[PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle
Shawn Guo
shawn.guo at linaro.org
Mon Nov 4 21:34:06 EST 2013
On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote:
> Add anatop phandle which is used to access anatop registers to
> control PHY's power and other USB operations.
>
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
> Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> index 5835b27..e2d5211 100644
> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> @@ -4,10 +4,12 @@ Required properties:
> - compatible: Should be "fsl,imx23-usbphy"
This needs update too, as we now have another two compatible strings.
> - reg: Should contain registers location and length
> - interrupts: Should contain phy interrupt
> +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial
imx6 SoC series
Shawn
>
> Example:
> usbphy1: usbphy at 020c9000 {
> compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> reg = <0x020c9000 0x1000>;
> interrupts = <0 44 0x04>;
> + fsl,anatop = <&anatop>;
> };
> --
> 1.7.1
>
>
More information about the linux-arm-kernel
mailing list