[PATCH v5 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries
Loc Ho
lho at apm.com
Tue Nov 26 02:01:25 EST 2013
arm64: Add APM X-Gene SoC SATA host controller and clock DTS entries
Signed-off-by: Loc Ho <lho at apm.com>
Signed-off-by: Tuan Phan <tphan at apm.com>
Signed-off-by: Suman Tripathi <stripathi at apm.com>
---
arch/arm64/boot/dts/apm-storm.dtsi | 81 ++++++++++++++++++++++++++++++++++++
1 files changed, 81 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index f74c26a..fd8ff25 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,51 @@
reg-names = "csr-reg";
clock-output-names = "eth8clk";
};
+
+ sata01clk: sata01clk at 1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata01clk";
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata01clk";
+ status = "disabled";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
+
+ sata23clk: sata23clk at 1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata23clk";
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata23clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
+
+ sata45clk: sata45clk at 1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata45clk";
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata45clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
};
serial0: serial at 1c020000 {
@@ -224,5 +269,41 @@
apm-tx-boost-gain = <0x3 0x3 0x3 0x3 0x3 0x3>;
apm-tx-eye-tuning = <0xa 0xa 0xa 0xc 0xc 0xc>;
};
+
+ sata1: sata at 1a000000 {
+ compatible = "apm,xgene-ahci-sgmii";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x86 0x4>;
+ status = "disabled";
+ clocks = <&sata01clk 0>;
+ phys = <&phy1 0>;
+ phy-names = "sata-6g";
+ };
+
+ sata2: sata at 1a400000 {
+ compatible = "apm,xgene-ahci-sgmii";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x87 0x4>;
+ status = "ok";
+ clocks = <&sata23clk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-6g";
+ };
+
+ sata3: sata at 1a800000 {
+ compatible = "apm,xgene-ahci-pcie";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x88 0x4>;
+ status = "ok";
+ clocks = <&sata45clk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-6g";
+ };
};
};
--
1.5.5
More information about the linux-arm-kernel
mailing list