kernel BUG at kernel/kallsyms.c:222!

[Axel Lin]

2013/11/8 Rusty Russell <rusty at rustcorp.com.au>:
> Axel Lin <axel.lin at ingics.com> writes:
>> 2013/11/7 Ming Lei <tom.leiming at gmail.com>:
>>> Hi,
>>>
>>> On Thu, Nov 7, 2013 at 10:47 AM, Axel Lin <axel.lin at ingics.com> wrote:
>>>>
>>>> hi Ming,
>>>> Seems CONFIG_PAGE_OFFSET is not configurabe in "make menuconfig".
>>>> And I found CONFIG_PAGE_OFFSET=0xC0000000 for all below configs...
>>>> $ make at91_dt_defconfig; grep  CONFIG_PAGE_OFFSET .config
>>>> $ make ep93xx_defconfig; grep  CONFIG_PAGE_OFFSET .config
>>>> $ make imx_v4_v5_defconfig; grep CONFIG_PAGE_OFFSET .config
>>>> $ make mxs_defconfig; grep CONFIG_PAGE_OFFSET .config
>>>> $ make omap2plus_defconfig; grep CONFIG_PAGE_OFFSET .config
>>>> $ make s3c6400_defconfig; grep CONFIG_PAGE_OFFSET .config
>>>> $ make at91x40_defconfig; grep CONFIG_PAGE_OFFSET .config
>>>> ( at91x40_defconfig is also arm7tdmi )
>>>
>>> Firstly it can be configured via VMSPLIT_3GVMSPLIT_2G/VMSPLIT_1G.
>>>
>>> Secondly, configurable or not isn't the point, and maybe some uclinux
>>> platforms do not use CONFIG_PAGE_OFFSET at all, but they should
>>> set it as a reasonable value or at least be below than the start link
>>> address of vmlinux.
>>
>> Hi Ming,
>>
>> I found in arch/arm/include/asm/memory.h:
>> CONFIG_PAGE_OFFSET is not used if !CONFIG_MMU.
>> So looks like setting CONFIG_PAGE_OFFSET to other value still won't work.
>
> This seems like the simplest solution, but it may mean you still have
> crap in /proc/kallsyms.
>
> Does it work for you?

Yes, it works.

Thanks,
Axel