[PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks
Gururaja Hebbar
gururaja.hebbar at ti.com
Thu Nov 7 23:07:09 EST 2013
On Thursday 07 November 2013 11:07 PM, Daniel Mack wrote:
> Hi Joel,
>
> On 11/07/2013 05:34 PM, Joel Fernandes wrote:
>> Thanks for your followup patch on this. It looks much better now using existing
>> functions to save/restore the state.
>
> Yes, thanks for the suggesting it in the first place.
>
>> On 10/30/2013 03:21 PM, Daniel Mack wrote:
>>> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
>> [..]
>>> +static int edma_pm_resume(struct device *dev)
>>> +{
>>> + int i, j;
>>> +
>>> + pm_runtime_get_sync(dev);
>>> +
>>> + for (j = 0; j < arch_num_cc; j++) {
>>> + struct edma *cc = edma_cc[j];
>>> +
>>> + s8 (*queue_priority_mapping)[2];
>>> + s8 (*queue_tc_mapping)[2];
>>> +
>>> + queue_tc_mapping = cc->info->queue_tc_mapping;
>>> + queue_priority_mapping = cc->info->queue_priority_mapping;
>>> +
>>> + /* Event queue to TC mapping */
>>> + for (i = 0; queue_tc_mapping[i][0] != -1; i++)
>>> + map_queue_tc(j, queue_tc_mapping[i][0],
>>> + queue_tc_mapping[i][1]);
>>> +
>>> + /* Event queue priority mapping */
>>> + for (i = 0; queue_priority_mapping[i][0] != -1; i++)
>>> + assign_priority_to_queue(j,
>>> + queue_priority_mapping[i][0],
>>> + queue_priority_mapping[i][1]);
>>
>> I know ti,edma-regions property is not currently being used, but we should
>> future proof this by setting up DRAE for like done in probe:
>>
>> for (i = 0; i < info[j]->n_region; i++) {
>> edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
>> edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
>> edma_write_array(j, EDMA_QRAE, i, 0x0);
>> }
>
> That doesn't work for me. I'm running long-time tests here on a device
> which has a mwifiex connected to omap_hsmmc. The test procedure includes:
>
> a) a script on the device that puts the device to sleep some seconds
> after it has been woken up
>
> b) a script on a host that wakes up the device with wake-on-lan every 10
> seconds
>
> c) a flood ping that checks whether the device is responding
can you share above 2 (b & C) test scripts? (pastebin or inline if small)
thanks in advance
regards
Gururaja
>
>
> That precedure is running since a couple of hourse here, and it works
> well with both by v3 and v4 patches. Moving the functions to
> .suspend/resume _noirq doesn't seem to break anything.
>
> Setting QRAE to 0 as you mentioned above, however, makes the device fail
> at resume.
>
>>> +static SIMPLE_DEV_PM_OPS(edma_pm_ops, edma_pm_suspend, edma_pm_resume);
>>
>> I agree with Nishanth here, it is better to do this in .suspend/resume _noirq
>> stage to rule out any ordering bugs that may show up in the future, since such
>> an issue already showed up in earlier testing.
>
> Alright, I already did that.
>
>> I would appreciate it if you can make these 2 changes and post a v5. Thanks for
>> a lot for all the hardwork.
>
> No problem at all :)
>
>> Acked-by: Joel Fernandes <joelf at ti.com>
>
> Still sure about that? What about your follow-up to your own reply?
>
>
> Many thanks for all the feedback!
>
> Daniel
>
>
>
>
More information about the linux-arm-kernel
mailing list