[PATCH v3 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem
Matt Porter
matt.porter at linaro.org
Mon Nov 25 13:16:04 EST 2013
Adds support for querying the phy bus width from the generic phy
subsystem. Configure UTMI bus width in GUSBCFG based on this value.
Signed-off-by: Matt Porter <matt.porter at linaro.org>
---
drivers/usb/gadget/s3c-hsotg.c | 14 +++++++++++++-
drivers/usb/gadget/s3c-hsotg.h | 1 +
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8dfe33f..be41585 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -144,6 +144,7 @@ struct s3c_hsotg_ep {
* @regs: The memory area mapped for accessing registers.
* @irq: The IRQ number we are using
* @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
* @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
* @num_of_eps: Number of available EPs (excluding EP0)
* @debug_root: root directrory for debugfs.
@@ -171,6 +172,7 @@ struct s3c_hsotg {
struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+ u32 phyif;
unsigned int dedicated_fifos:1;
unsigned char num_of_eps;
@@ -2276,7 +2278,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
*/
/* set the PLL on, remove the HNP/SRP and set the PHY */
- writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+ writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
(0x5 << 10), hsotg->regs + GUSBCFG);
s3c_hsotg_init_fifo(hsotg);
@@ -3622,6 +3624,16 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
goto err_supplies;
}
+ /* Set default UTMI width */
+ hsotg->phyif = GUSBCFG_PHYIf16;
+
+ /*
+ * If using the generic PHY framework, check if the PHY bus
+ * width is 8-bit and set the phyif appropriately.
+ */
+ if (hsotg->phy && (phy_get_bus_width(phy) == 8))
+ hsotg->phyif = GUSBCFG_PHYIf8;
+
if (hsotg->phy)
phy_init(hsotg->phy);
diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h
index d650b12..85f549f 100644
--- a/drivers/usb/gadget/s3c-hsotg.h
+++ b/drivers/usb/gadget/s3c-hsotg.h
@@ -55,6 +55,7 @@
#define GUSBCFG_HNPCap (1 << 9)
#define GUSBCFG_SRPCap (1 << 8)
#define GUSBCFG_PHYIf16 (1 << 3)
+#define GUSBCFG_PHYIf8 (0 << 3)
#define GUSBCFG_TOutCal_MASK (0x7 << 0)
#define GUSBCFG_TOutCal_SHIFT (0)
#define GUSBCFG_TOutCal_LIMIT (0x7)
--
1.8.4
More information about the linux-arm-kernel
mailing list