[PATCH RFC v2 05/17] ARM: shmobile: r8a7779: Reference clocks

[Laurent Pinchart]

Hi Simon,

Thank you for the patch.

On Tuesday 26 November 2013 16:32:07 Simon Horman wrote:
> Reference clocks using a "clocks" property in all nodes corresponding to
> devices that require a clock.

There's a sata node in your latest devel branch that you're missing.

> Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> ---
>  arch/arm/boot/dts/r8a7779.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index d524b3f..623dd39 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -160,6 +160,7 @@
>  		reg = <0xffc70000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
>  		status = "disabled";
>  	};
> 
> @@ -170,6 +171,7 @@
>  		reg = <0xffc71000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
>  		status = "disabled";
>  	};
> 
> @@ -180,6 +182,7 @@
>  		reg = <0xffc72000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
>  		status = "disabled";
>  	};
> 
> @@ -190,6 +193,7 @@
>  		reg = <0xffc73000 0x1000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
>  		status = "disabled";
>  	};
> 
> @@ -215,6 +219,7 @@
>  		reg = <0xffe4c000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -225,6 +230,7 @@
>  		reg = <0xffe4d000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -235,6 +241,7 @@
>  		reg = <0xffe4e000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
> @@ -245,6 +252,7 @@
>  		reg = <0xffe4f000 0x100>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
>  		cap-sd-highspeed;
>  		cap-sdio-irq;
>  		status = "disabled";
-- 
Regards,

Laurent Pinchart