[PATCH/RESEND] clocksource: armada-370-xp: Enable timer divider only when needed
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Fri Nov 29 13:04:50 EST 2013
The current code sets the timer divider bits always. However, when
the 25 MHz timer is enabled, this is not needed and has no effect.
As this causes some confusion, rework the code so the divider is
set only when needed, i.e. when the 25 MHz timer is not in use.
Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
Resending as per Daniel's request
drivers/clocksource/time-armada-370-xp.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 4e7f680..ee8691b 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -76,6 +76,7 @@
static void __iomem *timer_base, *local_base;
static unsigned int timer_clk;
static bool timer25Mhz = true;
+static u32 enable_mask;
/*
* Number of timer ticks per jiffy.
@@ -121,8 +122,7 @@ armada_370_xp_clkevt_next_event(unsigned long delta,
/*
* Enable the timer.
*/
- local_timer_ctrl_clrset(TIMER0_RELOAD_EN,
- TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ local_timer_ctrl_clrset(TIMER0_RELOAD_EN, enable_mask);
return 0;
}
@@ -141,9 +141,7 @@ armada_370_xp_clkevt_mode(enum clock_event_mode mode,
/*
* Enable timer.
*/
- local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN |
- TIMER0_EN |
- TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
} else {
/*
* Disable timer.
@@ -240,10 +238,13 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
WARN_ON(!timer_base);
local_base = of_iomap(np, 1);
- if (timer25Mhz)
+ if (timer25Mhz) {
set = TIMER0_25MHZ;
- else
+ enable_mask = TIMER0_EN;
+ } else {
clr = TIMER0_25MHZ;
+ enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
+ }
timer_ctrl_clrset(clr, set);
local_timer_ctrl_clrset(clr, set);
@@ -262,8 +263,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
- timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN |
- TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
/*
* Set scale and timer for sched_clock.
--
1.8.1.5
More information about the linux-arm-kernel
mailing list