[PATCH v5 00/14] Armada 370/XP NAND support

[Daniel Mack]

On 11/15/2013 03:27 PM, Ezequiel Garcia wrote:
> On Fri, Nov 15, 2013 at 02:47:22PM +0100, Daniel Mack wrote:
>> On 11/15/2013 02:07 PM, Ezequiel Garcia wrote:
>>> On Fri, Nov 15, 2013 at 08:59:08AM +0100, Daniel Mack wrote:
>>>> On 11/15/2013 12:15 AM, Ezequiel Garcia wrote:
>>>>> On Thu, Nov 14, 2013 at 03:05:40PM -0800, Brian Norris wrote:
>>>>>> + Daniel (missed the CC)
>>>>>>
>>>>>> On Thu, Nov 14, 2013 at 03:04:36PM -0800, Brian Norris wrote:
>>>>>>> On Thu, Nov 14, 2013 at 06:25:25PM -0300, Ezequiel Garcia wrote:
>>>>>>>> * Changes from v4
>>>>>>>>
>>>>>>>>   * Rebased on top of l2-mtd.git origin/next branch
>>>>>>>>
>>>>>>>>   * Fixed is_ready flag reset, renamed by a more descriptive
>>>>>>>>     and readble "need_wait".
>>>>>>>>
>>>>>>>
>>>>>>> ...
>>>>>>>
>>>>>>> I think this series is now good as-is. Pushing to l2-mtd.git/next.
>>>>>>> Thanks for the efforts! I can submit my extra diff from patch 12 as a
>>>>>>> separate patch for review.
>>>>>>>
>>>>>>> Do you have any available regression tests? Or was there somebody else
>>>>>>> we could run this by for some Tested-by's? Daniel Mack, perhaps?
>>>>>>
>>>>>> Brian
>>>>>
>>>>> Yes, if Daniel (or anybody else) can push a Tested-by, that's better because
>>>>> he's a "third-party" tester.
>>>>
>>>> Yes. Sorry, I could only partially follow all the discussions around
>>>> these patch sets, but I can certainly do a quick regression test on my
>>>> pxa3xx platform.
>>>>
>>>> Ezequiel, could you maybe point me to a repository where I can pull
>>>> everything from you want me to have a look at?
>>>>
>>>
>>> Latest work is at the next branch in l2-mtd.git:
>>>
>>> http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/next
>>>
>>> You could try that, with Brian's latest patch:
>>>
>>> http://patchwork.ozlabs.org/patch/291408/
>>
>> Thanks Ezequiel! Tested with and without DMA on my PXA3xx platform and
>> it seems to work just well. Awesome work :)
>>
>> [    2.675715] NAND device: Manufacturer ID: 0x20, Chip ID: 0xa1 (ST
>> Micro NAND01GR3B2CZA6)
>> [    2.683965] NAND device: 128MiB, SLC, page size: 2048, OOB size: 64
>> [    2.690867] Scanning device for bad blocks
>> [    2.977987] Bad eraseblock 528 at 0x000004200000
>> [    2.983394] Bad eraseblock 529 at 0x000004220000
>> [    3.251150] 4 ofpart partitions found on MTD device pxa3xx_nand-0
>> [    3.257313] Creating 4 MTD partitions on "pxa3xx_nand-0":
>> [    3.263051] 0x000000000000-0x0000000a0000 : "Bootloader"
>> [    3.278845] 0x0000000a0000-0x0000000c0000 : "BootloaderEnvironment"
>> [    3.296388] 0x0000000c0000-0x000000120000 : "BootloaderSplashScreen"
>> [    3.314704] 0x000000120000-0x000008000000 : "UBI"
>>
> 
> Good news! Have you tried with Brian's patch [1]?

Yes. l2-mtd 'next' branch + Brian's patch.

> In that case, is this a Tested-by?
> 
> [1] http://patchwork.ozlabs.org/patch/291408/

  Tested-by: Daniel Mack <zonque at gmail.com>


Daniel