[PATCH 1/2] ARM: dts: i.MX51: Move usbphy0 node from AIPS1

[Alexander Shiyan]

usbphy0 is not a part of AIPS1, so move this node under root.
Additionally this patch removes useless "status" property.

Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
 arch/arm/boot/dts/imx51.dtsi | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index ee35090..29fda13 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -83,6 +83,19 @@
 		};
 	};
 
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		usbphy0: usbphy at 0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+			clock-names = "main_clk";
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -204,13 +217,6 @@
 				};
 			};
 
-			usbphy0: usbphy at 0 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-				clock-names = "main_clk";
-				status = "okay";
-			};
-
 			usbotg: usb at 73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
-- 
1.8.1.5