[PATCH 2/2] ASoC: ab8500: Revert "ASoC: ab8500: Convert register I/O to regmap"
Lee Jones
lee.jones at linaro.org
Wed Nov 6 04:54:45 EST 2013
This reverts commit ff795d614bfa62a3c6fc0bcb75cb8842e5a87892, as this
is one of two patches which stop audio from working on Snowball.
Cc: alsa-devel at alsa-project.org
Cc: Mark Brown <broonie at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
sound/soc/codecs/ab8500-codec.c | 64 ++++++++++++++++++++++-------------------
1 file changed, 34 insertions(+), 30 deletions(-)
diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
index ca500fd..7990217 100644
--- a/sound/soc/codecs/ab8500-codec.c
+++ b/sound/soc/codecs/ab8500-codec.c
@@ -126,8 +126,6 @@ struct ab8500_codec_drvdata_dbg {
/* Private data for AB8500 device-driver */
struct ab8500_codec_drvdata {
- struct regmap *regmap;
-
/* Sidetone */
long *sid_fir_values;
enum sid_state sid_status;
@@ -168,34 +166,48 @@ static inline const char *amic_type_str(enum amic_type type)
*/
/* Read a register from the audio-bank of AB8500 */
-static int ab8500_codec_read_reg(void *context, unsigned int reg,
- unsigned int *value)
+static unsigned int ab8500_codec_read_reg(struct snd_soc_codec *codec,
+ unsigned int reg)
{
- struct device *dev = context;
int status;
+ unsigned int value = 0;
u8 value8;
- status = abx500_get_register_interruptible(dev, AB8500_AUDIO,
- reg, &value8);
- *value = (unsigned int)value8;
+ status = abx500_get_register_interruptible(codec->dev, AB8500_AUDIO,
+ reg, &value8);
+ if (status < 0) {
+ dev_err(codec->dev,
+ "%s: ERROR: Register (0x%02x:0x%02x) read failed (%d).\n",
+ __func__, (u8)AB8500_AUDIO, (u8)reg, status);
+ } else {
+ dev_dbg(codec->dev,
+ "%s: Read 0x%02x from register 0x%02x:0x%02x\n",
+ __func__, value8, (u8)AB8500_AUDIO, (u8)reg);
+ value = (unsigned int)value8;
+ }
- return status;
+ return value;
}
/* Write to a register in the audio-bank of AB8500 */
-static int ab8500_codec_write_reg(void *context, unsigned int reg,
- unsigned int value)
+static int ab8500_codec_write_reg(struct snd_soc_codec *codec,
+ unsigned int reg, unsigned int value)
{
- struct device *dev = context;
+ int status;
- return abx500_set_register_interruptible(dev, AB8500_AUDIO,
- reg, value);
-}
+ status = abx500_set_register_interruptible(codec->dev, AB8500_AUDIO,
+ reg, value);
+ if (status < 0)
+ dev_err(codec->dev,
+ "%s: ERROR: Register (%02x:%02x) write failed (%d).\n",
+ __func__, (u8)AB8500_AUDIO, (u8)reg, status);
+ else
+ dev_dbg(codec->dev,
+ "%s: Wrote 0x%02x into register %02x:%02x\n",
+ __func__, (u8)value, (u8)AB8500_AUDIO, (u8)reg);
-static const struct regmap_config ab8500_codec_regmap = {
- .reg_read = ab8500_codec_read_reg,
- .reg_write = ab8500_codec_write_reg,
-};
+ return status;
+}
/*
* Controls - DAPM
@@ -2476,8 +2488,6 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
/* Setup AB8500 according to board-settings */
pdata = dev_get_platdata(dev->parent);
- codec->control_data = drvdata->regmap;
-
if (np) {
if (!pdata)
pdata = devm_kzalloc(dev,
@@ -2555,6 +2565,9 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
static struct snd_soc_codec_driver ab8500_codec_driver = {
.probe = ab8500_codec_probe,
+ .read = ab8500_codec_read_reg,
+ .write = ab8500_codec_write_reg,
+ .reg_word_size = sizeof(u8),
.controls = ab8500_ctrls,
.num_controls = ARRAY_SIZE(ab8500_ctrls),
.dapm_widgets = ab8500_dapm_widgets,
@@ -2577,15 +2590,6 @@ static int ab8500_codec_driver_probe(struct platform_device *pdev)
drvdata->anc_status = ANC_UNCONFIGURED;
dev_set_drvdata(&pdev->dev, drvdata);
- drvdata->regmap = devm_regmap_init(&pdev->dev, NULL, &pdev->dev,
- &ab8500_codec_regmap);
- if (IS_ERR(drvdata->regmap)) {
- status = PTR_ERR(drvdata->regmap);
- dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
- __func__, status);
- return status;
- }
-
dev_dbg(&pdev->dev, "%s: Register codec.\n", __func__);
status = snd_soc_register_codec(&pdev->dev, &ab8500_codec_driver,
ab8500_codec_dai,
--
1.8.1.2
More information about the linux-arm-kernel
mailing list