[PATCH v7 2/7] ARM: dts: imx27 pingroups
Markus Pargmann
mpa at pengutronix.de
Tue Nov 12 03:50:05 EST 2013
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
arch/arm/boot/dts/imx27-pingrp.h | 71 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 arch/arm/boot/dts/imx27-pingrp.h
diff --git a/arch/arm/boot/dts/imx27-pingrp.h b/arch/arm/boot/dts/imx27-pingrp.h
new file mode 100644
index 0000000..08d8d18
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pingrp.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa at pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __DTS_IMX27_PINGRP_H
+#define __DTS_IMX27_PINGRP_H
+
+#include "imx27-pinfunc.h"
+
+#define MX27_FEC1_PINGRP1 \
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0 \
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0 \
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 \
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 \
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 \
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 \
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 \
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 \
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 \
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0 \
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0 \
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 \
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 \
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 \
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 \
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0 \
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 \
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+
+#define MX27_I2C1_PINGRP1 \
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0 \
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+
+#define MX27_I2C2_PINGRP1 \
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 \
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+
+#define MX27_OWIRE1_PINGRP1 \
+ MX27_PAD_RTCK__OWIRE 0x0
+
+#define MX27_UART1_PINGRP1 \
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0 \
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+
+#define MX27_UART1_RTSCTS_PINGRP1 \
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0 \
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+
+#define MX27_UART2_PINGRP1 \
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0 \
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+
+#define MX27_UART2_RTSCTS_PINGRP1 \
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0 \
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+
+#define MX27_UART3_PINGRP1 \
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0 \
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+
+#define MX27_UART3_RTSCTS_PINGRP1 \
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0 \
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+
+#endif /* __DTS_IMX27_PINGRP_H */
--
1.8.4.2
More information about the linux-arm-kernel
mailing list