[PATCH 4/5] ARM: dts: Add basic support for omap3 LDP zoom1 labrador
Tony Lindgren
tony at atomide.com
Fri Nov 15 19:36:06 EST 2013
Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
and GPIO keys work.
For twl4030-keypad we're still missing the binding, but
support for that should be trivial to add once the driver
has been updated.
MUSB I'm pretty sure I got got to enumerate once, but I
suspect the battery charging somehow disrupts it and it's
not enumerating in general for some reason.
Patches are welcome to improve things if people are
still using this board.
For reference, here's some more info on this old board:
http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo
Cc: devicetree at vger.kernel.org
Cc: "Benoît Cousson" <bcousson at baylibre.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-ldp.dts | 231 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 232 insertions(+)
create mode 100644 arch/arm/boot/dts/omap3-ldp.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index de37094..fc37bca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
+ omap3-ldp.dtb \
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
new file mode 100644
index 0000000..ddce0d8
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+ model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+ compatible = "ti,omap3-ldp", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ cpus {
+ cpu at 0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins>;
+
+ key_enter {
+ label = "enter";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+ linux,code = <0x0107001c>; /* KEY_ENTER */
+ gpio-key,wakeup;
+ };
+
+ key_f1 {
+ label = "f1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+ linux,code = <0x0303003b>; /* KEY_F1 */
+ gpio-key,wakeup;
+ };
+
+ key_f2 {
+ label = "f2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+ linux,code = <0x0403003c>; /* KEY_F2 */
+ gpio-key,wakeup;
+ };
+
+ key_f3 {
+ label = "f3";
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+ linux,code = <0x0503003d>; /* KEY_F3 */
+ gpio-key,wakeup;
+ };
+
+ key_f4 {
+ label = "f4";
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+ linux,code = <0x0704003e>; /* KEY_F4 */
+ gpio-key,wakeup;
+ };
+
+ key_left {
+ label = "left";
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+ linux,code = <0x04070069>; /* KEY_LEFT */
+ gpio-key,wakeup;
+ };
+
+ key_right {
+ label = "right";
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+ linux,code = <0x0507006a>; /* KEY_RIGHT */
+ gpio-key,wakeup;
+ };
+
+ key_up {
+ label = "up";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+ linux,code = <0x06070067>; /* KEY_UP */
+ gpio-key,wakeup;
+ };
+
+ key_down {
+ label = "down";
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+ linux,code = <0x0707006c>; /* KEY_DOWN */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x01000000>,
+ <1 0 0x08000000 0x01000000>;
+
+ nand at 0,0 {
+ linux,mtd-name= "micron,nand";
+ reg = <0 0 0>;
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition at 80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x140000>;
+ };
+ partition at 1c0000 {
+ label = "Environment";
+ reg = <0x1c0000 0x40000>;
+ };
+ partition at 200000 {
+ label = "Kernel";
+ reg = <0x200000 0x1e00000>;
+ };
+ partition at 2000000 {
+ label = "Filesystem";
+ reg = <0x2000000 0xe000000>;
+ };
+ };
+
+ ethernet at gpmc {
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reg = <1 0 0xff>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl at 48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: pinmux_gpio_key_pins {
+ pinctrl-single,pins = <
+ 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
+ 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
+ 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
+ 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
+ 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
+ 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
+ 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
+ 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
+ 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ >;
+ };
+
+ musb_pins: pinmux_musb_pins {
+ pinctrl-single,pins = <
+ 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ >;
+ };
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&musb_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux1 {
+ /* Needed for ads7846 */
+ regulator-name = "vcc";
+};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
--
1.8.1.1
More information about the linux-arm-kernel
mailing list