[PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle

[Peter Chen]

On Tue, Nov 05, 2013 at 10:34:06AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote:
> > Add anatop phandle which is used to access anatop registers to
> > control PHY's power and other USB operations.
> > 
> > Signed-off-by: Peter Chen <peter.chen at freescale.com>
> > ---
> >  Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
> >  1 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > index 5835b27..e2d5211 100644
> > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > @@ -4,10 +4,12 @@ Required properties:
> >  - compatible: Should be "fsl,imx23-usbphy"
> 
> This needs update too, as we now have another two compatible strings.
> 

One question, this is needed to change when adding compatible string
to dts or using that compatible string at driver?

> >  - reg: Should contain registers location and length
> >  - interrupts: Should contain phy interrupt
> > +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial
> 
> imx6 SoC series
> 

Will change

-- 

Best Regards,
Peter Chen