[PATCH] ARM: dts: imx6q-udoo: Add Ethernet support
Fabio Estevam
fabio.estevam at freescale.com
Tue Nov 12 10:40:23 EST 2013
Add Ethernet support for imx6q udoo board.
Tested by booting a kernel via NFS.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
arch/arm/boot/dts/imx6q-udoo.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index 1b5104d..1c7f7a1 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -21,8 +21,19 @@
};
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
&iomuxc {
imx6q-udoo {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <MX6QDL_ENET_PINGRP1>;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <MX6QDL_UART2_PINGRP1>;
};
--
1.8.1.2
More information about the linux-arm-kernel
mailing list