2+: Remove legacy PM init   Nishanth Menon
• pm_runtime functions and IS_ERR_VALUE (was Re: [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks)   Nishanth Menon
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Nishanth Menon
• [PATCH v2] phy: Add MOXA MDIO driver   David Miller
• [PATCH] MAINTAINERS: mv643xx_eth: take over maintainership from Lennart   David Miller
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   David Miller
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   David Miller
• [PATCH RFC v1 0/7] net: phy: Ethernet PHY powerdown optimization   David Miller
• [PATCH v2 1/6] net: MOXA ART: clear TX descriptor length bits between sends   David Miller
• Delivery Status Notification (Failure)   Matthew Minter
• [PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs   Michał Mirosław
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Michał Mirosław
• [PATCH] ARM: dts: AM437x GP EVM support   Afzal Mohammed
• [PATCH] ARM: dts: AM437x GP EVM support   Afzal Mohammed
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Radha Mohan
• [RFC PATCH 1/2] arm64: Add 48-bit PA support for 4KB page size   Radha Mohan
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Radha Mohan
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Jean-Francois Moine
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Jean-Francois Moine
• [PATCH RESEND] ASoC: clk: probe defer when clock not yet ready   Jean-Francois Moine
• [PATCH RESEND v2] clk: probe defer when clock not yet ready   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: Fix erroneous double output while playing   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: Fix invalid SPDIF format   Jean-Francois Moine
• KNOT / CONTINUOUS (was: [PATCH] ASoC: kirkwood: Fix invalid SPDIF format)   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: Fix the CPU DAI rates   Jean-Francois Moine
• [PATCH 2/3] virtio: mmio: fix signature checking for BE guests   Pawel Moll
• [patch] clk: vexpress: NULL dereference on error path   Pawel Moll
• [patch] clk: vexpress: NULL dereference on error path   Pawel Moll
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Pawel Moll
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Pawel Moll
• [PATCH] use -fstack-protector-strong   Ingo Molnar
• [PATCH v2] use -fstack-protector-strong   Ingo Molnar
• [PATCH v2] use -fstack-protector-strong   Ingo Molnar
• [libseccomp-discuss] [PATCH v2] seccomp: not compatible with ARM OABI   Paul Moore
• [libseccomp-discuss] [PATCH v2] seccomp: not compatible with ARM OABI   Paul Moore
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7790: Correct typo in clocks   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Kuninori Morimoto
• [PATCH] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Kuninori Morimoto
• [PATCH 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Kuninori Morimoto
• [RFC 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Kuninori Morimoto
• [RFC 16/17] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB   Kuninori Morimoto
• [PATCH] rtc: rtc-at91rm9200: Corrected alarm over day/month wrap:   Andrew Morton
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Andrew Morton
• ARM: nommu: Unable to allocate RAM for process text/data, errno 12   Andrew Morton
• [3.8.y.z extended stable] Patch "scripts/kallsyms: filter symbols not in kernel address space" has been added to staging queue   Kamal Mostafa
• [PATCH 3.8 91/91] scripts/kallsyms: filter symbols not in kernel address space   Kamal Mostafa
• [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx   Dan Murphy
• [RFC PATCH] arm: SIGBUS on unsupported ARMv6 unaligned accesses   Robin Murphy
• [PATCH RFC v1 7/7] net: cpsw: resume/suspend PHY on port start/stop   Mugunthan V N
• [GIT PULL] Fix vmalloc allocations for KVM/ARM   Gleb Natapov
• [PATCH v7 0/5] clk: clock deregistration support   Sylwester Nawrocki
• [PATCH v7] clk: add MOXA ART SoCs clock driver   Sylwester Nawrocki
• [[PATCH v3]] videobuf2: Add missing lock held on vb2_fop_relase   Sylwester Nawrocki
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Sylwester Nawrocki
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Sylwester Nawrocki
• [patch] [media] exynos4-is: cleanup a define   Sylwester Nawrocki
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Rajendra Nayak
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Eric Nelson
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Eric Nelson
• [PATCH v2 04/13] uprobes: allow arch-specific initialization   Oleg Nesterov
• [PATCH v2 05/13] uprobes: add arch write opcode hook   Oleg Nesterov
• [PATCH] uprobes: introduce arch_uprobe->ixol   Oleg Nesterov
• [PATCH v2 01/13] uprobes: move function declarations out of arch   Oleg Nesterov
• [PATCH] uprobes: introduce arch_uprobe->ixol   Oleg Nesterov
• [PATCH v2 01/13] uprobes: move function declarations out of arch   Oleg Nesterov
• [PATCH] uprobes: Export write_opcode() as uprobe_write_opcode()   Oleg Nesterov
• [PATCH v3 01/15] uprobes: allow ignoring of probe hits   Oleg Nesterov
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Dinh Nguyen
• [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree   Dinh Nguyen
• [PATCHv2] arm: socfpga: Enable ARM_TWD for socfpga   Dinh Nguyen
• [GIT PULL] clk: socfpga: Clock fix for 3.13   Dinh Nguyen
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Dinh Nguyen
• [PATCH V2 4/4] arm: socfgpa: make use of common scu_a9_get_base() interface   Dinh Nguyen
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Dinh Nguyen
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Dinh Nguyen
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Dinh Nguyen
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Dinh Nguyen
• [GIT PULL]clocksource: dw_apb_timer_of: Fix read_sched_clock   Dinh Nguyen
• [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators   Markus Niebel
• [PATCH] ARM: DT: imx6qdl: fix can clocks   Markus Niebel
• [PATCH] ARM: DT: imx6qdl: fix can clocks   Markus Niebel
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Jarkko Nikula
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Jarkko Nikula
• [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id   Jarkko Nikula
• [RFC 4/4] ASoC: RX-51: Add DT support to sound driver   Jarkko Nikula
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Sekhar Nori
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Sekhar Nori
• [PATCH 1/2] gpio: davinci: Fix a check for unbanked gpio   Sekhar Nori
• [PATCH 0/2] DaVinci: GPIO: fixes   Sekhar Nori
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Sekhar Nori
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Sekhar Nori
• [PATCH 1/2] gpio: davinci: Fix a check for unbanked gpio   Sekhar Nori
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Sekhar Nori
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Sekhar Nori
• [PATCH v6 1/6] gpio: davinci: use readl/writel instead of __raw_*   Sekhar Nori
• [PATCH v6 4/6] gpio: davinci: add OF support   Sekhar Nori
• [PATCH 1/6] watchdog: davinci: change driver to use WDT core   Sekhar Nori
• [PATCH v2 0/6] Update Davinci watchdog driver   Sekhar Nori
• [PATCH 06/12] mtd: nand: davinci: adjust DT properties to MTD generic   Sekhar Nori
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Sekhar Nori
• [PATCH v6 4/6] gpio: davinci: add OF support   Sekhar Nori
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Sekhar Nori
• [PATCH v6 4/6] gpio: davinci: add OF support   Sekhar Nori
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Sekhar Nori
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Sekhar Nori
• [PATCH] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH] ARM: davinci: clock: return 0 upon error from clk_round_rate()   Sekhar Nori
• [PATCH] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Sekhar Nori
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Sekhar Nori
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Sekhar Nori
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Sekhar Nori
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Sekhar Nori
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH v6 4/6] gpio: davinci: add OF support   Sekhar Nori
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Sekhar Nori
• [PATCH] ARM: davinci: Fix McASP mem resource names   Sekhar Nori
• [PATCH v3 13/28] mtd: nand: pxa3xx: Add bad block handling   Brian Norris
• [PATCH v3 14/28] mtd: nand: pxa3xx: Add driver-specific ECC BCH support   Brian Norris
• [PATCH v3 18/28] mtd: nand: pxa3xx: Split prepare_command_pool() in two stages   Brian Norris
• [PATCH v2 12/27] mtd: nand: pxa3xx: Use a completion to signal device ready   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v3 12/28] mtd: nand: pxa3xx: Use a completion to signal device ready   Brian Norris
• [PATCH v3 13/28] mtd: nand: pxa3xx: Add bad block handling   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Brian Norris
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Brian Norris
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Brian Norris
• [PATCH bugfix] mtd: gpmi: serialize all the dma operations   Brian Norris
• [PATCH v4 26/31] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v2 10/19] mtd: sh_flctl: Enable the driver on all ARM platforms   Brian Norris
• [PATCH v2 10/19] mtd: sh_flctl: Enable the driver on all ARM platforms   Brian Norris
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Brian Norris
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Brian Norris
• [PATCH v4 15/31] mtd: nand: pxa3xx: Use a completion to signal device ready   Brian Norris
• [PATCH v4 06/31] mtd: nand: pxa3xx: Add documentation about the controller   Brian Norris
• [PATCH v5 03/14] mtd: nand: pxa3xx: Add bad block handling   Brian Norris
• [PATCH v5 05/14] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start   Brian Norris
• [PATCH v5 09/14] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()   Brian Norris
• [PATCH v5 12/14] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v5 12/14] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Brian Norris
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   Brian Norris
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [RFC/PATCH] NAND bus-width detection extreme makeover   Brian Norris
• [PATCH] ARM: S3C24XX: remove unused Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: imx: removed unused MACH_MXLADS Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: iop3xx: remove unused MACH_EP80219 Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: imx: removed unused MACH_MXLADS Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: iop3xx: remove unused MACH_EP80219 Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: S3C24XX: remove unused Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: remove unused XSCALE_PMU Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameter   Michael Opdenacker
• [PATCH] ARM: at91: remove redundant dependency   Michael Opdenacker
• [PATCHv9][ 1/6] video: imxfb: Introduce regulator support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM/serial: at91: specify RTS in DT using gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM/serial: at91: switch atmel serial to use gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm mach-at91: add support for Cosino board series by HCE Engineering   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] ARM/serial: at91: switch atmel serial to use gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6 1/2] PWM: atmel-pwm: add PWM controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6 1/2] PWM: atmel-pwm: add PWM controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91/dt: binding: add precision to AIC documentation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v7 2/2] PWM: atmel-pwm: add device tree binding document   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v7 1/2] PWM: atmel-pwm: add PWM controller driver   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11] ARM: at91: DT: switch C board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] ARM: at91: dt: at91rm9200ek: add emac and nor flash support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] ARM: at91: switch 1arm to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] ARM: at91: switch carmeva to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] ARM: at91: switch kafa board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] ARM: at91: switch flexibity to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] ARM: at91: switch RSI EWS board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] ARM: at91: switch Picotux 200 board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] ARM: at91: switch ecbat91 board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] ARM: at91: switch kb9202 board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] ARM: at91: switch csb637 board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] ARM: at91: switch Calao QIL-A9260 board to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] ARM: at91: switch 1arm to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] ARM: at91: switch 1arm to DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] ARM: at91/dt: add rm9200 spi0 chip select pins definitions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] ARM: at91/dt: add usb1 vbus and pullup pins   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] ARM: at91/dt: add spi0 support to at91rm9200ek board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] ARM: at91/dt: add i2c devices connected to at91rm9200ek board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v2] ARM: at91: add support for Cosino board series by HCE Engineering   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv9][ 1/3] Input: tsc2007: Add device tree support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv9][ 3/3] ARM: dts: cpuimx35 Add touchscreen support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv9][ 2/3] ARM: dts: cpuimx51 Add touchscreen support.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: sama5d3: reduce TWI internal clock frequency   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: at91: at91sam9g45: set default mmc pinctrl-names   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] serial: mxs-auart: flush_buffer hook and interrupt processing   Hector Palacios
• [PATCH 1/3] serial: mxs-auart: implement flush_buffer hook   Hector Palacios
• [PATCH 2/3] serial: mxs-auart: check BUSY flag on tx_empty hook   Hector Palacios
• [PATCH 3/3] serial: mxs-auart: move irq handling to a tasklet   Hector Palacios
• [PATCH 0/3] serial: mxs-auart: flush_buffer hook and interrupt processing   Hector Palacios
• [PATCH 1/3] serial: mxs-auart: implement flush_buffer hook   Hector Palacios
• [PATCH 3/3] serial: mxs-auart: move irq handling to a tasklet   Hector Palacios
• [PATCHv9][ 4/6] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Markus Pargmann
• [PATCH v3 0/0] usb: musb bugfixes   Markus Pargmann
• [PATCHv11][ 4/7] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Markus Pargmann
• [PATCH v6 0/8] ARM: imx27 pinctrl   Markus Pargmann
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Markus Pargmann
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Markus Pargmann
• [PATCH v6 4/8] ARM: dts: imx27 pinctrl   Markus Pargmann
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Markus Pargmann
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Markus Pargmann
• [PATCH] pinctrl: imx1-core populate subdevices   Markus Pargmann
• [PATCH v7 0/7] pinctrl: imx27: imx27 pincontrol driver   Markus Pargmann
• [PATCH v7 1/7] ARM: dts: imx27 pin functions   Markus Pargmann
• [PATCH v7 2/7] ARM: dts: imx27 pingroups   Markus Pargmann
• [PATCH v7 3/7] ARM: dts: imx27 pinctrl   Markus Pargmann
• [PATCH v7 4/7] ARM: dts: imx27 phyCARD-S pinctrl   Markus Pargmann
• [PATCH v7 5/7] ARM: dts: imx27 phycore move uart1 to rdk   Markus Pargmann
• [PATCH v7 6/7] ARM: dts: imx27 phycore pinctrl   Markus Pargmann
• [PATCH v7 7/7] ARM: imx27: enable pinctrl   Markus Pargmann
• [RFC] ASoC: fsl-ssi: Missing DMA-Request workaround   Markus Pargmann
• [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Markus Pargmann
• [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Markus Pargmann
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Markus Pargmann
• [PATCH] ASoC: fsl-ssi: Fix interrupt enable/disable   Markus Pargmann
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Markus Pargmann
• [PATCH] ASoC: fsl-ssi: Fix interrupt enable/disable   Markus Pargmann
• [PATCH v7 3/7] ARM: dts: imx27 pinctrl   Markus Pargmann
• [RFC 0/9] ASoC: fsl-ssi: offline/online configuration and cleanups   Markus Pargmann
• [RFC 9/9] ARM: DTS: imx5* imx6*, use imx50-ssi   Markus Pargmann
• [RESEND PATCH v3 0/4] usb: musb bugfixes   Markus Pargmann
• [RESEND PATCH v3 1/4] usb: musb: gadget, stay IDLE without gadget driver   Markus Pargmann
• [RESEND PATCH v3 2/4] usb: musb: Bugfix of_node assignment   Markus Pargmann
• [RESEND PATCH v3 3/4] usb: musb: dsps, debugfs files   Markus Pargmann
• [RESEND PATCH v3 4/4] usb: musb: dsps, use devm_kzalloc   Markus Pargmann
• [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver   Markus Pargmann
• [PATCH v8 1/4] ARM: dts: imx27 iomux device node   Markus Pargmann
• [PATCH v8 2/4] ARM: dts: imx27 phyCARD-S pinctrl   Markus Pargmann
• [PATCH v8 3/4] ARM: dts: imx27 phycore move uart1 to rdk   Markus Pargmann
• [PATCH v8 4/4] ARM: dts: imx27 phycore pinctrl   Markus Pargmann
• [PATCH 0/8] ASoC: fsl-ssi: offline/online configuration and cleanups   Markus Pargmann
• [PATCH 1/8] ASoC: fsl-ssi: Move ac97 specific setup to seperate function   Markus Pargmann
• [PATCH 2/8] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH 3/8] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Markus Pargmann
• [PATCH 4/8] ASoC: fsl-ssi: Add offline_config flag   Markus Pargmann
• [PATCH 5/8] ASoC: fsl-ssi: Add configuration helper functions   Markus Pargmann
• [PATCH 6/8] ASoC: fsl-ssi: Move RX/TX configuration to seperate functions   Markus Pargmann
• [PATCH 7/8] ASoC: fsl-ssi: Drop ac97 specific trigger function   Markus Pargmann
• [PATCH 8/8] ARM: DTS: imx5* imx6*, use imx50-ssi   Markus Pargmann
• [PATCH 3/8] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Markus Pargmann
• [PATCH 2/8] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH 2/8] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH v2 0/9] ASoC: fsl-ssi: offline/online configuration and cleanups   Markus Pargmann
• [PATCH v2 1/9] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH v2 2/9] ASoC: fsl-ssi: Fix interrupt mapping and release   Markus Pargmann
• [PATCH v2 3/9] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Markus Pargmann
• [PATCH v2 4/9] ASoC: fsl-ssi: Add offline_config flag   Markus Pargmann
• [PATCH v2 5/9] ASoC: fsl-ssi: Add configuration helper functions   Markus Pargmann
• [PATCH v2 6/9] ASoC: fsl-ssi: Move RX/TX configuration to seperate functions   Markus Pargmann
• [PATCH v2 7/9] ASoC: fsl-ssi: Drop ac97 specific trigger function   Markus Pargmann
• [PATCH v2 8/9] ARM: DTS: imx5* imx6*, use imx50-ssi   Markus Pargmann
• [PATCH v2 9/9] ASoC: fsl-ssi: Drop AC97 debug register usage   Markus Pargmann
• [RESEND PATCH v3 3/4] usb: musb: dsps, debugfs files   Markus Pargmann
• [RESEND PATCH v3 4/4] usb: musb: dsps, use devm_kzalloc   Markus Pargmann
• [RESEND PATCH v3 2/4] usb: musb: Bugfix of_node assignment   Markus Pargmann
• [PATCH v2 3/9] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching   Markus Pargmann
• [PATCH] pinctrl: imx1-core populate subdevices   Markus Pargmann
• [libseccomp-discuss] ARM audit, seccomp, etc are broken wrt OABI syscalls   Eric Paris
• [PATCH v2] seccomp: not compatible with ARM OABI   Eric Paris
• [PATCH 3/4] mfd: sec-core: Add cells for S5M8767-clocks   Kyungmin Park
• [PATCH 3/4] mfd: sec-core: Add cells for S5M8767-clocks   Kyungmin Park
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Kyungmin Park
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Kyungmin Park
• [PATCH V4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Anup Patel
• [PATCH V4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Anup Patel
• [PATCH V4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Anup Patel
• [PATCH RESEND v4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Anup Patel
• [PATCH 2/2] arm: Support for platforms with split GIC cpu interface registers.   Anup Patel
• [PATCH 2/2] arm: Support for platforms with split GIC cpu interface registers.   Anup Patel
• [PATCH 2/2] arm: Support for platforms with split GIC cpu interface registers.   Anup Patel
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Anup Patel
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Anup Patel
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Anup Patel
• [PATCH 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Anup Patel
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Anup Patel
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Anup Patel
• [PATCH 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Anup Patel
• [PATCHv5] dmaengine: Add support for BCM2835   Joe Perches
• [PATCHv5] dmaengine: Add support for BCM2835   Joe Perches
• [PATCHv7] dmaengine: Add support for BCM2835   Joe Perches
• [PATCH] mmp_pdma: Style neatening   Joe Perches
• [PATCHv7] dmaengine: Add support for BCM2835   Joe Perches
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Joe Perches
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Joe Perches
• отделается от ужаснейшего зрения конкретно   Perepelkina-a
• [BUG?] ARM: mvebu: is second PCIe unit of Armada XP mv78230 x1 or x4?   Thomas Petazzoni
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Thomas Petazzoni
• [PATCH v3 25/28] ARM: mvebu: Add support for NAND controller in Armada 370/XP   Thomas Petazzoni
• Armada XP Internal registers   Thomas Petazzoni
• Armada XP Internal registers   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260   Thomas Petazzoni
• [BUG?] ARM: mvebu: is second PCIe unit of Armada XP mv78230 x1 or x4?   Thomas Petazzoni
• address translation for PCIe-to-localbus bridge   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Thomas Petazzoni
• [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260   Thomas Petazzoni
• address translation for PCIe-to-localbus bridge   Thomas Petazzoni
• [PATCH] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Thomas Petazzoni
• SPARSE_IRQ on Kirkwood   Thomas Petazzoni
• address translation for PCIe-to-localbus bridge   Thomas Petazzoni
• address translation for PCIe-to-localbus bridge   Thomas Petazzoni
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Thomas Petazzoni
• [PATCH RFC 3/9] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus   Thomas Petazzoni
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Thomas Petazzoni
• ARM network performance and dma_mask (was: [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s)   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable   Thomas Petazzoni
• [PATCH v5 00/14] Armada 370/XP NAND support   Thomas Petazzoni
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Thomas Petazzoni
• [PATCH 0/4] ARM: mvebu: misc important fixes   Thomas Petazzoni
• [PATCH 1/4] irqchip: armada-370-xp: fix IPI race condition   Thomas Petazzoni
• [PATCH 2/4] irqchip: armada-370-xp: fix MSI race condition   Thomas Petazzoni
• [PATCH 3/4] ARM: mvebu: use the virtual CPU registers to access coherency registers   Thomas Petazzoni
• [PATCH 4/4] ARM: mvebu: re-enable PCIe on Armada 370 DB   Thomas Petazzoni
• [PATCH 1/2] PCI: mvebu - The bridge should obey the MEM and IO command bits   Thomas Petazzoni
• [PATCH v3 2/2] PCI: mvebu - Support a bridge with no IO port window   Thomas Petazzoni
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Thomas Petazzoni
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Mikael Pettersson
• [PATCH v7] arm: use built-in byte swap function   Kim Phillips
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Lorenzo Pieralisi
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Lorenzo Pieralisi
• [PATCH v2] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Lorenzo Pieralisi
• [PATCH RFC v3 00/12] arm64: suspend/resume implementation   Lorenzo Pieralisi
• [PATCH RFC v3 01/12] arm64: kernel: add MPIDR_EL1 accessors macros   Lorenzo Pieralisi
• [PATCH RFC v3 02/12] arm64: kernel: build MPIDR_EL1 hash function data structure   Lorenzo Pieralisi
• [PATCH RFC v3 03/12] arm64: kernel: suspend/resume registers save/restore   Lorenzo Pieralisi
• [PATCH RFC v3 04/12] arm64: kernel: cpu_{suspend/resume} implementation   Lorenzo Pieralisi
• [PATCH RFC v3 05/12] arm64: kernel: implement fpsimd CPU PM notifier   Lorenzo Pieralisi
• [PATCH RFC v3 06/12] arm: kvm: implement CPU PM notifier   Lorenzo Pieralisi
• [PATCH RFC v3 07/12] arm64: kernel: refactor code to install/uninstall breakpoints   Lorenzo Pieralisi
• [PATCH RFC v3 08/12] arm64: kernel: implement HW breakpoints CPU PM notifier   Lorenzo Pieralisi
• [PATCH RFC v3 09/12] arm64: enable generic clockevent broadcast   Lorenzo Pieralisi
• [PATCH RFC v3 10/12] arm64: kernel: add CPU idle call   Lorenzo Pieralisi
• [PATCH RFC v3 11/12] arm64: kernel: add PM build infrastructure   Lorenzo Pieralisi
• [PATCH RFC v3 12/12] arm64: add CPU power management menu/entries   Lorenzo Pieralisi
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Lorenzo Pieralisi
• Request inclusion of ARM v7 cache optimization patch into linux-next   Lorenzo Pieralisi
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Lorenzo Pieralisi
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Lorenzo Pieralisi
• HYP Kernel boot requirements   Lorenzo Pieralisi
• [PATCH 0/2] ARM64: perf: add support for the perf registers and dwarf unwinding   Jean Pihet
• [PATCH v3] iommu: shmobile: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCHv4] video: backlight: gpio-backlight: Add DT support.   Laurent Pinchart
• [PATCH v2 19/19] fbdev: sh-mobile-lcdcfb: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH 07/19] v4l: sh_vou: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH -v2] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings   Laurent Pinchart
• [PATCH 2/3] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH 2/3] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH] ARM: shmobile: r8a7779: Remove unused clock constants   Laurent Pinchart
• [PATCH] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Laurent Pinchart
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH/RFC] clk: shmobile: DT property SoC <-> CCF interface prototype   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH 3/3] clk: shmobile: Add R8A7790 clocks support   Laurent Pinchart
• [PATCH 0/7] ARM: shmobile: Use interrupt macros in DT files   Laurent Pinchart
• [PATCH 1/7] ARM: shmobile: Use #include in device tree sources   Laurent Pinchart
• [PATCH 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Laurent Pinchart
• [PATCH 3/7] ARM: shmobile: Use interrupt macros in board DT files   Laurent Pinchart
• [PATCH 4/7] ARM: shmobile: marzen-reference: Use falling edge IRQ for LAN9221   Laurent Pinchart
• [PATCH 5/7] ARM: shmobile: bockw-reference: Use falling edge IRQ for LAN9221   Laurent Pinchart
• [PATCH 6/7] ARM: shmobile: kzm9g-reference: Use falling edge IRQ for LAN9221   Laurent Pinchart
• [PATCH 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Laurent Pinchart
• [PATCH 0/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH 2/2] ASoC: sh: rcar: Depend on ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH/RFC] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH v2 0/7] Renesas R8A7790 Common Clock Framework support   Laurent Pinchart
• [PATCH v2 1/7] clk: shmobile: Add R-Car Gen2 clocks support   Laurent Pinchart
• [PATCH v2 2/7] clk: shmobile: Add DIV6 clock support   Laurent Pinchart
• [PATCH v2 3/7] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH v2 4/7] ARM: shmobile: r8a7790: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v2 5/7] ARM: shmobile: r8a7791: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v2 6/7] ARM: shmobile: r8a7790: Add clocks   Laurent Pinchart
• [PATCH v2 7/7] ARM: shmobile: r8a7790: Reference clocks   Laurent Pinchart
• [PATCH v2 0/2] ARM: shmobile: Lager reference serial port support   Laurent Pinchart
• [PATCH v2 1/2] ARM: shmobile: r8a7790: Add serial ports to the device tree   Laurent Pinchart
• [PATCH v2 2/2] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT   Laurent Pinchart
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH 3/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY in defconfig   Laurent Pinchart
• [PATCH v2 10/19] mtd: sh_flctl: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH v2 10/19] mtd: sh_flctl: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCHv3 2/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Laurent Pinchart
• [PATCH] ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile   Laurent Pinchart
• [PATCHv4][ 3/7] staging: imx-drm: Add RGB666 support for parallel display.   Laurent Pinchart
• [PATCH] ARM: shmobile: r7s72100 GPIO DT nodes for GPIO RZ   Laurent Pinchart
• [PATCH] ARM: shmobile: r7s72100 GPIO DT nodes for GPIO RZ   Laurent Pinchart
• [PATCH] ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile   Laurent Pinchart
• [PATCH v2 0/7] Renesas R8A7790 Common Clock Framework support   Laurent Pinchart
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Laurent Pinchart
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Laurent Pinchart
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Laurent Pinchart
• [PATCH 0/7] ARM: shmobile: Use interrupt macros in DT files   Laurent Pinchart
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Laurent Pinchart
• [PATCH 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Laurent Pinchart
• [PATCH 1/2] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH v2 2/7] ARM: shmobile: Use interrupt macros in SoC DT files   Laurent Pinchart
• [PATCH 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Laurent Pinchart
• [PATCH v2 7/7] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Laurent Pinchart
• [PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support   Laurent Pinchart
• [PATCH v3 1/8] clk: shmobile: Add R-Car Gen2 clocks support   Laurent Pinchart
• [PATCH v3 2/8] clk: shmobile: Add DIV6 clock support   Laurent Pinchart
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH v3 4/8] ARM: shmobile: r8a7790: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v3 5/8] ARM: shmobile: r8a7791: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v3 6/8] ARM: shmobile: r8a7790: Add clocks   Laurent Pinchart
• [PATCH v3 7/8] ARM: shmobile: r8a7790: Reference clocks   Laurent Pinchart
• [PATCH v3 8/8] ARM: shmobile: r8a7791: Add clocks   Laurent Pinchart
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH v2] ARM: shmobile: Fix r8a7790 GPIO resources in DTS   Laurent Pinchart
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Laurent Pinchart
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 3/3] ARM: shmobile: marzen: enable HSPI0 in DTS   Laurent Pinchart
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH RFC v2 01/17] clk: shmobile: r8a7779: Add clocks support   Laurent Pinchart
• [PATCH RFC v2 02/17] clk: shmobile: r8a7779: Add MSTP clock support   Laurent Pinchart
• [PATCH RFC v2 03/17] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH RFC v2 04/17] ARM: shmobile: r8a7779: Add clocks   Laurent Pinchart
• [PATCH RFC v2 05/17] ARM: shmobile: r8a7779: Reference clocks   Laurent Pinchart
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Laurent Pinchart
• [PATCH -v2] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings   Laurent Pinchart
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Laurent Pinchart
• [PATCH 09/12] usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 00/15] Enable compilation of various Renesas drivers with COMPILE_TEST   Laurent Pinchart
• [PATCH 01/15] i2c: shmobile/rcar: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 02/15] input: sh_keysc: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 04/15] iommu: shmobile: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 05/15] DMA: shdma: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 06/15] v4l: sh_vou: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 08/15] mmc: sh_mmcif: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 09/15] mtd: sh_flctl: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 10/15] irda: sh_irda: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 11/15] pwm: pwm-renesas-tpu: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 12/15] thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 13/15] fbdev: sh-mobile-lcdcfb: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 14/15] spi: sh-msiof: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 15/15] sh: intc: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH] ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error   Laurent Pinchart
• [PATCH] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Laurent Pinchart
• [PATCH RFC v2 07/17] ARM: shmobile: r8a7779: Sort headers alphabetically   Laurent Pinchart
• [PATCH 00/04] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support   Laurent Pinchart
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Laurent Pinchart
• [PATCH 04/04] ARM: shmobile: Genmai SCIF2 PINCTRL configuration   Laurent Pinchart
• [PATCH 02/04] ARM: shmobile: Genmai LED1 and LED2 support   Laurent Pinchart
• [PATCH RFC v2 15/17] ARM: shmobile: Remove non-multiplatform Marzen reference support   Laurent Pinchart
• [PATCH V2] media: i2c: Add ADV761X support   Laurent Pinchart
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Laurent Pinchart
• [PATCH 0/2] Document GPIO regulator regulator-type property and use it   Laurent Pinchart
• [PATCH 1/2] regulator: gpio-regulator: Add required regulator-type property   Laurent Pinchart
• [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT   Laurent Pinchart
• [PATCH v2] ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile   Laurent Pinchart
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Laurent Pinchart
• [PATCH 11/15] pwm: pwm-renesas-tpu: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH V2] media: i2c: Add ADV761X support   Laurent Pinchart
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH] ARM: make OABI default to off   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v4] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Nicolas Pitre
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Nicolas Pitre
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Nicolas Pitre
• [PATCH] ARM: pxa: Move iotable mapping inside vmalloc region   Nicolas Pitre
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Nicolas Pitre
• [PATCH v4 REPOST] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Nicolas Pitre
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Nicolas Pitre
• [PATCH] use -fstack-protector-strong   Nicolas Pitre
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Nicolas Pitre
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Nicolas Pitre
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Nicolas Pitre
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Nicolas Pitre
• [PATCH v4 4/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• [PATCH v4 4/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Nicolas Pitre
• ACPI   Nicolas Pitre
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Sourav Poddar
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)   Sourav Poddar
• [PATCH 0/3] regulator: tps6586x: add version detection and voltage tables   Kai Poggensee
• [PATCH v2 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v2 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v2 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v2 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v2 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Matt Porter
• [PATCH v2 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v2 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v2 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v2 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v2 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v2 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Matt Porter
• [PATCHv4] dmaengine: Add support for BCM2835   Matt Porter
• [PATCH v2 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v3 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v3 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v3 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v3 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v3 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v3 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v3 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v3 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v3 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v3 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH RFC 6/6] kprobes: Add cases for arm and arm64 in sample module   Sandeepa Prabhu
• [PATCH RFC 4/6] arm64: Add kernel return probes support(kretprobes)   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 3/6] arm64: Kprobes instruction simulation support   Sandeepa Prabhu
• [PATCH RFC 4/6] arm64: Add kernel return probes support(kretprobes)   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH 0/2] ARM64: perf: add support for the perf registers and dwarf unwinding   Sandeepa Prabhu
• [PATCH 0/2] ARM64: perf: add support for the perf registers and dwarf unwinding   Sandeepa Prabhu
• [PATCH 0/2] ARM64: perf: add support for the perf registers and dwarf unwinding   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Sandeepa Prabhu
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Bill Pringlemeir
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Bill Pringlemeir
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Bill Pringlemeir
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Bill Pringlemeir
• [PATCH] ARM: vt8500: add defconfig   Tony Prisk
• [PATCH] ARM: vt8500: add defconfig   Tony Prisk
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support   Roger Quadros
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Roger Quadros
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Roger Quadros
• [PATCH 3/3] ARM: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE   Sricharan R
• [PATCH V3 0/7] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V3 2/7] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V3 3/7] ARM: DTS: DRA: Add crossbar device binding   Sricharan R
• [PATCH V3 4/7] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs   Sricharan R
• [PATCH V3 5/7] ARM: DTS: DRA7: Add routable-irqs property for gic node   Sricharan R
• [PATCH V3 6/7] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number   Sricharan R
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [PATCH 1/2] ARM: dts: doc: Document missing binding for omap5-mpu   Sricharan R
• [PATCH 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Sricharan R
• [PATCH 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Sricharan R
• [PATCH 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Sricharan R
• [PATCH V2 1/2] ARM: dts: doc: Document missing binding for omap5-mpu   Sricharan R
• [PATCH V2 2/2] ARM: dts: doc: Document missing binding for ti-sdma controller   Sricharan R
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [PATCH V4 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V4 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V4 3/4] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number   Sricharan R
• [PATCH V4 4/4] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [PATCH V4 0/3] ARM: DTS: DRA7: Updates for adding crossbar device   Sricharan R
• [PATCH V4 1/3] ARM: DTS: DRA7: Add crossbar device binding   Sricharan R
• [PATCH V4 2/3] ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs   Sricharan R
• [PATCH V4 3/3] ARM: DTS: DRA7: Add routable-irqs property for gic node   Sricharan R
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V4 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH] clk: Do not dereference potential NULL pointer   Thierry Reding
• [PATCH] clk: Properly initialize reference count   Thierry Reding
• [PATCHv4] video: backlight: gpio-backlight: Add DT support.   Thierry Reding
• [PATCHv4] video: backlight: gpio-backlight: Add DT support.   Thierry Reding
• [Ksummit-2013-discuss] ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• pci-mvebu driver on km_kirkwood   Thierry Reding
• [PATCH] ARM: nommu: Implement dummy early_paging_init()   Thierry Reding
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Thierry Reding
• address translation for PCIe-to-localbus bridge   Thierry Reding
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Thierry Reding
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Thierry Reding
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Thierry Reding
• [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.   Thierry Reding
• [PATCH] ARM: nommu: Include asm/procinfo.h to fix build warning   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Thierry Reding
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Thierry Reding
• ARM topic: Is DT on ARM the solution, or is there something better?   Thierry Reding
• Report from 2013 ARM kernel summit   Thierry Reding
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Thierry Reding
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Thierry Reding
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Thierry Reding
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Thierry Reding
• [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support   Thierry Reding
• [PATCH 1/5] Documentation: dt: Add kona-pwm binding   Thierry Reding
• [PATCH 2/5] pwm: kona: Introduce Kona PWM controller support   Thierry Reding
• [PATCH 1/3] ARM: tegra: fix DEBUG_LL combined with LPAE   Thierry Reding
• [PATCH 2/3] ARM: tegra: don't hard-code DEBUG_LL baud rate   Thierry Reding
• [PATCH 3/3] ARM: tegra: use section-sized static mappings for LPAE too   Thierry Reding
• [PATCH 0/3] regulator: tps6586x: add version detection and voltage tables   Thierry Reding
• [PATCH 2/3] regulator: tps6586x: add voltage table for tps658643   Thierry Reding
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Thierry Reding
• [PATCH 1/3] pwm: Add mc13xxx pwm driver.   Thierry Reding
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Enable mc13xxx-pwm support.   Thierry Reding
• [PATCH 2/3] ARM: dts: mbimxsd53 Add backlight and LCD regulator.   Thierry Reding
• [PATCH 1/3] pwm: Add mc13xxx pwm driver.   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv6 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Thierry Reding
• [PATCHv6 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [PATCH 11/15] pwm: pwm-renesas-tpu: Enable driver compilation with COMPILE_TEST   Thierry Reding
• [PATCH V2] ASoC: tegra: use reset framework   Thierry Reding
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Thierry Reding
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Thierry Reding
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Thierry Reding
• [PATCH 04/31] ARM: tegra: update DT files to add reset properties   Thierry Reding
• [PATCH 05/31] ARM: tegra: update DT files to add DMA properties   Thierry Reding
• [PATCH 06/31] ARM: tegra: select the reset framework   Thierry Reding
• [PATCH 07/31] clk: tegra: implement a reset driver   Thierry Reding
• [PATCH 08/31] pci: tegra: use reset framework   Thierry Reding
• [PATCH 08/31] pci: tegra: use reset framework   Thierry Reding
• [PATCH 09/31] drm/tegra: use reset framework   Thierry Reding
• [PATCH 10/31] ARM: tegra: pass reset to tegra_powergate_sequence_power_up()   Thierry Reding
• [PATCH 10/31] ARM: tegra: pass reset to tegra_powergate_sequence_power_up()   Thierry Reding
• [PATCH 12/31] dma: tegra: use reset framework   Thierry Reding
• [PATCH V2] dma: tegra: register as an OF DMA controller   Thierry Reding
• [PATCH V2] serial: tegra: convert to standard DMA DT bindings   Thierry Reding
• [PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()   Thierry Reding
• [PATCH 20/31] i2c: tegra: use reset framework   Thierry Reding
• [PATCH 21/31] staging: nvec: use reset framework   Thierry Reding
• [PATCH 22/31] spi: tegra: use reset framework   Thierry Reding
• [PATCH 24/31] serial: tegra: use reset framework   Thierry Reding
• [PATCH 26/31] Input: tegra-kbc - use reset framework   Thierry Reding
• [PATCH 27/31] USB: EHCI: tegra: use reset framework   Thierry Reding
• [PATCH 28/31] ARM: tegra: remove legacy clock entries from DT   Thierry Reding
• [PATCH 29/31] ARM: tegra: remove legacy DMA entries from DT   Thierry Reding
• [PATCH 30/31] clk: tegra: remove legacy reset APIs   Thierry Reding
• [PATCH 31/31] clk: tegra: remove bogus PCIE_XCLK   Thierry Reding
• [PATCH 1/5] clk: tegra: fix blink clock rate   Thierry Reding
• [PATCH 1/5] clk: tegra: fix blink clock rate   Thierry Reding
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Thierry Reding
• [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3   Sebastian Reichel
• [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3   Sebastian Reichel
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Sebastian Reichel
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Sebastian Reichel
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Sebastian Reichel
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Sebastian Reichel
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Sebastian Reichel
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Sebastian Reichel
• [PATCH 4/5] ARM: dts: Add basic support for omap3 LDP zoom1 labrador   Sebastian Reichel
• N900 board code in 3.14   Sebastian Reichel
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Sebastian Reichel
• [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found   Sebastian Reichel
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Sebastian Reichel
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Sebastian Reichel
• [PATCH 3/3] ARM: OMAP2+: Fix eMMC on n900 with device tree   Sebastian Reichel
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Sebastian Reichel
• N900 board code in 3.14   Sebastian Reichel
• [PATCH 3/3] ARM: OMAP2+: Fix eMMC on n900 with device tree   Sebastian Reichel
• N900 board code in 3.14   Sebastian Reichel
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Sebastian Reichel
• [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework   Mauro Ribeiro
• [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework   Mauro Ribeiro
• [PATCH v3 0/4] Exynos 5410 Dual cluster support   Mauro Ribeiro
• ACPI vs DT at runtime   Tom Rini
• Donation of Allwinner-based CubieTruck to anyone interested in developing & upstreaming   Maxime Ripard
• [PATCH 0/2] Add SMP support for the Allwinner A31 SoCs   Maxime Ripard
• [PATCH 1/2] ARM: sun6i: dt: Add IP needed to bring up the additional cores   Maxime Ripard
• [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Maxime Ripard
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Maxime Ripard
• [PATCH v3 2/2] ARM: sun4i/sun7i: DT documentation for RTC driver   Maxime Ripard
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Maxime Ripard
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Maxime Ripard
• [PATCH 2/2] clocksource: sun4i: change CPU mask to cpu_possible_mask   Maxime Ripard
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Maxime Ripard
• [GIT PULL] Allwinner sunXi clock patches for 3.13   Maxime Ripard
• [PATCH v3 0/4] Add support for the Allwinner A31 Reset Controllers   Maxime Ripard
• [PATCH] clk: add flags to distinguish xtal clocks   Maxime Ripard
• [PATCH v3 1/4] reset: Add Allwinner SoCs Reset Controller Driver   Maxime Ripard
• [PATCH] clk: add flags to distinguish xtal clocks   Maxime Ripard
• [PATCH] clk: add flags to distinguish xtal clocks   Maxime Ripard
• [PATCH] clk: add flags to distinguish xtal clocks   Maxime Ripard
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Maxime Ripard
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Maxime Ripard
• [PATCH v4 1/4] reset: Add Allwinner SoCs Reset Controller Driver   Maxime Ripard
• [PATCH v4 2/4] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER   Maxime Ripard
• [PATCH v4 3/4] ARM: sunxi: Register the A31 reset IP in init_time   Maxime Ripard
• [PATCH v4 4/4] ARM: sun6i: Add the reset controller to the DTSI   Maxime Ripard
• [PATCH] ARM: sunxi: dt: add EMAC aliases   Maxime Ripard
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Maxime Ripard
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Maxime Ripard
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Maxime Ripard
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Maxime Ripard
• [PATCH] ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree   Maxime Ripard
• [PATCH] ARM: cfa10036: Add dr_mode and phy_type properties to the DT   Maxime Ripard
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Maxime Ripard
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Maxime Ripard
• [PATCH v3 1/2] ARM: sun4i/sun7i: RTC driver   Maxime Ripard
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Maxime Ripard
• [RFC PATCH 1/3] iio: accel: Add device tree probing for STMicro accelerometers   Maxime Ripard
• [RFC PATCH 2/3] iio: accel: Add device tree probing for STMicro gyroscopes   Maxime Ripard
• [RFC PATCH 3/3] ARM: cfa10057: Add the accelerometer and gyroscope to the device tree   Maxime Ripard
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Maxime Ripard
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Maxime Ripard
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Maxime Ripard
• [PATCH RFC 08/10] net: stmmac:sti: Add STi SOC glue driver.   Maxime Ripard
• [PATCH] iio: mxs-lradc: compute temperature from channel 8 and 9   Maxime Ripard
• [RFC PATCH 1/3] iio: accel: Add device tree probing for STMicro accelerometers   Maxime Ripard
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Maxime Ripard
• [PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Maxime Ripard
• [Ksummit-2013-discuss] ARM topic: Is DT on ARM the solution, or is there something better?   Guenter Roeck
• [PATCH] watchdog: at91sam9_wdt: various fixes   Guenter Roeck
• [PATCH 1/3] watchdog: at91sam9_wdt: fix secs_to_ticks   Guenter Roeck
• [PATCH 2/3] watchdog: at91sam9_wdt: avoid spurious watchdog reset during init   Guenter Roeck
• [PATCH 3/3] watchdog: at91sam9_wdt: increase security margin on watchdog counter reset   Guenter Roeck
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• Fwd: [PATCH 2/8] watchdog: davinci: use davinci_wdt_device structure to hold device data   Guenter Roeck
• [PATCH 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• [PATCH v2 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• Fwd: [PATCH 2/8] watchdog: davinci: use davinci_wdt_device structure to hold device data   Guenter Roeck
• Fwd: [PATCH 3/8] watchdog: davinci: add GET_TIMELEFT option support   Guenter Roeck
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   Guenter Roeck
• Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property   Guenter Roeck
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   Guenter Roeck
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   Guenter Roeck
• Fwd: [PATCH 8/8] arm: dts: keystone: add watchdog entry   Guenter Roeck
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   Guenter Roeck
• [PATCH v3 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• [PATCH v3 2/2] ARM: bcm281xx: watchdog configuration   Guenter Roeck
• [PATCH 1/6] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH 3/6] watchdog: davinci: add GET_TIMELEFT option support   Guenter Roeck
• [PATCH 4/6] watchdog: davinci: add "timeout-sec" property   Guenter Roeck
• [PATCH 5/6] watchdog: davinci: reuse driver for keystone arch   Guenter Roeck
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• [PATCH v4 1/2] watchdog: bcm281xx: Watchdog Driver   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Only register for cpufreq on CPU_FREQ_S3C24XX   Guenter Roeck
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH v2] watchdog: s3c2410_wdt: Only register for cpufreq on ARM_S3C24XX_CPUFREQ   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Guenter Roeck
• [PATCH v2] watchdog: s3c2410_wdt: Handle rounding a little better for timeout   Guenter Roeck
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Guenter Roeck
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Guenter Roeck
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Guenter Roeck
• [PATCH v10 00/20] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Joerg Roedel
• [PATCH v10 00/20] iommu/exynos: Fixes and Enhancements of System MMU driver with DT   Joerg Roedel
• [PATCH v2 05/19] iommu: shmobile: Enable the driver on all ARM platforms   Joerg Roedel
• [PATCH v5 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Steven Rostedt
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Steven Rostedt
• [PATCH] scripts/kallsyms: filter symbols not in kernel address space   Stephen Rothwell
• linux-next: manual merge of the gpio tree with the arm-soc and cortex trees   Stephen Rothwell
• linux-next: manual merge of the gpio tree with the arm-soc and cortex trees   Stephen Rothwell
• Request inclusion of ARM v7 cache optimization patch into linux-next   Stephen Rothwell
• [Inquiry] How to boot using USB device and configure PCI using OMAP4460/4470?   Maggie Mae Roxas
• [Inquiry] How to boot using USB device and configure PCI using OMAP4460/4470?   Maggie Mae Roxas
• [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Chris Ruehl
• [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Chris Ruehl
• [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Chris Ruehl
• [PATCH] pinctrl: imx1-core populate subdevices   Chris Ruehl
• [PATCH] pinctrl: imx1-core populate subdevices   Chris Ruehl
• [PATCH] pinctrl: imx1-core populate subdevices   Chris Ruehl
• [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Chris Ruehl
• [PATCH] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Måns Rullgård
• ACPI   Måns Rullgård
• [PULL] symbol fix for ARM kallsyms   Rusty Russell
• [PATCH 2/3] virtio: mmio: fix signature checking for BE guests   Rusty Russell
• [PATCH 2/3] virtio: mmio: fix signature checking for BE guests   Rusty Russell
• kernel BUG at kernel/kallsyms.c:222!   Rusty Russell
• kernel BUG at kernel/kallsyms.c:222!   Rusty Russell
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Mark Rutland
• [PATCH v11 1/2] clk: hisilicon: add common clock support   Mark Rutland
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Mark Rutland
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Mark Rutland
• [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable   Mark Rutland
• [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree   Mark Rutland
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Mark Rutland
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Mark Rutland
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Mark Rutland
• [PATCH V4 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Mark Rutland
• ACPI vs DT at runtime   Mark Rutland
• [PATCH V4 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Mark Rutland
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Mark Rutland
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Mark Rutland
• [PATCHv3] ASoC: Add support for BCM2835   Mark Rutland
• [PATCHv7] dmaengine: Add support for BCM2835   Mark Rutland
• [PATCHv7] dmaengine: Add support for BCM2835   Mark Rutland
• [PATCHv3] ASoC: Add support for BCM2835   Mark Rutland
• ACPI vs DT at runtime   Mark Rutland
• ACPI vs DT at runtime   Mark Rutland
• [PATCH 1/5] Documentation: dt: Add kona-pwm binding   Mark Rutland
• ACPI vs DT at runtime   Mark Rutland
• ACPI vs DT at runtime   Mark Rutland
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Mark Rutland
• [PATCH v3 3/8] clk: shmobile: Add MSTP clock support   Mark Rutland
• [PATCH v2 2/4] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Mark Rutland
• [PATCH v2 3/4] ata: add APM X-Gene SoC 6.0Gbps SATA PHY driver   Mark Rutland
• [PATCH v2 4/4] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Mark Rutland
• [PATCH v2 2/4] Documentation: Add APM X-Gene SoC 6.0Gbps SATA PHY driver binding documentation   Mark Rutland
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   Mark Rutland
• [PATCH v5 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Mark Rutland
• [PATCH] Documentation: devicetree: arm: add lpae property to cpus/cpu bindings   Mark Rutland
• [RFC PATCH 1/2] arm64: Add 48-bit PA support for 4KB page size   Mark Rutland
• [RFC PATCH 2/2] arm64: Add 48-bit PA support for 64KB page size   Mark Rutland
• [PATCH] ARM: l2x0: add prefetch and power ctrl registers configuration support   Mark Rutland
• [PATCH] irqchip: renesas-intc: Document DT bindings   Mark Rutland
• [PATCH] irqchip: renesas-intc-irqpin: Update Documentation of DT bindings compat string and example   Mark Rutland
• [PATCH RESEND] irqchip: gic: fix boot for chained gics   Mark Rutland
• [PATCH 1/3] pwm: Add mc13xxx pwm driver.   Philippe Rétornaz
• [PATCH 00/11] Consolidate asm/fixmap.h files   Mark Salter
• [PATCH 01/11] Add generic fixmap.h   Mark Salter
• [PATCH 03/11] arm: use generic fixmap.h   Mark Salter
• [PATCH 03/11] arm: use generic fixmap.h   Mark Salter
• [PATCH 00/11] Consolidate asm/fixmap.h files   Mark Salter
• [PATCH v2 00/11] Consolidate asm/fixmap.h files   Mark Salter
• [PATCH v2 01/11] Add generic fixmap.h   Mark Salter
• [PATCH v2 03/11] arm: use generic fixmap.h   Mark Salter
• [PATCH 0/4] generic early_ioremap support   Mark Salter
• [PATCH 3/4] arm: add early_ioremap support   Mark Salter
• [PATCH 4/4] arm64: add early_ioremap support   Mark Salter
• [PATCH 0/3] arm64: Add EFI stub and runtime services support   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH 2/3] doc: arm64: add description of EFI stub support   Mark Salter
• [PATCH 3/3] arm64: add EFI runtime services   Mark Salter
• [PATCH] common: DMA-mapping: add DMA_ATTR_ALLOC_EXACT_SIZE attribute   Vandana Salve
• [PATCH v5 1/4] i2c: busses: i2c-st: Add ST I2C controller   Wolfram Sang
• [RESEND PATCH 1/4] i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver   Wolfram Sang
• [RESEND PATCH 2/4] i2c: i2c-bcm-kona: Add support for high-speed mode   Wolfram Sang
• [RESEND PATCH 2/4] i2c: i2c-bcm-kona: Add support for high-speed mode   Wolfram Sang
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Wolfram Sang
• [PATCH v6 1/4] i2c: busses: i2c-st: Add ST I2C controller   Wolfram Sang
• [PATCH v6 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Wolfram Sang
• [PATCH -next] tree-wide: add missing clk_disable_unprepare() on error in wmt_i2c_reset_hardware()   Wolfram Sang
• [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2   Wolfram Sang
• [PATCH 20/31] i2c: tegra: use reset framework   Wolfram Sang
• [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio   Wolfram Sang
• [PATCH v2 0/5] Add-Broadcom-Kona-I2C-Support   Wolfram Sang
• [Cocci] Warning masked by BUG() when CONFIG_BUG is enabled   Wolfram Sang
• [RFC] mtd: gpmc: add BCH support for plain AM335x   Wolfram Sang
• [RFC] mtd: gpmc: add BCH support for plain AM335x   Wolfram Sang
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Wolfram Sang
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   Wolfram Sang
• [PATCH v2] ARM: at91: sama5d3: reduce TWI internal clock frequency   Wolfram Sang
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Wolfram Sang
• [PATCH RFC] gpio controlled clock   Jyri Sarha
• [PATCH RFC] clk: add gpio controlled clock   Jyri Sarha
• [PATCH RFC] clk: add gpio controlled clock   Sarha, Jyri
• [PATCH v2 RFC] clk: add gpio controlled clock   Jyri Sarha
• [PATCH v3 RFC] clk: add gpio controlled clock   Jyri Sarha
• [PATCH RFC 0/9] Beaglebone-Black HDMI audio   Jyri Sarha
• [PATCH RFC 1/9] clk: add gpio controlled clock   Jyri Sarha
• [PATCH RFC 2/9] ASoC: davinci-evm: Add named clock reference to DT bindings   Jyri Sarha
• [PATCH RFC 3/9] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus   Jyri Sarha
• [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation   Jyri Sarha
• [PATCH RFC 5/9] ASoC: hdmi-codec: Add SNDRV_PCM_FMTBIT_32_LE playback format   Jyri Sarha
• [PATCH RFC 6/9] ASoC: davinci: HDMI audio build for AM33XX and TDA998x   Jyri Sarha
• [PATCH RFC 7/9] drm/tilcdc: Add I2C HDMI audio config for tda998x   Jyri Sarha
• [PATCH RFC 8/9] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support   Jyri Sarha
• [PATCH RFC 9/9] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support   Jyri Sarha
• [PATCH RFC] DTS Changes for Beaglebone-Black HDMI audio   Jyri Sarha
• [PATCH RFC] ARM/dts: am335x-boneblack: Add HDMI audio support   Jyri Sarha
• [PATCH RFC] ARM/dts: am335x-boneblack: Add HDMI audio support   Jyri Sarha
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Dr. H. Nikolaus Schaller
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Dr. H. Nikolaus Schaller
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Dr. H. Nikolaus Schaller
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Dr. H. Nikolaus Schaller
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Oskar Schirmer
• [PATCH] clk: tegra: use pll_ref as the pll_e parent   Peter De Schrijver
• [PATCH] clk: tegra: add FUSE clock device   Peter De Schrijver
• [PATCH 1/5] clk: tegra: fix blink clock rate   Peter De Schrijver
• [PATCH] clk: tegra: use pll_ref as the pll_e parent   Peter De Schrijver
• [PATCH 0/2] Tegra124 clock fixes   Peter De Schrijver
• [PATCH 1/2] clk: tegra: fix vi clk for Terga124   Peter De Schrijver
• [PATCH 2/2] clk: tegra: fix pllcx pdiv for Tegra124   Peter De Schrijver
• [PATCH] clk: tegra: add FUSE clock device   Peter De Schrijver
• [PATCH] clk: tegra: add TEGRA_DIVIDER_ROUND_UP for periph clks   Peter De Schrijver
• [PATCH] clk: tegra: fix return value check in tegra_clk_register_pllc()   Peter De Schrijver
• [PATCH] clk: tegra: add TEGRA_DIVIDER_ROUND_UP for periph clks   Peter De Schrijver
• pull request for clk-tegra-next   Peter De Schrijver
• [PATCHv9 05/43] CLK: TI: add DT alias clock registration mechanism   Matt Sealey
• [PATCH RFC] ARM: dts: imx6qdl: make pinctrl nodes board specific   Matt Sealey
• [PATCH v4] imx-drm: Add mx6 hdmi transmitter support   Matt Sealey
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Matt Sealey
• [PATCH RFC] ARM: dts: imx6qdl: make pinctrl nodes board specific   Matt Sealey
• imx-drm: Add HDMI support   Matt Sealey
• [PATCH v4] imx-drm: Add mx6 hdmi transmitter support   Matt Sealey
• [PATCH v4] imx-drm: Add mx6 hdmi transmitter support   Matt Sealey
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Matt Sealey
• ARM audit, seccomp, etc are broken wrt OABI syscalls   Matt Sealey
• [PATCH v6 4/8] ARM: dts: imx27 pinctrl   Matt Sealey
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Matt Sealey
• imx-drm: Add HDMI support   Matt Sealey
• imx-drm: Add HDMI support   Matt Sealey
• [PATCH v2] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions   Matt Sealey
• [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Matt Sealey
• [PATCH v2 3/4] ARM: imx51: use clock defines in DTS files   Matt Sealey
• [PATCH v2] ARM: remove name from machine_desc for DT platforms   Matt Sealey
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Matt Sealey
• ACPI   Matt Sealey
• ACPI   Matt Sealey
• ACPI   Matt Sealey
• [PATCH v6 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v6 2/2] PWM: atmel-pwm: add device tree binding document   Bo Shen
• [PATCH v6 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v7 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v7 2/2] PWM: atmel-pwm: add device tree binding document   Bo Shen
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v8 2/2] PWM: atmel-pwm: add device tree binding document   Bo Shen
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Bo Shen
• [PATCH 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Bo Shen
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Bo Shen
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Bo Shen
• [Patch v2 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Bo Shen
• [Patch v2 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Bo Shen
• [PATCH 1/2] ASoC: atmel: sam9x5_wm8731: fix oops when unload module   Bo Shen
• [PATCHv5] dmaengine: Add support for BCM2835   Shevchenko, Andriy
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Shevchenko, Andriy
• [PATCHv7] dmaengine: Add support for BCM2835   Shevchenko, Andriy
• [PATCHv3] ASoC: Add support for BCM2835   Shevchenko, Andriy
• [PATCH V2] dma: add channel request API that supports deferred probe   Shevchenko, Andriy
• [PATCH V3] dma: add channel request API that supports deferred probe   Shevchenko, Andriy
• [PATCH] dma: pl330: ensure DMA descriptors are zero-initialised   Shevchenko, Andriy
• [PATCHv5] dmaengine: Add support for BCM2835   Andy Shevchenko
• [PATCHv7] dmaengine: Add support for BCM2835   Andy Shevchenko
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Andy Shevchenko
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Andy Shevchenko
• a bug on NO_HZ_FULL_ALL   Alex Shi
• a bug on NO_HZ_FULL_ALL   Alex Shi
• a bug on NO_HZ_FULL_ALL   Alex Shi
• a bug on NO_HZ_FULL_ALL   Alex Shi
• 答复: a bug on NO_HZ_FULL_ALL   Alex Shi
• [PATCH v2 07/27] mtd: nand: pxa3xx: Early variant detection   Huang Shijie
• [PATCH v2 08/27] mtd: nand: pxa3xx: Use chip->cmdfunc instead of the internal   Huang Shijie
• [PATCH v2 09/27] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count   Huang Shijie
• [PATCH v2 10/27] mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize   Huang Shijie
• [PATCH v2 11/27] mtd: nand: pxa3xx: Disable OOB on arbitrary length commands   Huang Shijie
• [PATCH v2 12/27] mtd: nand: pxa3xx: Use a completion to signal device ready   Huang Shijie
• [PATCH bugfix] mtd: gpmi: serialize all the dma operations   Huang Shijie
• [PATCH bugfix] mtd: gpmi: serialize all the dma operations   Huang Shijie
• [PATCH bugfix] mtd: gpmi: serialize all the dma operations   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 1/4] mtd: spi-nor: move the SPI NOR commands to a new header file   Huang Shijie
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Huang Shijie
• [PATCH 3/4] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH 4/4] mtd: m25p80: use the new spi-nor APIs   Huang Shijie
• [PATCH 1/4] mtd: spi-nor: move the SPI NOR commands to a new header file   Huang Shijie
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Huang Shijie
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Huang Shijie
• [PATCH] serial: imx: add support for loopback mode.   Huang Shijie
• [PATCH 00/23] mtd: st_spi_fsm: Add new device   Huang Shijie
• [PATCH 1/3] ARM: __fixup_smp read of SCU config should do byteswap in BE case   Santosh Shilimkar
• [PATCH 2/3] ARM: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case   Santosh Shilimkar
• [PATCH 3/3] ARM: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE   Santosh Shilimkar
• [PATCH] ARM: Save/Restore 64-bit TTBR registers on LPAE suspend/resume   Santosh Shilimkar
• [PATCH 00/24] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH 01/24] mm/memblock: debug: correct displaying of upper memory boundary   Santosh Shilimkar
• [PATCH 02/24] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Santosh Shilimkar
• [PATCH 03/24] mm/bootmem: remove duplicated declaration of __free_pages_bootmem()   Santosh Shilimkar
• [PATCH 04/24] mm/block: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH 05/24] mm/memory_hotplug: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH 06/24] mm/staging: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH 07/24] mm/char: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH 08/24] mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignment   Santosh Shilimkar
• [PATCH 09/24] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH 10/24] mm/init: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 11/24] mm/printk: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 12/24] mm/page_alloc: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 13/24] mm/power: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 14/24] mm/lib/swiotlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 15/24] mm/lib/cpumask: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 16/24] mm/sparse: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 17/24] mm/hugetlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 18/24] mm/page_cgroup: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 19/24] mm/percpu: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 20/24] mm/memory_hotplug: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 21/24] mm/firmware: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 22/24] mm/ARM: kernel: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 23/24] mm/ARM: mm: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 24/24] mm/ARM: OMAP: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 14/24] mm/lib/swiotlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH 13/24] mm/power: Use memblock apis for early memory allocations   Santosh Shilimkar
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   Santosh Shilimkar
• Fwd: [PATCH 2/8] watchdog: davinci: use davinci_wdt_device structure to hold device data   Santosh Shilimkar
• Fwd: [PATCH 3/8] watchdog: davinci: add GET_TIMELEFT option support   Santosh Shilimkar
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   Santosh Shilimkar
• Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property   Santosh Shilimkar
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   Santosh Shilimkar
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   Santosh Shilimkar
• Fwd: [PATCH 8/8] arm: dts: keystone: add watchdog entry   Santosh Shilimkar
• [PATCH 01/12] mtd: nand: davinci: fix driver registration   Santosh Shilimkar
• [PATCH 02/12] mtd: nand: davinci: check required ti, davinci-chipselect property   Santosh Shilimkar
• [PATCH 03/12] mtd: nand: davinci: simplify error handling   Santosh Shilimkar
• [PATCH 04/12] mtd: nand: davinci: move bindings under mtd   Santosh Shilimkar
• [PATCH 05/12] mtd: nand: davinci: extend description of bindings   Santosh Shilimkar
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Santosh Shilimkar
• [PATCH 09/12] mtd: nand: davinci: reuse driver for Keystone arch   Santosh Shilimkar
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• [PATCH 11/12] mtd: nand: davinci: don't request AEMIF address range   Santosh Shilimkar
• [PATCH 12/12] arm: dts: keystone: add AEMIF/NAND device entry   Santosh Shilimkar
• Fwd: [PATCH 2/8] watchdog: davinci: use davinci_wdt_device structure to hold device data   Santosh Shilimkar
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• [PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Santosh Shilimkar
• [PATCH V3 2/7] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Santosh Shilimkar
• [PATCH V3 3/7] ARM: DTS: DRA: Add crossbar device binding   Santosh Shilimkar
• [PATCH V3 4/7] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs   Santosh Shilimkar
• [PATCH V3 5/7] ARM: DTS: DRA7: Add routable-irqs property for gic node   Santosh Shilimkar
• [PATCH V3 6/7] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number   Santosh Shilimkar
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Santosh Shilimkar
• [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX   Santosh Shilimkar
• [PATCH 04/24] mm/block: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH V4 0/3] ARM: DTS: DRA7: Updates for adding crossbar device   Santosh Shilimkar
• [PATCH V4 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Santosh Shilimkar
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• [PATCH 0/6] ARM/AMR64: Few patches on kvm and mm code   Santosh Shilimkar
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Santosh Shilimkar
• [PATCH 2/6] ARM: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Santosh Shilimkar
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH 4/6] arm64: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH 5/6] ARM: kvm: Use phys_addr_t instead of unsigned long in mm code   Santosh Shilimkar
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Santosh Shilimkar
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Santosh Shilimkar
• [PATCH 5/6] ARM: kvm: Use phys_addr_t instead of unsigned long in mm code   Santosh Shilimkar
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Santosh Shilimkar
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Santosh Shilimkar
• [PATCH 6/6] ARM: kvm: TMP: Commit the hyp page tables to main memory   Santosh Shilimkar
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Santosh Shilimkar
• [PATCH 4/6] arm64: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Santosh Shilimkar
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Santosh Shilimkar
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Santosh Shilimkar
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Santosh Shilimkar
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Santosh Shilimkar
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Santosh Shilimkar
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle   Santosh Shilimkar
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Santosh Shilimkar
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• [PATCH] ARM: OMAP2+: Fix undefined reference to set_cntfreq   Santosh Shilimkar
• [PATCH] ARM: OMAP2+: Fix undefined reference to set_cntfreq   Santosh Shilimkar
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Santosh Shilimkar
• [PATCH 1/4] clk: keystone: use clkod register bits for postdiv   Santosh Shilimkar
• [PATCH 2/4] keystone: dts: add/modify clock nodes   Santosh Shilimkar
• [PATCH 3/4] keystone: dts: fix typo in the ddr3 pllclk node name   Santosh Shilimkar
• [PATCH 4/4] keystone: dts: add paclk divider clock node   Santosh Shilimkar
• [PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Santosh Shilimkar
• [RESEND PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Santosh Shilimkar
• [PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Santosh Shilimkar
• [PATCH v2 0/4 - Keystone DTS and clock driver updates]   Santosh Shilimkar
• [PATCH] clk: keystone: gate: fix error handling on init   Santosh Shilimkar
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Santosh Shilimkar
• [PATCH 0/3] Reuse davinci-nand driver for Keystone arch   Santosh Shilimkar
• [PATCH] clk: keystone: gate: don't use reserved bits   Shilimkar, Santosh
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Santosh Shilimkar
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Santosh Shilimkar
• [PATCH] ARM: keystone: enable big endian support   Santosh Shilimkar
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Santosh Shilimkar
• [PATCH 0/3] ARM: mm: Switch ARM port to NO_BOOTMEM   Santosh Shilimkar
• [PATCH 1/3] ARM: mm: Fix max_mapnr with recent max*pfn updates   Santosh Shilimkar
• [PATCH 2/3] ARM: mm: Don't allow resizing of memblock data until "low" memory is not mapped   Santosh Shilimkar
• [PATCH 3/3] ARM: mm: Remove bootmem code and switch to NO_BOOTMEM   Santosh Shilimkar
• [PATCH 0/5] ARM: keystone: Misc updates   Santosh Shilimkar
• [PATCH 1/5] ARM: keystone: enable DMA zone for LPAE   Santosh Shilimkar
• [PATCH 2/5] ARM: keystone: Make PM bus ready before populating platform devices   Santosh Shilimkar
• [PATCH 3/5] ARM: keystone: Avoid calling of_clk_init() twice   Santosh Shilimkar
• [PATCH 4/5] MAINTAINERS: Add keystone git tree information   Santosh Shilimkar
• [PATCH 5/5] MAINTAINERS: Add keystone clock drivers   Santosh Shilimkar
• [PATCH 0/2] ARM: OMAP5: Couple of patches for KVM   Santosh Shilimkar
• [PATCH 1/2] ARM: dts: OMAP5: Add maintenance interrupt for virtualisation   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Santosh Shilimkar
• [PATCH 1/2] ARM: dts: OMAP5: Add maintenance interrupt for virtualisation   Santosh Shilimkar
• [PATCH 0/2] ARM: dts: Update the missing entries for KVM   Santosh Shilimkar
• [PATCH 1/2] ARM: dts: keystone: Add the GICV and GICH address space   Santosh Shilimkar
• [PATCH 2/2] ARM: dts: keystone: Add guestos maintenance interrupt   Santosh Shilimkar
• [PATCH] CMA: Fix the phys_addr_t print types   Santosh Shilimkar
• [PATCH] CMA: Fix the phys_addr_t print types   Santosh Shilimkar
• [PATCH] CMA: Fix the phys_addr_t print types   Santosh Shilimkar
• [PATCH 0/2] ARM: mm: Couple of fixes for setup_dma_zone()   Santosh Shilimkar
• [PATCH 1/2] ARM: mm: Fix the arm_dma_limit calculation   Santosh Shilimkar
• [PATCH 2/2] ARM: mm: Call setup_dma_zone() post early_paging_init()   Santosh Shilimkar
• [PATCH v2] CMA: Fix the phys_addr_t print types   Santosh Shilimkar
• [PATCH] CMA: Fix the phys_addr_t print types   Santosh Shilimkar
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Santosh Shilimkar
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Santosh Shilimkar
• HYP Kernel boot requirements [Was ...Re: [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs]   Santosh Shilimkar
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Santosh Shilimkar
• HYP Kernel boot requirements   Santosh Shilimkar
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   Santosh Shilimkar
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Santosh Shilimkar
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Santosh Shilimkar
• HYP Kernel boot requirements   Santosh Shilimkar
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Santosh Shilimkar
• [RFC] ARM Generic Timer + Interaction with WFI on Cortex-A15   Santosh Shilimkar
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Santosh Shilimkar
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   Santosh Shilimkar
• HYP Kernel boot requirements   Santosh Shilimkar
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   Santosh Shilimkar
• [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings   Santosh Shilimkar
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Santosh Shilimkar
• [PATCH v4 0/5] Update Davinci watchdog driver   Santosh Shilimkar
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH 1/2] memory: ti-aemif: introduce AEMIF driver   Santosh Shilimkar
• [PATCH 0/7] Davinci nand driver fixes and updates   Santosh Shilimkar
• [PATCH 1/2] memory: ti-aemif: introduce AEMIF driver   Santosh Shilimkar
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   Santosh Shilimkar
• [PATCH 00/24] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH] ARM: dts: i.MX51: Fix OTG PHY clock   Alexander Shiyan
• [PATCH 1/3] ARM: bcm: Remove non-existent GENERIC_TIME   Alexander Shiyan
• [PATCH 2/3] ARM: shmobile: Remove non-existent LOCAL_TIMERS   Alexander Shiyan
• [PATCH 3/3] ARM: omap2: Remove non-existent LOCAL_TIMERS   Alexander Shiyan
• [PATCH 1/5] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Alexander Shiyan
• [PATCH 2/5] ARM: dts: i.MX51: Update CPU node   Alexander Shiyan
• [PATCH 3/5] ARM: dts: i.MX51: Add dummy clock to AUDMUX   Alexander Shiyan
• [PATCH 4/5] ARM: dts: i.MX51: Add missing pinctrl definitions   Alexander Shiyan
• [PATCH 5/5] ARM: dts: i.MX51: Switch to use standard IRQ flags definitions   Alexander Shiyan
• [PATCH] ARM: i.MX5x: Add SAHARA clock for i.MX5x CPUs   Alexander Shiyan
• [PATCH] mfd: mx13xxx: Fix null pointer dereference in mc13xxx_common_init   Alexander Shiyan
• [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Alexander Shiyan
• [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Alexander Shiyan
• [PATCH 1/2] ARM: dts: i.MX27: Add SSI nodes   Alexander Shiyan
• [PATCH 2/2] ARM: dts: imx27-phytec-phycore-som: Update FEC node   Alexander Shiyan
• [PATCH v3 RESEND] ARM: imx: pllv1: Fix PLL calculation for i.MX27   Alexander Shiyan
• [PATCH] mfd: mc13xxx: Remove unneeded mc13xxx_lock/unlock   Alexander Shiyan
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Alexander Shiyan
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Alexander Shiyan
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Alexander Shiyan
• Re: [PATCH 1/5] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Alexander Shiyan
• [PATCH 1/3] can: mcp251x: Convert driver to use common clk framework   Alexander Shiyan
• Re: [PATCHv4][ 4/7] staging: imx-drm: parallel display: add regulator support.   Alexander Shiyan
• Re: [PATCH 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Alexander Shiyan
• Re: [PATCH] ARM:clps711x:Enable ARM_PATCH_PHYS_VIRT by default   Alexander Shiyan
• [PATCH 1/2] ARM: dts: i.MX51: Move usbphy0 node from AIPS1   Alexander Shiyan
• [PATCH 2/2] ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions   Alexander Shiyan
• Re: [PATCH v3 3/5] charger: max14577: Add charger support for Maxim 14577   Alexander Shiyan
• Re: [PATCH] ARM i.MX5: fix "shift" value for lp_apm_sel   Alexander Shiyan
• Re: [PATCH 2/2] ARM i.MX5: set CAN peripheral clock to 24 MHz parent   Alexander Shiyan
• [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Alexander Shiyan
• [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Alexander Shiyan
• [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1   Alexander Shiyan
• [PATCH 2/2] ARM: dts: imx51-babbage: Define FEC reset pin   Alexander Shiyan
• Re: [PATCH 1/3] pwm: Add mc13xxx pwm driver.   Alexander Shiyan
• Re: [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Alexander Shiyan
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Alexander Shiyan
• [PATCH RESEND] mfd: mc13xxx: Remove unneeded mc13xxx_lock/unlock   Alexander Shiyan
• [PATCH v3 RESEND] ARM: imx: pllv1: Fix PLL calculation for i.MX27   Alexander Shiyan
• [PATCH 1/4] ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support   Alexander Shiyan
• [PATCH 2/4] ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module   Alexander Shiyan
• [PATCH 3/4] ARM: dts: imx27-phytec-phycore-som: Update FEC node   Alexander Shiyan
• [PATCH 4/4] ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions   Alexander Shiyan
• [PATCH] ARM: dts: i.MX51: Move include "imx51-pinfunc.h" into "imx51-pingrp.h"   Alexander Shiyan
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Alexander Shiyan
• Re: [RFC/PATCH] NAND bus-width detection extreme makeover   Alexander Shiyan
• Re: [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Alexander Shiyan
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Alexander Shiyan
• [PATCH v2 9/9] ARM: dts: add usb udc support to bcm281xx   Sergei Shtylyov
• [PATCH] RM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Sergei Shtylyov
• [PATCH] RM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Sergei Shtylyov
• [PATCH] RM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Sergei Shtylyov
• [PATCH 03/14] ARM: shmobile: r8a7779: add HPB-DMAC support   Sergei Shtylyov
• [PATCH 03/14] ARM: shmobile: r8a7779: add HPB-DMAC support   Sergei Shtylyov
• [PATCH 03/14] ARM: shmobile: r8a7779: add HPB-DMAC support   Sergei Shtylyov
• [PATCH v2 0/5] ata: Add APM X-Gene SATA controller support   Sergei Shtylyov
• [PATCH] sh_eth: add R8A7791 support   Sergei Shtylyov
• [PATCH 0/2] Add Ether support for R8A7791/Koelsch board   Sergei Shtylyov
• [PATCH v2 0/3] Add Ether support for R8A7791/Koelsch board   Sergei Shtylyov
• [PATCH v2 1/3] ARM: shmobile: r8a7791: add Ether clock   Sergei Shtylyov
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v2 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig   Sergei Shtylyov
• [PATCH v2 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig   Sergei Shtylyov
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v2 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v2 4/4] arm64: Add APM X-Gene SoC 6.0Gbps SATA PHY DTS entries   Sergei Shtylyov
• [PATCH v2 1/4] PHY: Add function set_speed to generic PHY framework   Sergei Shtylyov
• [PATCH] ARM: shmobile: lager: Constify lager_boards_compat_dt   Sergei Shtylyov
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Sergei Shtylyov
• [PATCH 1/3] ARM: shmobile: r8a7779: add HSPI clock support for DT   Sergei Shtylyov
• [RFC 08/17] ARM: shmobile: r8a7779: Add helper to read mode pins   Sergei Shtylyov
• [RFC 13/17] ARM: shmobile: marzen-reference: Initialize CPG device   Sergei Shtylyov
• [PATCH v3 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Sergei Shtylyov
• [PATCH RFC v2 07/17] ARM: shmobile: r8a7779: Sort headers alphabetically   Sergei Shtylyov
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Sergei Shtylyov
• [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support   Sergei Shtylyov
• [PATCH] serial: pl011: remove redundant early amba_ports declaration   Baruch Siach
• [PATCH] ARM : Kill CONFIG_MTD_PARTITIONS   Baruch Siach
• [PATCH 01/28] dmaengine: use DMA_COMPLETE for dma completion status   Sebastian Andrzej Siewior
• [RESEND PATCH v3 2/4] usb: musb: Bugfix of_node assignment   Sebastian Andrzej Siewior
• [PATCH v2] ARM: mm: Fix ECC mem policy printk   Michal Simek
• [PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code   Michal Simek
• [PATCH v2 1/2] mmc: arasan: Add driver for Arasan SDHCI   Michal Simek
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Michal Simek
• [PATCH 00/11] Consolidate asm/fixmap.h files   Michal Simek
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Michal Simek
• [PATCH 00/11] Consolidate asm/fixmap.h files   Michal Simek
• [PATCH 1/3] arm: delete __cpuinit/__CPUINIT usage from all ARM users   Michal Simek
• [PATCH v2 1/2] mmc: arasan: Add driver for Arasan SDHCI   Michal Simek
• [PATCHv9 01/43] clk: Add support for regmap register read/write   Gerhard Sittig
• [PATCH v5 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v5 01/17] powerpc/fsl-pci: improve clock API use   Gerhard Sittig
• [PATCH v5 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
• [PATCH v5 03/17] dts: mpc512x: add clock related device tree specs   Gerhard Sittig
• [PATCH v5 04/17] clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled)   Gerhard Sittig
• [PATCH v5 05/17] clk: mpc512x: add backwards compat to the CCF code   Gerhard Sittig
• [PATCH v5 06/17] dts: mpc512x: add clock specs for client lookups   Gerhard Sittig
• [PATCH v5 07/17] clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK   Gerhard Sittig
• [PATCH v5 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
• [PATCH v5 09/17] serial: mpc512x: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v5 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Gerhard Sittig
• [PATCH v5 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v5 12/17] mtd: mpc5121_nfc: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v5 13/17] [media] fsl-viu: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v5 14/17] net: can: mscan: adjust to common clock support for mpc512x   Gerhard Sittig
• [PATCH v5 15/17] net: can: mscan: remove non-CCF code for MPC512x   Gerhard Sittig
• [PATCH v5 16/17] powerpc/mpc512x: improve DIU related clock setup   Gerhard Sittig
• [PATCH v5 17/17] clk: mpc512x: remove migration support workarounds   Gerhard Sittig
• [PATCH v5 01/17] powerpc/fsl-pci: improve clock API use   Gerhard Sittig
• [PATCH v5 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v5 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Gerhard Sittig
• NULL clock items (was: [PATCH 11/31] dma: add channel request API that supports deferred probe)   Gerhard Sittig
• [PATCH v6 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v6 01/17] powerpc/fsl-pci: improve clock API use   Gerhard Sittig
• [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
• [PATCH v6 03/17] dts: mpc512x: add clock related device tree specs   Gerhard Sittig
• [PATCH v6 04/17] clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled)   Gerhard Sittig
• [PATCH v6 05/17] clk: mpc512x: add backwards compat to the CCF code   Gerhard Sittig
• [PATCH v6 06/17] dts: mpc512x: add clock specs for client lookups   Gerhard Sittig
• [PATCH v6 07/17] clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK   Gerhard Sittig
• [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
• [PATCH v6 09/17] serial: mpc512x: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v6 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Gerhard Sittig
• [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v6 12/17] mtd: mpc5121_nfc: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v6 13/17] [media] fsl-viu: adjust for OF based clock lookup   Gerhard Sittig
• [PATCH v6 14/17] net: can: mscan: adjust to common clock support for mpc512x   Gerhard Sittig
• [PATCH v6 15/17] net: can: mscan: remove non-CCF code for MPC512x   Gerhard Sittig
• [PATCH v6 16/17] powerpc/mpc512x: improve DIU related clock setup   Gerhard Sittig
• [PATCH v6 17/17] clk: mpc512x: remove migration support workarounds   Gerhard Sittig
• [PATCH v2 5/6] ASoC: sirf-inner: add mach driver for SiRFSoC internal codec   Barry Song
• [PATCH] dmaengine: sirf: enable generic dt binding for dma channels   Barry Song
• [PATCH] spi: sirf: move to use generic dma dt-binding   Barry Song
• [PATCH] ARM: Kill CONFIG_MTD_PARTITIONS   Eunbong Song
• [PATCH] ARM : Kill CONFIG_MTD_PARTITIONS   Eunbong Song
• [PATCH] ARM : Kill CONFIG_MTD_PARTITIONS   Eunbong Song
• [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Arend van Spriel
• OMAP build failure after this merge window - caused by usb or phy Kconfig krap   Arend van Spriel
• [PATCH v9 01/18] arm: make SWIOTLB available   Stefano Stabellini
• [PATCH v9 16/18] arm,arm64: do not always merge biovec if we are running on Xen   Stefano Stabellini
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Stefano Stabellini
• [PATCH] arm,arm64: Conditionalize bio_vec usage   Stefano Stabellini
• [PATCH v9 03/18] arm/xen,arm64/xen: introduce p2m   Stefano Stabellini
• [PATCH] ARM: rename ioremap_cached to ioremap_cache   Stefano Stabellini
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Stefano Stabellini
• [PATCH 0/2] swiotlb-xen fixes   Stefano Stabellini
• [PATCH 1/2] swiotlb-xen: add missing xen_dma_map_page call   Stefano Stabellini
• [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Stefano Stabellini
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Stefano Stabellini
• [Xen-devel] [PATCH 1/2] swiotlb-xen: add missing xen_dma_map_page call   Stefano Stabellini
• [Xen-devel] [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Stefano Stabellini
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Stefano Stabellini
• [Xen-devel] [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Stefano Stabellini
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Stefano Stabellini
• [PATCH] xen/arm: remove !CPU_V6 and !GENERIC_ATOMIC64 build dependencies for XEN   Stefano Stabellini
• Physical memory start contraints in the Linux kernel (Was: Re: Xen osstest on Calxeda midway progress (Was: Re: [Xen-devel] [xen-unstable test] 21486: tolerable FAIL - PUSHED))   Stefano Stabellini
• [PATCH] xen/arm: remove !CPU_V6 and !GENERIC_ATOMIC64 build dependencies for XEN   Stefano Stabellini
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Stefano Stabellini
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Stefano Stabellini
• [PATCH v2] arm: remove !CPU_V6 and !GENERIC_ATOMIC64 build dependencies for XEN   Stefano Stabellini
• xen drivers fail to link on ARM with v3.12-9888-gf63c482   Stefano Stabellini
• [PATCH] xen/arm: p2m_init and p2m_lock should be static   Stefano Stabellini
• ACPI vs DT at runtime   Stefano Stabellini
• ACPI vs DT at runtime   Stefano Stabellini
• [PATCH] arm/xen: Export phys_to_mach to fix Xen module link errors   Stefano Stabellini
• ACPI vs DT at runtime   Stefano Stabellini
• ACPI vs DT at runtime   Stefano Stabellini
• ACPI   Stefano Stabellini
• ACPI   Stefano Stabellini
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Lucas Stach
• [PATCH 0/3] devicetree includes for i.MX5 clocks   Lucas Stach
• [PATCH 1/3] clk: imx5: introduce DT includes for clock provider   Lucas Stach
• [PATCH 2/3] ARM: imx53: use clock defines in DTS files   Lucas Stach
• [PATCH 3/3] ARM: imx51: use clock defines in DTS files   Lucas Stach
• [PATCH v2 1/4] clk: imx5: introduce DT includes for clock provider   Lucas Stach
• [PATCH v2 2/4] ARM: imx53: use clock defines in DTS files   Lucas Stach
• [PATCH v2 3/4] ARM: imx51: use clock defines in DTS files   Lucas Stach
• [PATCH v2 4/4] ARM: imx50: use clock defines in DTS files   Lucas Stach
• [PATCH v3 1/4] clk: imx5: introduce DT includes for clock provider   Lucas Stach
• [PATCH v3 2/4] ARM: imx53: use clock defines in DTS files   Lucas Stach
• [PATCH v3 3/4] ARM: imx51: use clock defines in DTS files   Lucas Stach
• [PATCH v3 4/4] ARM: imx50: use clock defines in DTS files   Lucas Stach
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Lucas Stach
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Lucas Stach
• [PATCH] ARM: DT: imx6qdl: fix can clocks   Lucas Stach
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Lucas Stach
• [PATCH] IMX6: Add static /8 prescaler to can_root clock configuration   Lucas Stach
• [PATCH 1/3] serial: mxs-auart: implement flush_buffer hook   Lucas Stach
• [PATCH] clk: propagate parent change up one level   Tomasz Stanislawski
• [PATCH] phy: Add exynos-phy driver   Tomasz Stanislawski
• [PATCH] phy: Add exynos-phy driver   Tomasz Stanislawski
• [PATCH 27/31] USB: EHCI: tegra: use reset framework   Alan Stern
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Alan Stern
• [PATCH 1/2] ARM: lpc32xx: delete local <mach/gpio.h> header   Roland Stigge
• [PATCH 2/2] ARM: lpc32xx: move custom GPIO header   Roland Stigge
• [PATCH v4 3/6] gpio: davinci: use irqdomain   Grygorii Strashko
• [PATCH v4 4/6] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH v4 4/6] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Grygorii Strashko
• [PATCH v4 4/6] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks   Grygorii Strashko
• [PATCH v5 1/7] gpio: davinci: remove unnecessary printk   Grygorii Strashko
• [PATCH v5 5/7] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH 0/2] DaVinci: GPIO: fixes   Grygorii Strashko
• [PATCH v5 5/7] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH v5 0/7] gpio: daVinci: cleanup and feature enhancement   Grygorii Strashko
• [PATCH 0/2] DaVinci: GPIO: fixes   Grygorii Strashko
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   Grygorii Strashko
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Grygorii Strashko
• [PATCH 1/6] watchdog: davinci: change driver to use WDT core   Grygorii Strashko
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Grygorii Strashko
• [PATCH] clk: keystone: gate: fix error handling on init   Grygorii Strashko
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Grygorii Strashko
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Grygorii Strashko
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Grygorii Strashko
• [PATCH 0/7] Davinci nand driver fixes and updates   Grygorii Strashko
• [PATCH 0/3] Reuse davinci-nand driver for Keystone arch   Grygorii Strashko
• [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set   Grygorii Strashko
• [PATCH 06/12] mtd: nand: davinci: adjust DT properties to MTD generic   Grygorii Strashko
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Grygorii Strashko
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   Grygorii Strashko
• [PATCH v6 4/6] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Grygorii Strashko
• [PATCH v3 0/6] Update Davinci watchdog driver   Grygorii Strashko
• [PATCH v6 4/6] gpio: davinci: add OF support   Grygorii Strashko
• [PATCH v4 0/5] Update Davinci watchdog driver   Grygorii Strashko
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Grygorii Strashko
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Grygorii Strashko
• [PATCH 1/2] memory: ti-aemif: introduce AEMIF driver   Grygorii Strashko
• [PATCH 0/7] Davinci nand driver fixes and updates   Grygorii Strashko
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Heiko Stübner
• [patch] pinctrl: rockchip: testing the wrong variable   Heiko Stübner
• [patch] pinctrl: rockchip: missing unlock on error in rockchip_set_pull()   Heiko Stübner
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Michal Suchanek
• [PATCH v2] ARM: sunxi: dt: add EMAC aliases   Michal Suchanek
• a bug on NO_HZ_FULL_ALL   Shaojie Sun
• [PATCH 4/4] ARM: ep93xx: stop using mach/timex.h   Hartley Sweeten
• [PATCH v2 4/4] ARM: ep93xx: stop using mach/timex.h   Hartley Sweeten
• [PATCH 0/2] Revert support for reserved memory regions defined in device tree   Marek Szyprowski
• [PATCH] CMA: Fix the phys_addr_t print types   Marek Szyprowski
• [PATCH v2] CMA: Fix the phys_addr_t print types   Marek Szyprowski
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Timur Tabi
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Timur Tabi
• [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Timur Tabi
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Timur Tabi
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Timur Tabi
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Timur Tabi
• [alsa-devel] [PATCH] ASoC: fsl-ssi: fix SDMA starvation   Timur Tabi
• [PATCH 0/4] arm64: Add audit support   AKASHI Takahiro
• [PATCH 1/4] audit: Enable arm64 support   AKASHI Takahiro
• [PATCH 2/4] arm64: Add audit support   AKASHI Takahiro
• [PATCH 3/4] arm64: audit: Add AArch32 support   AKASHI Takahiro
• [PATCH 4/4] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH 0/4] arm64: Add audit support   AKASHI Takahiro
• [PATCH 2/4] arm64: Add audit support   AKASHI Takahiro
• [PATCH 3/4] arm64: audit: Add AArch32 support   AKASHI Takahiro
• [PATCH RFC 4/6] arm64: Add kernel return probes support(kretprobes)   AKASHI Takahiro
• [PATCH v5 2/7] arm64: introduce interfaces to hotpatch kernel and module code   AKASHI Takahiro
• [PATCHv2] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Daniel Tang
• [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Daniel Tang
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• ARM network performance and dma_mask (was: [BUG, REGRESSION?] 3.11.6+, 3.12: GbE iface rate drops to few KB/s)   Willy Tarreau
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Willy Tarreau
• ARM network performance and dma_mask   Willy Tarreau
• [PATCH] fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM   Brent Taylor
• [next:master 23/358] undefined reference to `i2c_add_adapter'   Samuel Thibault
• [next:master 23/358] undefined reference to `input_led_disconnect'   Samuel Thibault
• [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers   Srikanth Thokala
• [PATCH 2/2] net: emaclite: add barriers to support Xilinx Zynq platform   Srikanth Thokala
• [PATCHv9][ 1/3] Input: tsc2007: Add device tree support.   Dmitry Torokhov
• [PATCH 26/31] Input: tegra-kbc - use reset framework   Dmitry Torokhov
• [PATCH 4/5 v3] input: tc3589x-keypad: support probing from device tree   Dmitry Torokhov
• [PATCH] input: ixp4xx-beeper: don't use symbols from <mach/timex.h>   Dmitry Torokhov
• crypto dependency in bit sliced AES   Linus Torvalds
• crypto dependency in bit sliced AES   Linus Torvalds
• crypto dependency in bit sliced AES   Linus Torvalds
• [PATCH] linux/err.h: Provide an ERR_PTR_IO that returns an __iomem pointer   Josh Triplett
• PCI: mvebu: return NULL instead of ERR_PTR(ret)   Josh Triplett
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Steffen Trumtrar
• [PATCH 1/4] ARM: socfpga: clk: remove unused field   Steffen Trumtrar
• [PATCH 2/4] ARM: socfpga: clk: fix define typo   Steffen Trumtrar
• [PATCH 3/4] ARM: socfpga: clk: split clk code   Steffen Trumtrar
• [PATCH 4/4] ARM: socfpga: clk: add clk_divider to periph   Steffen Trumtrar
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Steffen Trumtrar
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Steffen Trumtrar
• [PATCH 0/4] Socfpga: clk: trivial fixes and cleanup   Steffen Trumtrar
• [PATCH v4 00/17] ARM: at91: move to common clk framework   Mike Turquette
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   Mike Turquette
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   Mike Turquette
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   Mike Turquette
• [PATCH v11 2/2] ARM: dts: enable clock binding on Hi3620   Mike Turquette
• [PATCH v11 1/2] clk: hisilicon: add common clock support   Mike Turquette
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Mike Turquette
• [PATCH RESEND AGAIN] clk: clean up everything on debugfs error   Mike Turquette
• [PATCH V4 1/6] clk: exynos-audss: convert to platform device   Mike Turquette
• [PATCH V4 1/6] clk: exynos-audss: convert to platform device   Mike Turquette
• [PATCH v11 1/2] clk: hisilicon: add common clock support   Mike Turquette
• [PATCH] clk: fixed-factor: Fix device-tree binding typo   Mike Turquette
• [GIT PULL] clk: socfpga: Clock fix for 3.13   Mike Turquette
• [PATCH 1/2] arm: socfpga: Add clock for smp_twd timer   Mike Turquette
• [PATCH v5 06/17] clk: at91: add PMC pll clocks   Mike Turquette
• [PATCH v5 08/17] clk: at91: add PMC system clocks   Mike Turquette
• [PATCH v5 00/17] ARM: at91: move to common clk framework   Mike Turquette
• [PATCH v6 00/16] ARM: at91: move to common clk framework   Mike Turquette
• [PATCH v3 0/4] Exynos 5410 Dual cluster support   Vyacheslav Tyrtov
• [PATCH v3 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Vyacheslav Tyrtov
• [PATCH v3 2/4] clk: exynos5410: register clocks using common clock framework   Vyacheslav Tyrtov
• [PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Vyacheslav Tyrtov
• [PATCH v3 4/4] ARM: dts: Add initial device tree support for EXYNOS5410   Vyacheslav Tyrtov
• [PATCH v4 0/4] Exynos 5410 Dual cluster support   Vyacheslav Tyrtov
• [PATCH v4 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Vyacheslav Tyrtov
• [PATCH v4 2/4] clk: exynos5410: register clocks using common clock framework   Vyacheslav Tyrtov
• [PATCH v4 3/4] ARM: dts: Add initial device tree support for EXYNOS5410   Vyacheslav Tyrtov
• [PATCH v4 4/4] ARM: EXYNOS: add Exynos Dual Cluster Support   Vyacheslav Tyrtov
• [PATCH V4] clk: palmas: add clock driver for palmas   Peter Ujfalusi
• [PATCH] ARM: davinci: Fix McASP mem resource names   Peter Ujfalusi
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Peter Ujfalusi
• [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)   Peter Ujfalusi
• [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)   Peter Ujfalusi
• [PATCHv2 3/7] ARM: imx: add support code for IMX50 based machines   Greg Ungerer
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Greg Ungerer
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Greg Ungerer
• [PATCH] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Greg Ungerer
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   Greg Ungerer
• [PATCH] ARM: ks8695: delete local <mach/gpio.h> header   Greg Ungerer
• [PATCHv4][ 1/6] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*   Geert Uytterhoeven
• [PATCH v2 19/19] fbdev: sh-mobile-lcdcfb: Enable the driver on all ARM platforms   Geert Uytterhoeven
• [PATCH -v2] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings   Geert Uytterhoeven
• [PATCH] RFC: framebuffer: provide generic get_fb_unmapped_area   Geert Uytterhoeven
• [PATCH] RFC: framebuffer: provide generic get_fb_unmapped_area   Geert Uytterhoeven
• [PATCH 24/24] asm-generic: Rename int-ll64.h to types.h   Geert Uytterhoeven
• [PATCH 1/3] arm: delete __cpuinit/__CPUINIT usage from all ARM users   Francesco VIRLINZI
• [PATCH 1/3] arm: delete __cpuinit/__CPUINIT usage from all ARM users   Francesco VIRLINZI
• [PATCH] thermal: imx_thermal: add module device table   Eduardo Valentin
• [PATCHv5 09/20] arm: dts: add omap4 CPU thermal data   Eduardo Valentin
• [PATCHv5 10/20] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCHv5 11/20] arm: dts: add omap4460 thermal data   Eduardo Valentin
• [PATCHv5 12/20] arm: dts: add cooling properties on omap4430 cpu node   Eduardo Valentin
• [PATCHv5 13/20] arm: dts: add cooling properties on omap4460 cpu node   Eduardo Valentin
• [PATCHv5 14/20] arm: dts: add omap5 GPU thermal data   Eduardo Valentin
• [PATCHv5 15/20] arm: dts: add omap5 CORE thermal data   Eduardo Valentin
• [PATCHv5 16/20] arm: dts: add omap5 thermal data   Eduardo Valentin
• [PATCHv5 17/20] arm: dts: add cooling properties on omap5 cpu node   Eduardo Valentin
• [PATCHv5 18/20] arm: dts: make OMAP443x bandgap node to belong to OCP   Eduardo Valentin
• [PATCHv5 19/20] arm: dts: make OMAP4460 bandgap node to belong to OCP   Eduardo Valentin
• [PATCHv5 10/20] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCH V2] media: i2c: Add ADV761X support   Valentine
• [PATCH] clk: divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH] clk: divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Tomi Valkeinen
• [PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare   Tomi Valkeinen
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Tomi Valkeinen
• [PATCH 3/5] ARM: OMAP2+: Add DT init code for DPI displays and make omap3 LDP to use it   Tomi Valkeinen
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.   Tomi Valkeinen
• [PATCH v2 00/11]: add remaining support for IGEP boards   Tomi Valkeinen
• [PATCH -v2] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings   Tomi Valkeinen
• [PATCH -v2] fbdev: sh_mobile_meram: Fix defined but not used compiler warnings   Tomi Valkeinen
• [PATCH] ath6kl: sdio: fix system panic when doing wifi stress test   Kalle Valo
• [PATCH] PCI: imx6: fix imprecise abort handler   Marek Vasut
• [PATCH] ARM: pxa/colibri: fix build with CONFIG_USB_OHCI_HCD=y   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 0/6] PCI: imx6: Random fixes   Marek Vasut
• [PATCH 1/3] ARM: dts: imx53: Fix display pinmux for M53EVK   Marek Vasut
• [PATCH 2/3] ARM: dts: imx53: Fix backlight for M53EVK   Marek Vasut
• [PATCH 3/3] ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen   Marek Vasut
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH 2/5] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH 3/5] ARM: imx: imx53: Add SATA PHY clock   Marek Vasut
• [PATCH 4/5] ARM: dts: imx53: Add AHCI SATA binding   Marek Vasut
• [PATCH 5/5] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Marek Vasut
• [PATCH] ARM: dts: imx53: Add USB support for M53EVK   Marek Vasut
• [PATCH V2 1/5] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH V2 2/5] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH 3/5] ARM: imx: imx53: Add SATA PHY clock   Marek Vasut
• [PATCH 4/5] ARM: dts: imx53: Add AHCI SATA binding   Marek Vasut
• [PATCH 5/5] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Marek Vasut
• [PATCH] ARM: dts: imx53: Add USB support for M53EVK   Marek Vasut
• [PATCH 4/5] ARM: dts: imx53: Add AHCI SATA binding   Marek Vasut
• [PATCH V3 1/5] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH V3 2/5] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH V2 3/5] ARM: imx: imx53: Add SATA PHY clock   Marek Vasut
• [PATCH V2 4/5] ARM: dts: imx53: Add AHCI SATA DT node   Marek Vasut
• [PATCH V2 5/5] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Marek Vasut
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH V4 2/6] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH V4 3/6] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH V2 4/6] ARM: imx: imx53: Add SATA PHY clock   Marek Vasut
• [PATCH V2 5/6] ARM: dts: imx53: Add AHCI SATA DT node   Marek Vasut
• [PATCH 6/6] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Marek Vasut
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH] backlight: pwm_bl: Do not make the regulator mandatory   Marek Vasut
• [RESEND PATCH 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH V2 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH V5 2/6] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH V5 3/6] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH V2 4/6] ARM: imx: imx53: Add SATA PHY clock   Marek Vasut
• [PATCH 5/6] ARM: dts: imx53: Add AHCI SATA DT node   Marek Vasut
• [PATCH 6/6] ARM: dts: imx53: Enable AHCI SATA for M53EVK   Marek Vasut
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Marek Vasut
• [PATCH V3 1/3] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH V6 2/3] ahci: imx: Pull out the clock enable/disable calls   Marek Vasut
• [PATCH V6 3/3] ahci: imx: Add i.MX53 support   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 3/7] PCI: imx6: Fix waiting for link up   Marek Vasut
• [PATCH 4/7] PCI: imx6: Split away the PHY reset   Marek Vasut
• [PATCH 5/7] PCI: imx6: Split away the link up wait loop   Marek Vasut
• [PATCH 6/7] PCI: imx6: Fix link start operation   Marek Vasut
• [PATCH 7/7] ARM: dts: imx6q-sabrelite: Enable PCI express   Marek Vasut
• [PATCH 6/7] PCI: imx6: Fix link start operation   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Marek Vasut
• [PATCH 3/4] mtd: spi-nor: add the framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 2/4] mtd: spi-nor: add a new data structrue spi_nor{}   Marek Vasut
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 0/3] serial: mxs-auart: flush_buffer hook and interrupt processing   Marek Vasut
• [PATCH 1/3] serial: mxs-auart: implement flush_buffer hook   Marek Vasut
• [PATCH 3/3] serial: mxs-auart: move irq handling to a tasklet   Marek Vasut
• [PATCH 1/3] serial: mxs-auart: implement flush_buffer hook   Marek Vasut
• [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode   Florian Vaussard
• [PATCH V4 1/6] clk: exynos-audss: convert to platform device   Padma Venkat
• [PATCH] ASoC: samsung: Initialize the dma_data for secondary dai   Padmavathi Venna
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Hans Verkuil
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Hans Verkuil
• [PATCH v4] videobuf2: Add missing lock held on vb2_fop_relase   Hans Verkuil
• [PATCH v5] videobuf2: Add missing lock held on vb2_fop_relase   Hans Verkuil
• [PATCH v7] videobuf2: Add missing lock held on vb2_fop_relase   Hans Verkuil
• [PATCH] ARM: asm: Configure caches as per the defconfig   Amit Virdi
• [PATCH] ARM: asm: Configure caches as per the defconfig   Amit Virdi
• [PATCH] ARM: asm: Configure caches as per the defconfig   Amit Virdi
• [BUG] PandaBoard hangs before starting init while booting v3.12   Lokesh Vutla
• [PATCH] ARM: footbridge: fix build warning   Linus Walleij
• [PATCHv7][ 1/4] Input: tsc2007: Add device tree support.   Linus Walleij
• [GIT PULL FOR v3.13] SH Mobile PFC patches   Linus Walleij
• [PATCH 1/1] pinctrl: imx: fix using pin->input_val wrongly   Linus Walleij
• [PATCHv9][ 4/6] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Linus Walleij
• [PATCH] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH 1/4] ARM/serial: at91: move machine quirk into machine   Linus Walleij
• [PATCH 2/4] ALSA: atmel: remove dependency on <mach/gpio.h>   Linus Walleij
• [PATCH 3/4] pinctrl: at91: copy define to driver   Linus Walleij
• [PATCH 4/4] ARM: at91: localize GPIO header   Linus Walleij
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Linus Walleij
• [PATCH] ARM: u300: fix timekeeping when periodic mode is used   Linus Walleij
• [PATCH] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Linus Walleij
• [PATCH v5 1/4] ARM: deprecate mach/timex.h for !ARCH_MULTIPLATFORM   Linus Walleij
• [PATCH 1/4] ARM/serial: at91: move machine quirk into machine   Linus Walleij
• [PATCH] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Linus Walleij
• [PATCHv2] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   Linus Walleij
• [PATCH] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• [PATCH v2] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH] gpio: pl061: don't depend on CONFIG_ARM   Linus Walleij
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Linus Walleij
• [PATCH v4 1/6] gpio: davinci: Fixed a check for unbanked gpio   Linus Walleij
• [PATCH 01/13] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Linus Walleij
• [PATCH 02/13] dma: ste_dma40: Parse flags property for new 'high priority channel' request   Linus Walleij
• [PATCH 03/13] ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion   Linus Walleij
• [PATCH 04/13] ARM: ux500: Add DMA config bindings for MSP devices   Linus Walleij
• [PATCH 05/13] ARM: ux500: Add ID properties to 'simply' differentiate between MSPs   Linus Walleij
• [PATCH 07/13] ASoC: ux500_pcm: Extract MSP IDs from Device Tree   Linus Walleij
• [PATCH 09/13] ASoC: Ux500: Match platform by device node when booting Device Tree   Linus Walleij
• [PATCH 10/13] ASoC: ux500_pcm: Extend Device Tree support to deal with DMA data   Linus Walleij
• [PATCH 11/13] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Linus Walleij
• [PATCH 12/13] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Linus Walleij
• [PATCH 13/13] ASoC: ux500_pcm: Take out pointless dev_dbg() call   Linus Walleij
• [PATCH 06/13] ASoC: ux500_pcm: Extend ux500 MSP binding for enumeration   Linus Walleij
• [PATCH 1/7] ARM: ux500: Remove legacy ATAG SSP support   Linus Walleij
• [PATCH 2/7] ARM: ux500: Consolidate [A|D]8500 platform data   Linus Walleij
• [PATCH v3] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• PINCTRL:We May need mutex protect in pinctrl API   Linus Walleij
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Linus Walleij
• [PATCH v6 4/8] ARM: dts: imx27 pinctrl   Linus Walleij
• [PATCH 3/7] ARM: ux500: Remove ATAG support for SDI (MMC)   Linus Walleij
• [PATCH] MAINTAINERS: drop discontinued mailing list   Linus Walleij
• [PATCH v7] pinctrl: imx27: imx27 pincontrol driver   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH v6 4/8] ARM: dts: imx27 pinctrl   Linus Walleij
• [PATCH 1/4] ARM: sa1100: add irq handler to prepare MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH 1/7] ARM: sa1100: switch to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH 0/7] ARM: sa1100: IRQ/GPIO refactoring   Linus Walleij
• [PATCH 2/7] ARM: sa1100: use an irqdomain for the high GPIO IRQs   Linus Walleij
• [PATCH 3/7] ARM: sa1100: refer to hardware IRQs step 1   Linus Walleij
• [PATCH 4/7] ARM: sa1100: use hardware IRQ bit masks   Linus Walleij
• [PATCH 5/7] ARM: sa1100: move GPIO masks to state container   Linus Walleij
• [PATCH 6/7] ARM: sa1100: rewrite the high GPIO IRQ handler   Linus Walleij
• [PATCH 7/7] ARM: sa1100: move state to the overall container   Linus Walleij
• [PATCH 1/4 v3] mfd: tc3589x: Add device tree bindings   Linus Walleij
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Linus Walleij
• [PATCH 5/5 v2] ARM: ux500: adjust the TC3589x devices to the binding   Linus Walleij
• [PATCH 4/5 v3] input: tc3589x-keypad: support probing from device tree   Linus Walleij
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Linus Walleij
• [PATCH 1/7] ARM: sa1100: switch to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed   Linus Walleij
• [PATCH 04/13] ARM: ux500: Add DMA config bindings for MSP devices   Linus Walleij
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Linus Walleij
• [PATCH 1/2] Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings"   Linus Walleij
• [PATCH 2/2] Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots"   Linus Walleij
• [PATCH] pinctrl: nomadik: always display IRQ in debugfs   Linus Walleij
• [PATCH] ARM: nomadik: get rid of explicit ethernet GPIO management   Linus Walleij
• [PATCH 00/21] ARM: ux500: pin control device tree migration   Linus Walleij
• [PATCH 01/21] ARM: ux500: move UART pin control to the device tree   Linus Walleij
• [PATCH 02/21] ARM: ux500: move I2C pin control to the device tree   Linus Walleij
• [PATCH 03/21] ARM: ux500: move MMC/SD/SDIO pin control to the device tree   Linus Walleij
• [PATCH 04/21] ARM: ux500: move MSP pin control to the device tree   Linus Walleij
• [PATCH 05/21] ARM: ux500: move GPIO217/218 config to device tree   Linus Walleij
• [PATCH 06/21] ARM: ux500: move MUSB pin config to device tree   Linus Walleij
• [PATCH 07/21] ARM: ux500: move SPI pin config to device tree   Linus Walleij
• [PATCH 08/21] ARM: ux500: create MCDE node to collect resources   Linus Walleij
• [PATCH 09/21] ARM: ux500: move MCDE pin config to device tree   Linus Walleij
• [PATCH 10/21] ARM: ux500: move SKE pin config to device tree   Linus Walleij
• [PATCH 11/21] ARM: ux500: drop STM pinmap settings   Linus Walleij
• [PATCH 12/21] ARM: ux500: move old HREF ipgpio to the device tree   Linus Walleij
• [PATCH 13/21] ARM: ux500: move GPIO key configuration to device tree   Linus Walleij
• [PATCH 14/21] ARM: ux500: move the WLAN GPIO pin setup to the device tree   Linus Walleij
• [PATCH 15/21] ARM: ux500: move the HREFv60plus IPGPIO pins to device tree   Linus Walleij
• [PATCH 16/21] ARM: ux500: move final HREFv60 LCD pins to device tree   Linus Walleij
• [PATCH 17/21] ARM: ux500: move HREFv60plus pin configs to device tree   Linus Walleij
• [PATCH 18/21] ARM: ux500: move snowball ethernet config to device tree   Linus Walleij
• [PATCH 19/21] ARM: ux500: convert Snowball SPI pin reference   Linus Walleij
• [PATCH 20/21] ARM: ux500: move snowball LED pin control to device tree   Linus Walleij
• [PATCH 21/21] ARM: ux500: move snowball pin configs to device tree   Linus Walleij
• [PATCH 02/10] mtd: st_spi_fsm: Supply all register address and bit logic defines   Linus Walleij
• [PATCH 2/2] ARM: pxa: delete the custom GPIO header   Linus Walleij
• [PATCH 1/2] gpio: davinci: Fix a check for unbanked gpio   Linus Walleij
• [PATCH] MAINTAINERS: Add maintainer for the ARM Ux500 clock driver   Linus Walleij
• [PATCH v5 2/7] gpio: davinci: use readl/writel instead of __raw_*   Linus Walleij
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Linus Walleij
• [PATCH v5 5/7] gpio: davinci: add OF support   Linus Walleij
• PINCTRL:We May need mutex protect in pinctrl API   Linus Walleij
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Linus Walleij
• [PATCH 6/8] gpio: twl4030: Fix passing of pdata in the device tree case   Linus Walleij
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Linus Walleij
• [patch] pinctrl: rockchip: testing the wrong variable   Linus Walleij
• [patch] mfd: ab8500-debugfs: move dereference after check for NULL   Linus Walleij
• [PATCH V4 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Linus Walleij
• [patch] pinctrl: rockchip: missing unlock on error in rockchip_set_pull()   Linus Walleij
• [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed   Linus Walleij
• [PATCH] pinctrl: imx: drop redundant OF dependency   Linus Walleij
• [PATCH 4/9] ARM: sa1100: convert gpio driver to be a proper platform driver   Linus Walleij
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Linus Walleij
• [PATCH] pinctrl: imx1-core populate subdevices   Linus Walleij
• [PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Linus Walleij
• [PATCH v7 0/7] pinctrl: imx27: imx27 pincontrol driver   Linus Walleij
• [PATCH v7 7/7] ARM: imx27: enable pinctrl   Linus Walleij
• [PATCH] gpio: Remove duplicate include of errno.h   Linus Walleij
• [PATCH 0/9] ARM: sa1100: Rework IRQ handling   Linus Walleij
• [PATCH v5 3/7] gpio: davinci: use irqdomain   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH 4/7] ARM: ux500: Clean-up non-DT IRQ initialisation   Linus Walleij
• [PATCH 5/7] ARM: ux500: Remove unused call to register AMBA devices   Linus Walleij
• [PATCH 6/7] ARM: ux500: Clean-up legacy extern prototype   Linus Walleij
• [PATCH 7/7] ARM: ux500: Remove checking for DT during timer init as we are now DT only   Linus Walleij
• [PATCH 01/10] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag   Linus Walleij
• [PATCH 02/10] dma: ste_dma40: Parse flags property for new 'high priority channel' request   Linus Walleij
• [PATCH 04/10] ARM: ux500: Add DMA config bindings for MSP devices   Linus Walleij
• [PATCH 1/2] ARM: ux500: decomission the non-DT MTU init sequence   Linus Walleij
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Linus Walleij
• [PATCH] ARM: ux500: decomission custom SMP TWD timer init   Linus Walleij
• [PATCH] ARM: ux500: delete remnant pin config macros   Linus Walleij
• [PATCH] ARM: ux500: delete Nomadik pinctrl AUXDATA   Linus Walleij
• [PATCH] ARM: ux500: get rid of unused header   Linus Walleij
• [PATCH] pinctrl: nomadik: decomission non-DT boot path   Linus Walleij
• [PATCH 1/2] ARM: ux500: decomission the non-DT MTU init sequence   Linus Walleij
• [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path   Linus Walleij
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Linus Walleij
• [PATCH] ARM: ks8695: delete local <mach/gpio.h> header   Linus Walleij
• [PATCH 1/2] ARM: lpc32xx: delete local <mach/gpio.h> header   Linus Walleij
• [PATCH 2/2] ARM: lpc32xx: move custom GPIO header   Linus Walleij
• [PATCH] ARM: mv78xx0: delete local <mach/gpio.h> header   Linus Walleij
• ACPI   Linus Walleij
• [PATCH 1/2] clk: versatile: pass a name to ICST clock provider   Linus Walleij
• [PATCH 2/2] clk: versatile: fixup IM-PD1 clock implementation   Linus Walleij
• ACPI   Linus Walleij
• [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver   Linus Walleij
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Linus Walleij
• [PATCH] pinctrl: provide documentation pointer   Linus Walleij
• [PATCH] pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes   Linus Walleij
• [PATCH 0/6] arm: sa1100: refactor h3xxx GPIO handling   Linus Walleij
• [PATCH 1/6] arm: sa1100: h3100: refactor LCD GPIO handling   Linus Walleij
• [PATCH 2/6] arm: sa1100: h3600: refactor LCD GPIO handling   Linus Walleij
• [PATCH 3/6] arm: sa1100: h3100: refactor IrDA GPIO handling   Linus Walleij
• [PATCH 4/6] arm: sa1100: h3600: refactor IrDA GPIO handling   Linus Walleij
• [PATCH 5/6] arm: sa1100: h3xxx: move serial port GPIO handling to common place   Linus Walleij
• [PATCH 6/6] arm: sa1100: h3xxx: drop hand-coded gpio_request_array analogue   Linus Walleij
• [PATCH 1/6] arm: sa1100: h3100: refactor LCD GPIO handling   Linus Walleij
• [PATCH] ARM: u300: fix timekeeping when periodic mode is used   Linus Walleij
• ACPI   Linus Walleij
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Linus Walleij
• [GIT PULL] ux500 fixes for v3.13-rcN   Linus Walleij
• [GIT PULL] ux500 defconfig changed for v3.13-rcs   Linus Walleij
• [GIT PULL] ux500 devicetree changes for v3.14, take one   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• [PATCH] Versatile LEDs initialise to off state   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• [PATCH] serial: pl011: use DMA RX polling by default   Linus Walleij
• ACPI   Linus Walleij
• [PATCH v6 3/6] gpio: davinci: remove unused variable intc_irq_num   Linus Walleij
• [PATCH v6 4/6] gpio: davinci: add OF support   Linus Walleij
• [PATCH v6 0/6] gpio: daVinci: cleanup and feature enhancement   Linus Walleij
• [PATCH v6 2/6] This patch converts the davinci gpio driver to use irqdomain support.   Linus Walleij
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• [PATCH V2] media: i2c: Add ADV761X support   Linus Walleij
• STOP THE MADNESS   Linus Walleij
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Linus Walleij
• [PATCH V2] media: i2c: Add ADV761X support   Linus Walleij
• [PATCH V2] media: i2c: Add ADV761X support   Linus Walleij
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Linus Walleij
• [PATCH V2] media: i2c: Add ADV761X support   Linus Walleij
• [PATCH V2] media: i2c: Add ADV761X support   Linus Walleij
• [PATCH v6] gpio: Add MOXA ART GPIO driver   Linus Walleij
• [PATCH v7] gpio: Add MOXA ART GPIO driver   Linus Walleij
• Tegra baseline test results for v3.12   Paul Walmsley
• OMAP baseline test results for v3.12   Paul Walmsley
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Paul Walmsley
• [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume   Paul Walmsley
• [PATCH] Documentation/Changes: update binutils version requirement for ARMv7 builds   Paul Walmsley
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Paul Walmsley
• [PATCH] ARM: OMAP2+: hwmod: check for module address space during init   Paul Walmsley
• Patches from ARM folks solicited for the -stable tree   Paul Walmsley
• OMAP baseline test results for v3.13-rc1 (toolchain CodeSourcery 2010.09-50)   Paul Walmsley
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Paul Walmsley
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Paul Walmsley
• Tegra baseline test results for v3.13-rc1   Paul Walmsley
• clk: clk_round_rate() should return 0, not negative numbers, upon error   Paul Walmsley
• clk: clk_round_rate() should return 0, not negative numbers, upon error   Paul Walmsley
• [PATCH v2] clk: clk_round_rate() should return 0, not negative numbers, upon error   Paul Walmsley
• [PATCH] ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error   Paul Walmsley
• [PATCH] ARM: davinci: clock: return 0 upon error from clk_round_rate()   Paul Walmsley
• [PATCH] ARM: versatile: clock: return 0 upon error from clk_round_rate()   Paul Walmsley
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Paul Walmsley
• [PATCH v5 00/14] Armada 370/XP NAND support   Ricard Wanderlof
• [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s   Cong Wang
• [PATCH 00/11] RFC: Common machine reset handling   Stephen Warren
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Stephen Warren
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Stephen Warren
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Stephen Warren
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Stephen Warren
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Stephen Warren
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Stephen Warren
• [PATCH] I2C: BCM2835: Linking platform nodes to adapter nodes   Stephen Warren
• [PATCH] clk: add flags to distinguish xtal clocks   Stephen Warren
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Stephen Warren
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Stephen Warren
• [PATCH] ARM: tegra: init fuse before setting reset handler   Stephen Warren
• [PATCH] ARM: tegra: init fuse before setting reset handler   Stephen Warren
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Stephen Warren
• [PATCH v10 4/7] ARM: tegra: add support for Trusted Foundations   Stephen Warren
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Stephen Warren
• [RFC PATCH dtc] C-based DT schema checker integrated into dtc   Stephen Warren
• [PATCHv4 0/7] Unifying SMMU driver among Tegra SoCs   Stephen Warren
• [PATCHv4 1/7] ARM: tegra: Create a DT header defining SWGROUP ID   Stephen Warren
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Stephen Warren
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Stephen Warren
• [PATCHv4 3/7] iommu/tegra: smmu: Register IOMMU'able devices dynamically   Stephen Warren
• [PATCHv4 3/7] iommu/tegra: smmu: Register IOMMU'able devices dynamically   Stephen Warren
• [PATCHv4 4/7] iommu/tegra: smmu: Calculate ASID register offset by ID   Stephen Warren
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Stephen Warren
• [PATCHv4 7/7] iommu/tegra: smmu: Allow duplicate ASID wirte   Stephen Warren
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Stephen Warren
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Stephen Warren
• [PATCHv4 2/7] driver/core: Populate IOMMU'able devices in order   Stephen Warren
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Stephen Warren
• [PATCHv4 5/7] iommu/tegra: smmu: Support "mmu-masters" binding   Stephen Warren
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Stephen Warren
• [RFC DTC PATCH] dtc: add symlink (-L) output to dtbs   Stephen Warren
• [PATCHv4 1/7] ARM: tegra: Create a DT header defining SWGROUP ID   Stephen Warren
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Stephen Warren
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Stephen Warren
• [PATCH 04/31] ARM: tegra: update DT files to add reset properties   Stephen Warren
• [PATCH 05/31] ARM: tegra: update DT files to add DMA properties   Stephen Warren
• [PATCH 06/31] ARM: tegra: select the reset framework   Stephen Warren
• [PATCH 07/31] clk: tegra: implement a reset driver   Stephen Warren
• [PATCH 08/31] pci: tegra: use reset framework   Stephen Warren
• [PATCH 09/31] drm/tegra: use reset framework   Stephen Warren
• [PATCH 10/31] ARM: tegra: pass reset to tegra_powergate_sequence_power_up()   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 12/31] dma: tegra: use reset framework   Stephen Warren
• [PATCH 13/31] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 14/31] ASoC: dmaengine: support deferred probe for DMA channels   Stephen Warren
• [PATCH 15/31] ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config   Stephen Warren
• [PATCH 16/31] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Stephen Warren
• [PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()   Stephen Warren
• [PATCH 19/31] ASoC: tegra: convert to standard DMA DT bindings   Stephen Warren
• [PATCH 20/31] i2c: tegra: use reset framework   Stephen Warren
• [PATCH 21/31] staging: nvec: use reset framework   Stephen Warren
• [PATCH 22/31] spi: tegra: use reset framework   Stephen Warren
• [PATCH 23/31] spi: tegra: convert to standard DMA DT bindings   Stephen Warren
• [PATCH 24/31] serial: tegra: use reset framework   Stephen Warren
• [PATCH 25/31] serial: tegra: convert to standard DMA DT bindings   Stephen Warren
• [PATCH 26/31] Input: tegra-kbc - use reset framework   Stephen Warren
• [PATCH 27/31] USB: EHCI: tegra: use reset framework   Stephen Warren
• [PATCH 28/31] ARM: tegra: remove legacy clock entries from DT   Stephen Warren
• [PATCH 29/31] ARM: tegra: remove legacy DMA entries from DT   Stephen Warren
• [PATCH 30/31] clk: tegra: remove legacy reset APIs   Stephen Warren
• [PATCH 31/31] clk: tegra: remove bogus PCIE_XCLK   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH] Documentation/Changes: update binutils version requirement for ARMv7 builds   Stephen Warren
• [PATCH] ARM: move firmware_ops to drivers/firmware   Stephen Warren
• [PATCH] ARM: move firmware_ops to drivers/firmware   Stephen Warren
• ARM topic: Is DT on ARM the solution, or is there something better?   Stephen Warren
• [PATCH] ARM: move firmware_ops to drivers/firmware   Stephen Warren
• [PATCH 16/31] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Stephen Warren
• [PATCH 23/31] spi: tegra: convert to standard DMA DT bindings   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH] ARM: move firmware_ops to drivers/firmware   Stephen Warren
• [alsa-devel] [PATCH 14/31] ASoC: dmaengine: support deferred probe for DMA channels   Stephen Warren
• [PATCH 15/31] ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config   Stephen Warren
• [RFC PATCH V2 1/2] dtc: add 'compat' output option, prints board string   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH V2] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 17/31] ASoC: tegra: call pm_runtime APIs around register accesses   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V3 1/2] scripts: dtc: build fdtget for extracting properties from dtbs   Stephen Warren
• [PATCH V2] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• ARM topic: Is DT on ARM the solution, or is there something better?   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Stephen Warren
• [PATCH] pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes   Stephen Warren
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [RFC PATCH V2 2/2] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Stephen Warren
• [PATCHv5 3/9] ARM: tegra: create a DT header defining SWGROUP ID   Stephen Warren
• [PATCHv5 4/9] iommu/tegra: smmu: register device to iommu dynamically   Stephen Warren
• [PATCHv5 6/9] iommu/tegra: smmu: get swgroups from DT "iommus="   Stephen Warren
• [PATCH V4] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Stephen Warren
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Stephen Warren
• [PATCH V4] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Stephen Warren
• [PATCH 13/31] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• Report from 2013 ARM kernel summit   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 1/5] clk: tegra: fix blink clock rate   Stephen Warren
• [PATCH 2/5] clk: tegra: remove some redundant defines from Tegra114   Stephen Warren
• [PATCH 3/5] clk: tegra: remove some redundant defines from Tegra30   Stephen Warren
• [PATCH 4/5] clk: tegra: remove some redunant defines from Tegra20   Stephen Warren
• [PATCH 5/5] clk: tegra: remove some redundant defines from Tegra124   Stephen Warren
• [PATCH] ARM: kernel: Detect DTB overwrite and error out   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• Report from 2013 ARM kernel summit   Stephen Warren
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Stephen Warren
• [PATCHv5 1/9] of: introduce of_property_for_earch_phandle_with_args()   Stephen Warren
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Stephen Warren
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Stephen Warren
• [PATCH V5] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH] ARM: kernel: Detect DTB overwrite and error out   Stephen Warren
• [PATCH v10 0/7] ARM: support for Trusted Foundations secure monitor   Stephen Warren
• [PATCH] clk: tegra: add FUSE clock device   Stephen Warren
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Stephen Warren
• [PATCH] clk: tegra: add FUSE clock device   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCHv5 2/9] driver/core: populate devices in order for IOMMUs   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH] ARM: bcm2835: add missing #xxx-cells to I2C nodes   Stephen Warren
• [PATCH] pinctrl: provide documentation pointer   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH] ARM: tegra: Provide dummy powergate implementation   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH V3] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH V2] serial: tegra: convert to standard DMA DT bindings   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 16/31] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH V2 0/3] ARM: tegra: use common reset and DMA bindings   Stephen Warren
• [PATCH V2 1/3] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH V2 2/3] ARM: tegra: document reset properties in DT bindings   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: document use of standard DMA DT bindings   Stephen Warren
• [PATCH 12/31] dma: tegra: use reset framework   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: document use of standard DMA DT bindings   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 1/3] ARM: tegra: fix DEBUG_LL combined with LPAE   Stephen Warren
• [PATCH 2/3] ARM: tegra: don't hard-code DEBUG_LL baud rate   Stephen Warren
• [PATCH 3/3] ARM: tegra: use section-sized static mappings for LPAE too   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH] I2C: BCM2835: Linking platform nodes to adapter nodes   Stephen Warren
• [PATCH] ARM: bcm2835: add missing #xxx-cells to I2C nodes   Stephen Warren
• [PATCH 16/31] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH V3] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH 16/31] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH] clk: tegra: add TEGRA_DIVIDER_ROUND_UP for periph clks   Stephen Warren
• [PATCH V2] ASoC: tegra: use reset framework   Stephen Warren
• [PATCH 1/3] mfd: tps6586x: add version detection   Stephen Warren
• [PATCH 2/3] regulator: tps6586x: add voltage table for tps658643   Stephen Warren
• [PATCH 3/3] ARM: tegra: set SM2 voltage correct   Stephen Warren
• [PATCH v11 7/7] ARM: tegra: support Trusted Foundations by default   Stephen Warren
• [PATCH RFC] clk: add gpio controlled clock   Lothar Waßmann
• [PATCH RFC] clk: add gpio controlled clock   Lothar Waßmann
• [PATCHv9][ 4/6] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Lothar Waßmann
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Lothar Waßmann
• [PATCHv9][ 3/3] ARM: dts: cpuimx35 Add touchscreen support.   Lothar Waßmann
• a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• 答复: a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• a bug on NO_HZ_FULL_ALL   Frederic Weisbecker
• [PATCH 14/24] mm/lib/swiotlb: Use memblock apis for early memory allocations   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 1/2] swiotlb-xen: add missing xen_dma_map_page call   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 2/2] swiotlb-xen: xen_swiotlb_map_page: do not error out if dma_capable fails   Konrad Rzeszutek Wilk
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH V3] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH V2] dma: tegra: register as an OF DMA controller   Dan Williams
• [PATCH V2] dma: tegra: register as an OF DMA controller   Dan Williams
• [PATCH V3] dma: add channel request API that supports deferred probe   Dan Williams
• [PATCH v4] dmaengine: Add hisilicon k3 DMA engine driver   Dan Williams
• Build warning in drivers/dma/mmp_tdma.c   Dan Williams
• [PATCH 11/31] dma: add channel request API that supports deferred probe   Williams, Dan J
• [PATCH v5 01/17] powerpc/fsl-pci: improve clock API use   Scott Wood
• [PATCH 0/2] ARM: at91: sama5d3: add sama5d36ek support   Josh Wu
• [PATCH 1/2] ARM: at91: sama5d3: add support for sama5d36 chip   Josh Wu
• [PATCH 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts file   Josh Wu
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Josh Wu
• [PATCH 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts file   Josh Wu
• [PATCH v2 0/2] ARM: at91: sama5d3: add sama5d36ek support   Josh Wu
• [PATCH v2 1/2] ARM: at91: sama5d3: add support for sama5d36 chip   Josh Wu
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Josh Wu
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Josh Wu
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Josh Wu
• [PATCH v3 0/2] ARM: at91: sama5d3: add sama5d36ek support   Josh Wu
• [PATCH v3 1/2] ARM: at91: sama5d3: add support for sama5d36 chip   Josh Wu
• [PATCH v3 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   Josh Wu
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Josh Wu
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Josh Wu
• [PATCH] mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected   Josh Wu
• [PATCH v3 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Rafael J. Wysocki
• [PATCH v3 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Rafael J. Wysocki
• [PATCH 13/24] mm/power: Use memblock apis for early memory allocations   Rafael J. Wysocki
• [PATCH RFC 07/10] PM / wakeup : Introduce device_child_may_wakeup   Rafael J. Wysocki
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• pm_runtime functions and IS_ERR_VALUE (was Re: [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks)   Rafael J. Wysocki
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• Donation of Allwinner-based CubieTruck to anyone interested in developing & upstreaming   Arokux X
• Donation of Allwinner-based CubieTruck to anyone interested in developing & upstreaming   Arokux X
• [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.   Li Xiubo
• [PATCHv1 0/8] ALSA: Add SAI driver and enable SGT15000 codec   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Li Xiubo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Li Xiubo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator.   Li Xiubo
• [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver.   Li Xiubo
• [alsa-devel] [PATCHv1 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver.   Li Xiubo
• [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver.   Li Xiubo
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li Xiubo
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li Xiubo
• [PATCHv6 0/4] Add Freescale FTM PWM driver.   Li Xiubo
• [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li Xiubo
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [BUG] PandaBoard hangs before starting init while booting v3.12   Chao Xu
• [BUG] PandaBoard hangs before starting init while booting v3.12   Chao Xu
• [BUG] PandaBoard hangs before starting init while booting v3.12   Chao Xu
• [PATCH RESEND 0/7] crypto: at91/atmel: add Device Tree support   Herbert Xu
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Herbert Xu
• crypto dependency in bit sliced AES   Herbert Xu
• crypto dependency in bit sliced AES   Herbert Xu
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH -next] tree-wide: add missing clk_disable_unprepare() on error in wmt_i2c_reset_hardware()   Wei Yongjun
• [PATCH] spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()   Wei Yongjun
• [PATCH -next] iommu/arm-smmu: fix error return code in arm_smmu_device_dt_probe()   Wei Yongjun
• [PATCH -next] iommu/arm-smmu: fix potential NULL pointer dereference in arm_smmu_map()   Wei Yongjun
• [PATCH v3 1/4] reset: Add Allwinner SoCs Reset Controller Driver   Philipp Zabel
• [PATCHv3 1/8] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*   Philipp Zabel
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Philipp Zabel
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Philipp Zabel
• [PATCH v4 0/4] Add support for the Allwinner A31 Reset Controllers   Philipp Zabel
• [PATCH 0/4] arm: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH 1/4] arm: highbank: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH v5 1/3] arm: mvebu: add missing of_node_put() to fix reference leak   Jisheng Zhang
• [PATCH 2/4] arm: imx: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH v5 2/3] bus: mvebu: add missing of_node_put() to fix reference leak   Jisheng Zhang
• [PATCH 3/4] arm: prima2: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH v5 3/3] pinctrl: mvebu: Convert to use devm_ioremap_resource   Jisheng Zhang
• [PATCH 4/4] arm: socfgpa: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH 0/4] arm: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH V2 0/4] arm: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH V2 1/4] arm: highbank: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH V2 2/4] arm: imx: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH V2 3/4] arm: prima2: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH V2 4/4] arm: socfgpa: make use of common scu_a9_get_base() interface   Jisheng Zhang
• [PATCH] ARM: l2x0: add prefetch and power ctrl registers configuration support   Jisheng Zhang
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Jisheng Zhang
• [PATCH v3 8/9] ARM: add Armada 1500-mini and Chromecast device tree files   Jisheng Zhang
• [PATCH v3 4/9] ARM: add Marvell Berlin SoC familiy to Marvell doc   Jisheng Zhang
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Jisheng Zhang
• [PATCH] clk: mvebu: staticize of_cpu_clk_setup   Jisheng Zhang
• [PATCH] arm: mvebu: fix some sparse warnings   Jisheng Zhang
• [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs   Jisheng Zhang
• [PATCH] ARM: l2x0: add prefetch and power ctrl registers configuration support   Jisheng Zhang
• [PATCH 1/5] ahci: imx: Pull out the clock enable/disable calls   Richard Zhu
• [PATCH V3 2/5] ahci: imx: Add i.MX53 support   Richard Zhu
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Richard Zhu
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Richard Zhu
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Richard Zhu
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH v11 0/6] enable hi3xxx SoC   Haojian Zhuang
• [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH v11 2/6] ARM: dts: enable hi4511 with device tree   Haojian Zhuang
• [PATCH v11 3/6] ARM: config: enable hi3xxx in multi_v7_defconfig   Haojian Zhuang
• [PATCH v11 4/6] ARM: config: add defconfig for Hi3xxx   Haojian Zhuang
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Haojian Zhuang
• [PATCH v11 6/6] ARM: hi3xxx: add hotplug support   Haojian Zhuang
• [PATCH v2 09/27] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count   Haojian Zhuang
• [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Haojian Zhuang
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Haojian Zhuang
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Haojian Zhuang
• [PATCH v11 0/2] Enable clock driver of Hi3620 SoC   Haojian Zhuang
• [PATCH v11 1/2] clk: hisilicon: add common clock support   Haojian Zhuang
• [PATCH v11 2/2] ARM: dts: enable clock binding on Hi3620   Haojian Zhuang
• [PATCH 3/4] ARM: mmp: stop using mach/timex.h   Haojian Zhuang
• [PATCH] rtc: pxa: drop usage of CLOCK_TICK_RATE   Haojian Zhuang
• [PATCH v11 1/2] clk: hisilicon: add common clock support   Haojian Zhuang
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Haojian Zhuang
• [GIT PULL][for 3.14] pull request to enable Hisilicon SoC from pxa git tree   Haojian Zhuang
• [PATCH v11 2/2] ARM: dts: enable clock binding on Hi3620   Haojian Zhuang
• [PATCH v11 5/6] ARM: hi3xxx: add smp support   Haojian Zhuang
• [GIT PULL][for 3.14] pull request to enable Hisilicon SoC from pxa git tree   Haojian Zhuang
• STOP THE MADNESS   Haojian Zhuang
• [PATCH] rtc: pxa: drop usage of CLOCK_TICK_RATE   Haojian Zhuang
• [PATCH RFC 2/6] arm64: Kprobes with single stepping support   Peter Zijlstra
• [PATCH v2 0/5] ata: Add APM X-Gene SATA controller support   Bartlomiej Zolnierkiewicz
• [PATCH v2 0/5] ata: Add APM X-Gene SATA controller support   Bartlomiej Zolnierkiewicz
• [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Bartlomiej Zolnierkiewicz
• [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8   Bartlomiej Zolnierkiewicz
• [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577   Bartlomiej Zolnierkiewicz
• [PATCH v3 0/2] arm/arm64: KVM: BE guest support   Marc Zyngier
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Marc Zyngier
• [PATCH v3 2/2] arm/arm64: KVM: propagate caller endianness to the incomming vcpu   Marc Zyngier
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Marc Zyngier
• [PATCH v3 1/2] arm/arm64: KVM: MMIO support for BE guest   Marc Zyngier
• [PATCH] ARM: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER   Marc Zyngier
• [linux-sunxi] [PATCH 2/2] ARM: sun6i: Add SMP support for the Allwinner A31   Marc Zyngier
• [PATCH V2 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Marc Zyngier
• [PATCH V4] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Marc Zyngier
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Marc Zyngier
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Marc Zyngier
• [PATCH 5/6] ARM: kvm: Use phys_addr_t instead of unsigned long in mm code   Marc Zyngier
• [PATCH 4/6] arm64: mm: Drop the lowmem watermark check from virt_addr_valid()   Marc Zyngier
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Marc Zyngier
• [PATCH 3/6] ARM: mm: Drop the lowmem watermark check from virt_addr_valid()   Marc Zyngier
• [PATCH 1/6] arm64: mm: Add __virt_to_idmap() to keep kvm build happy   Marc Zyngier
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Marc Zyngier
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Marc Zyngier
• [PATCH] arm/arm64: KVM: introduce new mapping API for percpu mappings   Marc Zyngier
• Some question about GIC v1 setting   Marc Zyngier
• [PATCH] arm/arm64: KVM: Fix hyp mappings of vmalloc regions   Marc Zyngier
• [PATCH V3 2/2] arm64: perf: add support for percpu pmu interrupt   Marc Zyngier
• [PATCH V3 2/2] arm64: perf: add support for percpu pmu interrupt   Marc Zyngier
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Marc Zyngier
• [PATCH V4 2/2] arm64: perf: add support for percpu pmu interrupt   Marc Zyngier
• [PATCH 1/1] irq-gic: add capability to set bypass flag in GIC   Marc Zyngier
• Some question about GIC v1 setting   Marc Zyngier
• [PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs   Marc Zyngier
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Marc Zyngier
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Marc Zyngier
• [PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Marc Zyngier
• [PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Marc Zyngier
• [PATCHv2 0/4] socfpga: Enable SD/MMC support   dinguyen at altera.com
• [PATCHv2 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager   dinguyen at altera.com
• [PATCHv2 2/4] arm: dts: Add a system manager compatible property   dinguyen at altera.com
• [PATCHv2 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific functionality   dinguyen at altera.com
• [PATCH] clk: socfpga: Correct the parent clock for l3_sp_clk and dbg_clk   dinguyen at altera.com
• Доброго времени суток   aniss2312
• [PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA   ludovic.desroches at atmel.com
• [PATCH 1/2] ARM: at91: at91sam9g45: set default mmc pinctrl-names   ludovic.desroches at atmel.com
• [PATCH 2/2] ARM: at91: at91sam9g45: add i2c pinctrl   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   ludovic.desroches at atmel.com
• [PATCH v2] ARM: at91: sama5d3: reduce TWI internal clock frequency   ludovic.desroches at atmel.com
• [PATCH] watchdog: at91sam9_wdt: various fixes   boris brezillon
• [PATCH] watchdog: at91sam9_wdt: various fixes   boris brezillon
• [PATCH 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts file   boris brezillon
• [PATCH v2 2/2] ARM: at91: sama5d3/dt: add sama5d36ek dts files   boris brezillon
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH 01/11] ARM: at91: dt: at91rm9200ek: add emac and nor flash support   boris brezillon
• [PATCH 02/11] ARM: at91: switch 1arm to DT   boris brezillon
• [PATCH 02/11] ARM: at91: switch 1arm to DT   boris brezillon
• [PATCH 02/11] ARM: at91: switch 1arm to DT   boris brezillon
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH 2/9] ARM: at91/dt: add ethernet phy to at91rm9200ek board   boris brezillon
• [RFC PATCH RESEND 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH 3/9] ARM: at91/dt: add usb1 vbus and pullup pins   boris brezillon
• [PATCH 1/9] ARM: at91/dt: add rm9200 spi0 chip select pins definitions   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• [PATCH 7/9] ARM: at91/dt: add i2c devices connected to at91rm9200ek board   boris brezillon
• [PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board   boris brezillon
• [PATCH 1/9] ARM: at91/dt: add rm9200 spi0 chip select pins definitions   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• [PATCH] ARM: at91: sama5d3: reduce TWI internal clock frequency   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   boris brezillon
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   boris brezillon
• [PATCH v2 0/2] clk: add clk accuracy support   boris brezillon
• [PATCH v5 06/17] clk: at91: add PMC pll clocks   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• pinctrl - detailed gpio-mode pinconf design   kevin.bracey at broadcom.com
• Donation of Allwinner-based CubieTruck to anyone interested in developing & upstreaming   maxime.ripard at free-electrons.com
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei gao
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei gao
• [PATCH] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   dt.tangr at gmail.com
• [PATCHv2] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   dt.tangr at gmail.com
• [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   dt.tangr at gmail.com
• [PATCH RESEND] arm: add save_stack_trace_regs() support   ivan.lam2014 at gmail.com
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   mohun106 at gmail.com
• [RFC PATCH 1/2] arm64: Add 48-bit PA support for 4KB page size   mohun106 at gmail.com
• [RFC PATCH 2/2] arm64: Add 48-bit PA support for 64KB page size   mohun106 at gmail.com
• [PATCH v4 0/4] AArch64: KGDB support   vijay.kilari at gmail.com
• [PATCH v4 1/4] arm64: support single-step and breakpoint handler hooks   vijay.kilari at gmail.com
• [PATCH v4 2/4] AArch64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [PATCH v4 3/4] AArch64: KGDB: Add step debugging support   vijay.kilari at gmail.com
• [PATCH v4 4/4] KGDB: make kgdb_breakpoint() as noinline   vijay.kilari at gmail.com
• [RFC v1 PATCH] ARM64: KGDB: Add FPSIMD debug support   vijay.kilari at gmail.com
• [RFC v1 PATCH] ARM64: KGDB: Add FP/SIMD debug support   vijay.kilari at gmail.com
• [RFC v2 PATCH 0/1] ARM64: KGDB: Add FPSIMD debug support   vijay.kilari at gmail.com
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   vijay.kilari at gmail.com
• [PATCH v5 0/4] AArch64: KGDB support   vijay.kilari at gmail.com
• [PATCH v5 1/4] arm64: support single-step and breakpoint handler hooks   vijay.kilari at gmail.com
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [PATCH v5 3/4] AArch64: KGDB: Add step debugging support   vijay.kilari at gmail.com
• [PATCH v5 4/4] KGDB: make kgdb_breakpoint() as noinline   vijay.kilari at gmail.com
• Fwd: [PATCH 0/8] Update Davinci watchdog driver   ivan.khoronzhuk
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• Fwd: [PATCH 2/8] watchdog: davinci: use davinci_wdt_device structure to hold device data   ivan.khoronzhuk
• Fwd: [PATCH 3/8] watchdog: davinci: add GET_TIMELEFT option support   ivan.khoronzhuk
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   ivan.khoronzhuk
• Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property   ivan.khoronzhuk
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   ivan.khoronzhuk
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   ivan.khoronzhuk
• Fwd: [PATCH 8/8] arm: dts: keystone: add watchdog entry   ivan.khoronzhuk
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• Fwd: [PATCH 3/8] watchdog: davinci: add GET_TIMELEFT option support   ivan.khoronzhuk
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   ivan.khoronzhuk
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   ivan.khoronzhuk
• Fwd: [PATCH 1/8] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   ivan.khoronzhuk
• Fwd: [PATCH 4/8] watchdog: davinci: add GET_STATUS option support   ivan.khoronzhuk
• [PATCH 02/12] mtd: nand: davinci: check required ti, davinci-chipselect property   ivan.khoronzhuk
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   ivan.khoronzhuk
• [PATCH 10/12] mtd: nand: davinci: don't set timings if AEMIF is used   ivan.khoronzhuk
• [PATCH 6/7] mtd: nand: davinci: extend description of bindings   ivan.khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   ivan.khoronzhuk
• [PATCH 0/3] Reuse davinci-nand driver for Keystone arch   ivan.khoronzhuk
• [PATCH] clk: keystone: gate: don't use reserved bits   ivan.khoronzhuk
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   ivan.khoronzhuk
• Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch   ivan.khoronzhuk
• [PATCH 1/6] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property   ivan.khoronzhuk
• [PATCH v2 0/6] Update Davinci watchdog driver   ivan.khoronzhuk
• [PATCH v3 5/6] watchdog: davinci: reuse driver for keystone arch   ivan.khoronzhuk
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• [PATCH 1/3] mtd: nand: davinci: reuse driver for Keystone arch   ivan.khoronzhuk
• [PATCH v2 0/6] Update Davinci watchdog driver   ivan.khoronzhuk
• [PATCH 06/12] mtd: nand: davinci: adjust DT properties to MTD generic   ivan.khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   ivan.khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   ivan.khoronzhuk
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH v3 1/6] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   ivan.khoronzhuk
• [PATCH] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH] watchdog: davinci: rename platform driver to davinci-wdt   ivan.khoronzhuk
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v5 1/4] i2c: busses: i2c-st: Add ST I2C controller   srinivas kandagatla
• [PATCH RFC 07/10] PM / wakeup : Introduce device_child_may_wakeup   srinivas kandagatla
• [PATCH 1/2] ARM: sti: only select errata 764369 if SMP   srinivas kandagatla
• [PATCH 0/2] Fixes for STi SOCs   srinivas kandagatla
• [PATCH] ARM: orion5x: Fix typo in device_type property of phy node   srinivas kandagatla
• [PATCH v6 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   srinivas kandagatla
• [PATCH v6 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   srinivas kandagatla
• [PATCH v6 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   srinivas kandagatla
• a bug on NO_HZ_FULL_ALL   viresh kumar
• небесные, светло-зеленые, темно-карие - Ваши глаза будут прекрасны и привлекательны   linagorba02970
• ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   kasim ling
• [PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   kasim ling
• Patch "clockevents: Sanitize ticks to nsec conversion" has been added to the 3.10-stable tree   gregkh at linuxfoundation.org
• Patch "clockevents: Sanitize ticks to nsec conversion" has been added to the 3.11-stable tree   gregkh at linuxfoundation.org
• Patch "clockevents: Sanitize ticks to nsec conversion" has been added to the 3.4-stable tree   gregkh at linuxfoundation.org
• Some question about GIC v1 setting   loody
• Some question about GIC v1 setting   loody
• Some question about GIC v1 setting   loody
• Важный миг   lubov.en1976
• [PATCH] clk: align clock rate unit to unsigned long   chenxg at marvell.com
• [RFC PATCH] ARM: compressed: Move ramdisk forward to reserve more memory for kernel image   falcon at meizu.com
• [PATCH 2/4] mfd: rtsx: Generify the switch voltage routine   micky
• [PATCH 1/4] mfd: rtsx: Generify call-back operations in orderto reduce code duplication   micky
• [PATCH] ARM:clps711x:Enable ARM_PATCH_PHYS_VIRT by default   panchaxari
• [PATCH V2] ARM:clps711x:Enable ARM_PATCH_PHYS_VIRT by default   panchaxari
• [PATCH] ARM:EXYNOS:Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   panchaxari
• [PATCH RFC 00/10] ARM: STi: Add dwmac glue and reset controller   srinivas.kandagatla at st.com
• [PATCH RFC 01/10] drivers: reset: STi SoC system configuration reset controller support   srinivas.kandagatla at st.com
• [PATCH RFC 02/10] drivers: reset: Reset controller driver for STiH415   srinivas.kandagatla at st.com
• [PATCH RFC 03/10] drivers: reset: Reset controller driver for STiH416   srinivas.kandagatla at st.com
• [PATCH RFC 04/10] drivers: reset: stih415: add softreset controller   srinivas.kandagatla at st.com
• [PATCH RFC 05/10] drivers: reset: stih416: add softreset controller   srinivas.kandagatla at st.com
• [PATCH RFC 06/10] ARM: STi: Add reset controller support to mach-sti Kconfig   srinivas.kandagatla at st.com
• [PATCH RFC 07/10] PM / wakeup : Introduce device_child_may_wakeup   srinivas.kandagatla at st.com
• [PATCH RFC 08/10] net: stmmac:sti: Add STi SOC glue driver.   srinivas.kandagatla at st.com
• [PATCH RFC 09/10] ARM: STi: Add STiH415 ethernet support.   srinivas.kandagatla at st.com
• [PATCH RFC 10/10] ARM: STi: Add STiH416 ethernet support.   srinivas.kandagatla at st.com
• И товары их затем   stsuranova
• [PATCHv3] ARM: imx: add support code for IMX50 based machines   gerg at uclinux.org
• [PATCHv2] pinctrl: imx50: add pinctrl support code for the IMX50 SoC   gerg at uclinux.org
• Приветствую   yraiova1985
• [PATCH v4] dmaengine: Add hisilicon k3 DMA engine driver   zhangfei