[PATCH v2 1/6] net: MOXA ART: clear TX descriptor length bits between sends

[Jonas Jensen]

Add TX_DESC1_BUF_SIZE_MASK to bits that are cleared, before the TX buffer
length is set. Failing to do so can cause the controller to drop dead
i.e. all TX interrupts stop, resulting in complete communication failure.

Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---

Notes:
    Applies to next-20131125

 drivers/net/ethernet/moxa/moxart_ether.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index cbd0133..3c14afd 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -349,7 +349,8 @@ static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	txdes1 = readl(desc + TX_REG_OFFSET_DESC1);
 	txdes1 |= TX_DESC1_LTS | TX_DESC1_FTS;
-	txdes1 &= ~(TX_DESC1_FIFO_COMPLETE | TX_DESC1_INTR_COMPLETE);
+	txdes1 &= ~(TX_DESC1_FIFO_COMPLETE | TX_DESC1_INTR_COMPLETE |
+		    TX_DESC1_BUF_SIZE_MASK);
 	txdes1 |= (len & TX_DESC1_BUF_SIZE_MASK);
 	writel(txdes1, desc + TX_REG_OFFSET_DESC1);
 	writel(TX_DESC0_DMA_OWN, desc + TX_REG_OFFSET_DESC0);
-- 
1.8.2.1